ZScoUsers.py

@@ -261,7 +261,7 @@ class ZScoUsers(
 
     security.declareProtected(ScoUsersAdmin, "user_info")
 
-    def user_info(self, user_name=None, user=None, format=None, REQUEST=None):
+    def user_info(self, user_name=None, user=None):
         """Donne infos sur l'utilisateur (qui peut ne pas etre dans notre base).
         Si user_name est specifie, interroge la BD. Sinon, user doit etre un dict.
         """
@@ -322,7 +322,7 @@ class ZScoUsers(
             # nomnoacc est le nom en minuscules sans accents
             info["nomnoacc"] = scu.suppress_accents(scu.strlower(info["nom"]))
 
-            return scu.sendResult(REQUEST, info, name="user", format=format)
+            return info
 
     def _can_handle_passwd(self, authuser, user_name, allow_admindepts=False):
         """true if authuser can see or change passwd of user_name.

config/config.sh

@@ -34,11 +34,9 @@ export POSTGRES_USER=www-data
 if [ "${debian_version}" = "10" ]
 then
  PSQL=/usr/lib/postgresql/11/bin/psql
- export POSTGRES_SERVICE="postgresql@11-main.service"
 elif [ "${debian_version}" = "9" ]
 then
  PSQL=/usr/lib/postgresql/9.6/bin/psql
- export POSTGRES_SERVICE="postgresql"
 elif [ "${debian_version}" = "8" ] 
 then
  PSQL=/usr/lib/postgresql/9.4/bin/psql

config/configure_systemd.sh

@@ -8,13 +8,7 @@ source utils.sh
 check_uid_root $0
 
 echo 'Installation du demarrage automatique de ScoDoc (systemd)'
-
-# La variable POSTGRES_SERVICE doit être positionnée dans config.sh
-# suivant la version de Debian et de postgresql
-[ -z "${POSTGRES_SERVICE}" ] && die "incompatible Debian version"
-
-cat "$SCODOC_DIR/config/etc/scodoc.service" | sed 's/{{postgresql}}/'"${POSTGRES_SERVICE}"'/g' > /etc/systemd/system/scodoc.service
-
+cp $SCODOC_DIR/config/etc/scodoc.service /etc/systemd/system
 systemctl enable scodoc.service
 
 echo "A partir de maintenant, utiliser"

config/etc/scodoc.service

@@ -1,15 +1,13 @@
 # ScoDoc7 service 
 #  Zope based
-#  Depends on {{postgresql}} (replaced by installation script by 
-#    postgresql@11-main.service on Debian 10
-#    postgresql on Debian <= 9
-#  => is restarted when {{postgresql}} restarts
+#  Depends on postgresql
+#  => is restarted when postgresql restarts
 #
 [Unit]
 Description=ScoDoc 7 service
-After=network.target {{postgresql}}
-Requires={{postgresql}}
-PartOf={{postgresql}}
+After=network.target postgresql
+Requires=postgresql
+PartOf=postgresql
 StartLimitIntervalSec=0
 
 [Service]
@@ -23,4 +21,4 @@ ExecStop=/opt/scodoc/bin/zopectl stop
 ExecReload=/opt/scodoc/bin/zopectl restart
 
 [Install]
-WantedBy={{postgresql}}
+WantedBy=postgresql

config/install_debian10.sh

@@ -220,7 +220,9 @@ read ans
 if [ "$(norm_ans "$ans")" != 'N' ]
 then
     # ScoDoc 7.19+ uses systemd
-    $SCODOC_DIR/config/configure_systemd.sh
+    echo 'Installation du demarrage automatique de ScoDoc (systemd)'
+    cp $SCODOC_DIR/config/etc/scodoc.service /etc/systemd/system
+    systemctl enable scodoc.service
 fi
 
 

config/softs/pyExcelerator-0.6.3a.patched/.cvsignore

@@ -1 +0,0 @@
-build

config/softs/pyExcelerator-0.6.3a.patched/CHANGES.txt

@@ -1,68 +0,0 @@
-0.4.0a (27.03.2005)
----------
-    * First public version
-
-0.5.0a (11.05.2005)
----------
-    * pyExcelerator now can import Excel 5/95/97/2000/XP/2003 files.
-      With imported information you can do what you want.
-      See ./examples/xls2txt.py for reference.
-    * fixed bug in MS OLE2 compound document dumper (not in writer :))
-      Bug causes dumper to combine links in sectors' allocation chain sectors
-      contained in additional MSAT with SAT data.
-    * Excel files dumper supports now Excel 5/95/97/2000/XP/2003 files
-      and produces more informative output.
-      
-0.5.1a (14.05.2005)
----------
-    * improved floating point decoding code
-
-0.5.2a (18.05.2005)
----------
-    * improved perfomance (especially on nonfragmented streams)
-    * now pyExcelerator can process XLS files with short streams
-    * OLE2 compound document dumper supports short streams
-    * reading UTF-16-LE and Latin-1 with more accuracy
-    * in DSF (double stream file) XLS data extracted from stream "Workbook"
-    * improved floating point/integer values decoding code
-
-0.5.3a (19.05.2005)
----------
-    * typos in biff-dumper.py fixed :(
-    * now pyExcelerator can correctly import XLS files with charts
-    * added ability to override default file's encoding
-    * new examples (or tools :)) -- ./examples/xls2csv.py, ./examples/xls2html.py
-
-0.6.0a (19.07.2005)
----------
-    * blanks, numbers, currency (use number formats!) and dates (use number formats!)
-    * pyExcelerator uses 1.5-2 times less memory (thanks to __brains__ and __slots__)
-    * fixes for Big Endian CPUs
-    * some refactorings
-    * new examples: blanks.py, merged1.py, dates.py, numbers.py, num_formats.py, formulas.py
-    * most important change: formulas support
-
-0.6.1a (29.09.2005)
----------
-    * fixed: exception when reading OLE2 files with incorrect MSAT
-      (sector ids points to nonexistense sectors)
-
-0.6.2a (30.09.2005)
----------
-    * fixed: exception when reading OLE2 files with incorrect SSAT
-      (sector ids points to nonexistense sectors)
-
-0.6.3a (25.10.2005)
----------
-    * slightly new algorithm for reading OLE2 files. I hope it is
-      more robust
-    * splitting and frozing
-    * worksheet protection
-    * protection password
-    * workbook protection
-    * new example: protection.py, hyperlinks.py, panes.py
-    * extracting formula results
-    * speed optmizations(for example, benchmark big-35Mb.py runs about 
-      20-30% faster)
-    * updated THANKS file
-    * xls2csv, xls2txt, xls2html now resides in ./tools

config/softs/pyExcelerator-0.6.3a.patched/CVS/Entries

@@ -1,13 +0,0 @@
-/.cvsignore/1.1/Thu May 19 09:27:42 2005//
-D/examples////
-D/hrc////
-D/museum////
-D/pyExcelerator////
-D/tools////
-/LICENSE.txt/1.3/Tue Jul 19 18:58:44 2005//
-/README.txt/1.3/Sat Aug 13 23:25:44 2005//
-/TODO.txt/1.2/Wed Aug 10 20:42:08 2005//
-/CHANGES.txt/1.11/Tue Oct 25 19:34:26 2005//
-/PKG-INFO/1.5/Tue Oct  4 20:19:20 2005//
-/THANKS.txt/1.3/Thu Oct 20 20:46:16 2005//
-/setup.py/1.10/Wed Oct 26 07:44:23 2005//

config/softs/pyExcelerator-0.6.3a.patched/CVS/Entries.Extra

@@ -1,13 +0,0 @@
-/.cvsignore////*///
-D/examples///////
-D/hrc///////
-D/museum///////
-D/pyExcelerator///////
-D/tools///////
-/LICENSE.txt////*///
-/README.txt////*///
-/TODO.txt////*///
-/CHANGES.txt////*///
-/PKG-INFO////*///
-/THANKS.txt////*///
-/setup.py////*///

config/softs/pyExcelerator-0.6.3a.patched/CVS/Entries.Extra.Old

@@ -1,13 +0,0 @@
-/.cvsignore////*///
-D/examples///////
-D/hrc///////
-D/museum///////
-D/pyExcelerator///////
-D/tools///////
-/LICENSE.txt////*///
-/THANKS.txt////*///
-/README.txt////*///
-/TODO.txt////*///
-/CHANGES.txt////*///
-/PKG-INFO////*///
-/setup.py////*///

config/softs/pyExcelerator-0.6.3a.patched/CVS/Entries.Old

@@ -1,13 +0,0 @@
-/.cvsignore/1.1/Thu May 19 09:27:42 2005//
-D/examples////
-D/hrc////
-D/museum////
-D/pyExcelerator////
-D/tools////
-/LICENSE.txt/1.3/Tue Jul 19 18:58:44 2005//
-/THANKS.txt/1.2/Thu Sep 29 18:06:58 2005//
-/README.txt/1.3/Sat Aug 13 23:25:44 2005//
-/TODO.txt/1.2/Wed Aug 10 20:42:08 2005//
-/CHANGES.txt/1.10/Fri Sep 30 09:14:44 2005//
-/PKG-INFO/1.4/Fri Sep 30 09:13:49 2005//
-/setup.py/1.9/Fri Sep 30 09:20:04 2005//

config/softs/pyExcelerator-0.6.3a.patched/CVS/Repository

@@ -1 +0,0 @@
-pyExcelerator

config/softs/pyExcelerator-0.6.3a.patched/CVS/Root

@@ -1 +0,0 @@
-:ext:rvk@cvs.sf.net:/cvsroot/pyexcelerator

config/softs/pyExcelerator-0.6.3a.patched/LICENSE.txt

@@ -1,47 +0,0 @@
-  Copyright (C) 2005 Roman V. Kiseliov
-  All rights reserved.
- 
-  Redistribution and use in source and binary forms, with or without
-  modification, are permitted provided that the following conditions
-  are met:
- 
-  1. Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
- 
-  2. Redistributions in binary form must reproduce the above copyright
-     notice, this list of conditions and the following disclaimer in
-     the documentation and/or other materials provided with the
-     distribution.
- 
-  3. All advertising materials mentioning features or use of this
-     software must display the following acknowledgment:
-     "This product includes software developed by
-      Roman V. Kiseliov <roman@kiseliov.ru>."
- 
-  4. Redistributions of any form whatsoever must retain the following
-     acknowledgment:
-     "This product includes software developed by
-      Roman V. Kiseliov <roman@kiseliov.ru>."
- 
-  THIS SOFTWARE IS PROVIDED BY Roman V. Kiseliov ``AS IS'' AND ANY
-  EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-  PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL Roman V. Kiseliov OR
-  ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-  HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
-  OF THE POSSIBILITY OF SUCH DAMAGE.
-
-Roman V. Kiseliov
-Russia
-Kursk
-Libknecht St., 4
-
-+7(0712)56-09-83
-
-<roman@kiseliov.ru>
-Subject: pyExcelerator

config/softs/pyExcelerator-0.6.3a.patched/PKG-INFO

@@ -1,20 +0,0 @@
-Metadata-Version: 1.0
-Name: pyExcelerator
-Version: 0.6.3a1
-Summary: Library to generate Microsoft Excel (tm) spreadsheet files or to extract data from such files
-Home-page: http://www.sourceforge.net/projects/pyexcelerator
-Author: Roman V. Kiseliov
-Author-email: roman@kiseliov.ru
-License: BSD
-Download-URL: http://www.sourceforge.net/projects/pyexcelerator
-Description: Generate Excel 97+ files. Extract data from Excel 95+ spreadsheets. Full-blown UNICODE support. Pure Python code.
-Keywords: xls,excel,spreadsheet,workbook
-Platform: Platform-independent
-Classifier: Development Status :: 3 - Alpha
-Classifier: Intended Audience :: Developers
-Classifier: License :: OSI Approved :: BSD License
-Classifier: Programming Language :: Python
-Classifier: Operating System :: OS Independent
-Classifier: Topic :: Database
-Classifier: Topic :: Office/Business
-Classifier: Topic :: Software Development :: Libraries :: Python Modules

config/softs/pyExcelerator-0.6.3a.patched/README.txt

@@ -1,145 +0,0 @@
-
-                        pyExcelerator
-                    --------------------
-
-
-                                                         Dedicated to Olya. 
-                                                With you it can be reality.
-
-
-
-0x0000. What's this?
---------------------
-This   is   a    library   for   generating   Excel   97/2000/XP/2003   and
-OpenOffice    Calc   compatible     spreadsheets.     pyExcelerator     has
-full-blown   support   for  UNICODE  in Excel and Calc spreadsheets, allows
-using variety of formatting features,   provides   interface   to  printing
-options   of   Excel   and OpenOffice  Calc.  pyExcelerator  contains  also
-Excel BIFF8 dumper and MS compound  documents  dumper.  Main  advantage  is
-possibility of generating Excel  spreadsheets  without  MS  Windows  and/or
-COM  servers.  The  only requirement -- Python 2.4a3 or higher.
-
-
-0x0001. Why?
---------------------
-I  had need to generate .xls with UNICODE under FreeBSD.
-
-
-0x0002. Requirements.
---------------------
-Python    2.4   up   and   running.   I've   tested   pyExcelerator   under
-Win32  (Python     compiled     with    MS    C    compiler    and    Intel
-C  compiler),    Win64-x86  (MS       C      compiler),   FreeBSD/i386 (GCC
-3.4.2),   FreeBSD/amd64   (GCC    3.4.2).    Fastest    was   Python  under
-FreeBSD/amd64.
-
-
-0x0003. Installation.
---------------------
-As usually: python ./setup.py install
-
-
-0x0004. Documentation.
---------------------
-In progress. At the present time you can use examples and sources (I hope
-I commented sources well and gave variables good names).
-
-
-0x0005. Extra features.
---------------------
-See  ./tools/*.py.  You'll  find  there  BIFF8  dumper  and MS Compound doc
-dumper.  In  ./hrc  you  can take my python.hrc for Colorer plug-in for FAR
-manager.
-
-
-0x0006. Reporting bugs.
---------------------
-Please! 
-
-
-0x0008. Future.
---------------------
-Support for Esher layer and (maybe) charts.
-
-
-0x0009. Useful links.
---------------------
-http://www.python.org    --
-                           Python's home.
-http://sf.net/pyXLWriter -- 
-                           port of the first version Spreadsheet-WriteExcel.
-                           This library can write only BIFF5/7 spreadsheets
-                           and therefore can't use UNICODE in spreadsheets.
-                           pyXLWriter however can write formulas with help
-                           of PLY. IMHO, PLY and ambiguous grammar used by
-                           author for formulas support are too power tools.
-                           But in this case power was equals to simplicity.
-                           I want overcome these restrictions and (strictly
-                           IMHO) misfeatures. 
-http://www.openoffice.org --
-                           OpenOffice home. 
-                           About 650 Mb sources -- the best teachers.
-
-0x000A. Legality.
---------------------
-With  help  from  lawyers  pyExcelerator is protect by Russian Federation's
-laws  and  international  treaties and can be used iff you agreed following
-BSD-like agreement.
-
- Copyright (C) 2005 Roman V. Kiseliov
- All rights reserved.
- 
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions
- are met:
- 
- 1. Redistributions of source code must retain the above copyright
-    notice, this list of conditions and the following disclaimer.
- 
- 2. Redistributions in binary form must reproduce the above copyright
-    notice, this list of conditions and the following disclaimer in
-    the documentation and/or other materials provided with the
-    distribution.
- 
- 3. All advertising materials mentioning features or use of this
-    software must display the following acknowledgment:
-    "This product includes software developed by
-     Roman V. Kiseliov <roman@kiseliov.ru>."
- 
- 4. Redistributions of any form whatsoever must retain the following
-    acknowledgment:
-    "This product includes software developed by
-     Roman V. Kiseliov <roman@kiseliov.ru>."
- 
- THIS SOFTWARE IS PROVIDED BY Roman V. Kiseliov ``AS IS'' AND ANY
- EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL Roman V. Kiseliov OR
- ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-
-0xFFFF. Contacting author.
---------------------
-Feel free to send me feedback and bug reports.
-
-Roman V. Kiseliov
-Russia
-Kursk
-Libknecht St., 4
-
-+7(0712)56-09-83
-
-<roman@kiseliov.ru>
-subject *must* be 
-"pyExcelerator-bug" (without quotes)
-or 
-"pyExcelerator-feedback" (without quotes)
-

config/softs/pyExcelerator-0.6.3a.patched/THANKS.txt

@@ -1,25 +0,0 @@
-* My lovely wife Olya
---------------------------
-* Evgeny Filatov 
-* John McNamara 
-* Daniel Rentz
-* John Machin
-* Ksenia Marasanova
-* Choe, Cheng-Dae
-* Jan ONDREJ
-* Andy Gimblett
-* Blais, Gerard C.
-* McNevin Michael B.
-* John Fouby
-* <your name>. Feel free to update my memory!
---------------------------
-* Offspring
-* Lynkin Park
---------------------------
-* Nescafe
---------------------------
-* Python Team
-* FreeBSD Team
-* SF Team
-
-

config/softs/pyExcelerator-0.6.3a.patched/TODO.txt

@@ -1,2 +0,0 @@
-*Write documentation
-*BSE container for Esher layer

config/softs/pyExcelerator-0.6.3a.patched/examples/CVS/Entries

@@ -1,32 +0,0 @@
-/big-16Mb.py/1.3/Sun Mar 27 12:47:06 2005//
-/big-35Mb.py/1.3/Sun Mar 27 12:47:06 2005//
-/blanks.py/1.2/Fri Jul 22 08:22:26 2005//
-/col_width.py/1.3/Sun Mar 27 12:47:06 2005//
-/format.py/1.3/Sun Mar 27 12:47:06 2005//
-/image.py/1.3/Sun Mar 27 12:47:06 2005//
-/merged.py/1.3/Sun Mar 27 12:47:06 2005//
-/merged0.py/1.3/Sun Mar 27 12:47:06 2005//
-/merged1.py/1.1/Fri Jul 22 08:22:26 2005//
-/mini.py/1.3/Sun Mar 27 12:47:06 2005//
-/outline.py/1.3/Sun Mar 27 12:47:06 2005//
-/row_styles.py/1.3/Sun Mar 27 12:47:06 2005//
-/row_styles_empty.py/1.3/Sun Mar 27 12:47:06 2005//
-/sst.py/1.2/Fri Mar 25 07:31:12 2005//
-/unicode0.py/1.1/Sun Mar 27 12:47:06 2005//
-/unicode1.py/1.1/Sun Mar 27 12:47:06 2005//
-/unicode2.py/1.1/Sun Mar 27 12:47:06 2005//
-/wsprops.py/1.3/Sun Mar 27 12:47:06 2005//
-/xls2csv.py/1.1/Thu May 19 09:27:42 2005//
-/xls2html.py/1.1/Thu May 19 09:27:42 2005//
-/xls2txt.py/1.3/Thu May 19 09:27:42 2005//
-/python.bmp/1.1/Tue Jul 19 18:58:44 2005/-kb/
-/formula_names.py/1.1/Thu Aug 11 08:53:48 2005//
-/parse-fmla.py/1.1/Wed Aug 10 21:08:02 2005//
-/dates.py/1.1/Wed Jul 20 07:24:10 2005//
-/num_formats.py/1.1/Wed Jul 20 07:24:10 2005//
-/numbers.py/1.1/Wed Jul 20 07:24:10 2005//
-/formulas.py/1.4/Wed Oct 26 07:44:24 2005//
-/hyperlinks.py/1.1/Wed Oct 26 07:44:24 2005//
-/panes.py/1.1/Wed Oct 26 07:44:24 2005//
-/protection.py/1.1/Wed Oct 26 07:44:24 2005//
-D

config/softs/pyExcelerator-0.6.3a.patched/examples/CVS/Entries.Extra

@@ -1,31 +0,0 @@
-/big-16Mb.py////*///
-/big-35Mb.py////*///
-/blanks.py////*///
-/col_width.py////*///
-/format.py////*///
-/image.py////*///
-/merged.py////*///
-/merged0.py////*///
-/merged1.py////*///
-/mini.py////*///
-/outline.py////*///
-/row_styles.py////*///
-/row_styles_empty.py////*///
-/sst.py////*///
-/unicode0.py////*///
-/unicode1.py////*///
-/unicode2.py////*///
-/wsprops.py////*///
-/xls2csv.py////*///
-/xls2html.py////*///
-/xls2txt.py////*///
-/python.bmp////*///
-/formula_names.py////*///
-/parse-fmla.py////*///
-/dates.py////*///
-/num_formats.py////*///
-/numbers.py////*///
-/formulas.py////*///
-/hyperlinks.py////*///
-/panes.py////*///
-/protection.py////*///

config/softs/pyExcelerator-0.6.3a.patched/examples/CVS/Entries.Extra.Old

@@ -1,31 +0,0 @@
-/big-16Mb.py////*///
-/big-35Mb.py////*///
-/blanks.py////*///
-/col_width.py////*///
-/format.py////*///
-/image.py////*///
-/merged.py////*///
-/merged0.py////*///
-/merged1.py////*///
-/mini.py////*///
-/outline.py////*///
-/row_styles.py////*///
-/row_styles_empty.py////*///
-/sst.py////*///
-/unicode0.py////*///
-/unicode1.py////*///
-/unicode2.py////*///
-/wsprops.py////*///
-/xls2csv.py////*///
-/xls2html.py////*///
-/xls2txt.py////*///
-/python.bmp////*///
-/formula_names.py////*///
-/parse-fmla.py////*///
-/dates.py////*///
-/formulas.py////*///
-/num_formats.py////*///
-/numbers.py////*///
-/hyperlinks.py////*///
-/panes.py////*///
-/protection.py////*///

config/softs/pyExcelerator-0.6.3a.patched/examples/CVS/Entries.Old

@@ -1,32 +0,0 @@
-/big-16Mb.py/1.3/Sun Mar 27 12:47:06 2005//
-/big-35Mb.py/1.3/Sun Mar 27 12:47:06 2005//
-/blanks.py/1.2/Fri Jul 22 08:22:26 2005//
-/col_width.py/1.3/Sun Mar 27 12:47:06 2005//
-/format.py/1.3/Sun Mar 27 12:47:06 2005//
-/image.py/1.3/Sun Mar 27 12:47:06 2005//
-/merged.py/1.3/Sun Mar 27 12:47:06 2005//
-/merged0.py/1.3/Sun Mar 27 12:47:06 2005//
-/merged1.py/1.1/Fri Jul 22 08:22:26 2005//
-/mini.py/1.3/Sun Mar 27 12:47:06 2005//
-/outline.py/1.3/Sun Mar 27 12:47:06 2005//
-/row_styles.py/1.3/Sun Mar 27 12:47:06 2005//
-/row_styles_empty.py/1.3/Sun Mar 27 12:47:06 2005//
-/sst.py/1.2/Fri Mar 25 07:31:12 2005//
-/unicode0.py/1.1/Sun Mar 27 12:47:06 2005//
-/unicode1.py/1.1/Sun Mar 27 12:47:06 2005//
-/unicode2.py/1.1/Sun Mar 27 12:47:06 2005//
-/wsprops.py/1.3/Sun Mar 27 12:47:06 2005//
-/xls2csv.py/1.1/Thu May 19 09:27:42 2005//
-/xls2html.py/1.1/Thu May 19 09:27:42 2005//
-/xls2txt.py/1.3/Thu May 19 09:27:42 2005//
-/python.bmp/1.1/Tue Jul 19 18:58:44 2005/-kb/
-/formula_names.py/1.1/Thu Aug 11 08:53:48 2005//
-/parse-fmla.py/1.1/Wed Aug 10 21:08:02 2005//
-/dates.py/1.1/Wed Jul 20 07:24:10 2005//
-/formulas.py/1.3/Sun Aug 14 06:40:22 2005//
-/num_formats.py/1.1/Wed Jul 20 07:24:10 2005//
-/numbers.py/1.1/Wed Jul 20 07:24:10 2005//
-/hyperlinks.py/0/dummy timestamp//
-/panes.py/0/dummy timestamp//
-/protection.py/0/dummy timestamp//
-D

config/softs/pyExcelerator-0.6.3a.patched/examples/CVS/Repository

@@ -1 +0,0 @@
-pyExcelerator/examples

config/softs/pyExcelerator-0.6.3a.patched/examples/CVS/Root

@@ -1 +0,0 @@
-:ext:rvk@cvs.sf.net:/cvsroot/pyexcelerator

config/softs/pyExcelerator-0.6.3a.patched/examples/big-16Mb.py

@@ -1,37 +0,0 @@
-#!/usr/bin/env python
-# tries stress SST, SAT and MSAT
-__rev_id__ = """$Id: big-16Mb.py,v 1.3 2005/03/27 12:47:06 rvk Exp $"""
-
-
-from time import *
-from pyExcelerator.Workbook import *
-from pyExcelerator.Style import *
-
-style = XFStyle()
-
-wb = Workbook()
-ws0 = wb.add_sheet('0')
-
-colcount = 200 + 1
-rowcount = 6000 + 1
-
-t0 = time()
-print "\nstart: %s" % ctime(t0)
-
-print "Filling..."
-for col in xrange(colcount):
-    print "[%d]" % col, 
-    for row in xrange(rowcount):
-        #ws0.write(row, col, "BIG(%d, %d)" % (row, col))
-        ws0.write(row, col, "BIG")
-
-t1 = time() - t0
-print "\nsince starting elapsed %.2f s" % (t1)
-
-print "Storing..."
-wb.save('big-16Mb.xls')
-
-t2 = time() - t0
-print "since starting elapsed %.2f s" % (t2)
-
-

config/softs/pyExcelerator-0.6.3a.patched/examples/big-35Mb.py

@@ -1,36 +0,0 @@
-#!/usr/bin/env python
-# tries stress SST, SAT and MSAT
-__rev_id__ = """$Id: big-35Mb.py,v 1.3 2005/03/27 12:47:06 rvk Exp $"""
-
-
-from time import *
-from pyExcelerator import *
-
-style = XFStyle()
-
-wb = Workbook()
-ws0 = wb.add_sheet('0')
-
-colcount = 200 + 1
-rowcount = 6000 + 1
-
-t0 = time()
-print "\nstart: %s" % ctime(t0)
-
-print "Filling..."
-for col in xrange(colcount):
-    print "[%d]" % col, 
-    for row in xrange(rowcount):
-        ws0.write(row, col, "BIG(%d, %d)" % (row, col))
-        #ws0.write(row, col, "BIG")
-
-t1 = time() - t0
-print "\nsince starting elapsed %.2f s" % (t1)
-
-print "Storing..."
-wb.save('big-35Mb.xls')
-
-t2 = time() - t0
-print "since starting elapsed %.2f s" % (t2)
-
-

config/softs/pyExcelerator-0.6.3a.patched/examples/blanks.py

@@ -1,39 +0,0 @@
-#!/usr/bin/env python
-# -*- coding: windows-1251 -*-
-# Copyright (C) 2005 Kiseliov Roman
-
-__rev_id__ = """$Id: blanks.py,v 1.2 2005/07/22 08:22:26 rvk Exp $"""
-
-
-from pyExcelerator import *
-
-font0 = Font()
-font0.name = 'Times New Roman'
-font0.struck_out = True
-font0.bold = True
-
-style0 = XFStyle()
-style0.font = font0
-
-
-wb = Workbook()
-ws0 = wb.add_sheet('0')
-
-ws0.write(1, 1, 'Test', style0)
-
-for i in range(0, 0x53):
-    borders = Borders()
-    borders.left = i
-    borders.right = i
-    borders.top = i
-    borders.bottom = i
-
-    style = XFStyle()
-    style.borders = borders
-
-    ws0.write(i, 2, '', style)
-    ws0.write(i, 3, hex(i), style0)
-
-ws0.write_merge(5, 8, 6, 10, "")
-
-wb.save('blanks.xls')

config/softs/pyExcelerator-0.6.3a.patched/examples/col_width.py

@@ -1,19 +0,0 @@
-#!/usr/bin/env python
-# -*- coding: windows-1251 -*-
-# Copyright (C) 2005 Kiseliov Roman
-__rev_id__ = """$Id: col_width.py,v 1.3 2005/03/27 12:47:06 rvk Exp $"""
-
-
-from pyExcelerator import *
-
-w = Workbook()
-ws = w.add_sheet('Hey, Dude')
-
-for i in range(6, 80):
-    fnt = Font()
-    fnt.height = i*20
-    style = XFStyle()
-    style.font = fnt
-    ws.write(1, i, 'Test')
-    ws.col(i).width = 0x0d00 + i
-w.save('col_width.xls')

config/softs/pyExcelerator-0.6.3a.patched/examples/dates.py

@@ -1,39 +0,0 @@
-#!/usr/bin/env python
-# -*- coding: windows-1251 -*-
-# Copyright (C) 2005 Kiseliov Roman
-__rev_id__ = """$Id: dates.py,v 1.1 2005/07/20 07:24:11 rvk Exp $"""
-
-
-from pyExcelerator import *
-from datetime import datetime
-
-w = Workbook()
-ws = w.add_sheet('Hey, Dude')
-
-fmts = [
-    'M/D/YY',
-    'D-MMM-YY',
-    'D-MMM',
-    'MMM-YY',
-    'h:mm AM/PM',
-    'h:mm:ss AM/PM',
-    'h:mm',
-    'h:mm:ss',
-    'M/D/YY h:mm',
-    'mm:ss',
-    '[h]:mm:ss',
-    'mm:ss.0',
-]
-
-i = 0
-for fmt in fmts:
-    ws.write(i, 0, fmt)
-
-    style = XFStyle()
-    style.num_format_str = fmt
-
-    ws.write(i, 4, datetime.now(), style)
-
-    i += 1
-
-w.save('dates.xls')

config/softs/pyExcelerator-0.6.3a.patched/examples/format.py

@@ -1,41 +0,0 @@
-#!/usr/bin/env python
-# -*- coding: windows-1251 -*-
-# Copyright (C) 2005 Kiseliov Roman
-
-__rev_id__ = """$Id: format.py,v 1.3 2005/03/27 12:47:06 rvk Exp $"""
-
-
-from pyExcelerator import *
-
-font0 = Font()
-font0.name = 'Times New Roman'
-font0.struck_out = True
-font0.bold = True
-
-style0 = XFStyle()
-style0.font = font0
-
-
-wb = Workbook()
-ws0 = wb.add_sheet('0')
-
-ws0.write(1, 1, 'Test', style0)
-
-for i in range(0, 0x53):
-    fnt = Font()
-    fnt.name = 'Arial'
-    fnt.colour_index = i
-    fnt.outline = True
-
-    borders = Borders()
-    borders.left = i
-
-    style = XFStyle()
-    style.font = fnt
-    style.borders = borders
-
-    ws0.write(i, 2, 'colour', style)
-    ws0.write(i, 3, hex(i), style0)
-
-
-wb.save('format.xls')

config/softs/pyExcelerator-0.6.3a.patched/examples/formula_names.py

@@ -1,18 +0,0 @@
-#!/usr/bin/env python
-# -*- coding: windows-1251 -*-
-# Copyright (C) 2005 Kiseliov Roman
-__rev_id__ = """$Id: formula_names.py,v 1.1 2005/08/11 08:53:48 rvk Exp $"""
-
-
-from pyExcelerator import *
-
-w = Workbook()
-ws = w.add_sheet('F')
-
-i = 0
-for n in sorted(ExcelMagic.std_func_by_name):
-    ws.write(i, 0, n)
-    ws.write(i, 3, Formula(n + "($A$1)"))
-    i += 1
-
-w.save('formula_names.xls')

config/softs/pyExcelerator-0.6.3a.patched/examples/formulas.py

@@ -1,49 +0,0 @@
-#!/usr/bin/env python
-# -*- coding: windows-1251 -*-
-# Copyright (C) 2005 Kiseliov Roman
-__rev_id__ = """$Id: formulas.py,v 1.4 2005/10/26 07:44:24 rvk Exp $"""
-
-
-from pyExcelerator import *
-
-w = Workbook()
-ws = w.add_sheet('F')
-
-ws.write(0, 0, Formula("-(1+1)"))
-ws.write(1, 0, Formula("-(1+1)/(-2-2)"))
-ws.write(2, 0, Formula("-(134.8780789+1)"))
-ws.write(3, 0, Formula("-(134.8780789e-10+1)"))
-ws.write(4, 0, Formula("-1/(1+1)+9344"))
-
-ws.write(0, 1, Formula("-(1+1)"))
-ws.write(1, 1, Formula("-(1+1)/(-2-2)"))
-ws.write(2, 1, Formula("-(134.8780789+1)"))
-ws.write(3, 1, Formula("-(134.8780789e-10+1)"))
-ws.write(4, 1, Formula("-1/(1+1)+9344"))
-
-ws.write(0, 2, Formula("A1*B1"))
-ws.write(1, 2, Formula("A2*B2"))
-ws.write(2, 2, Formula("A3*B3"))
-ws.write(3, 2, Formula("A4*B4*sin(pi()/4)"))
-ws.write(4, 2, Formula("A5%*B5*pi()/1000"))
-
-##############
-## NOTE: parameters are separated by semicolon!!!
-##############
-
-
-ws.write(5, 2, Formula("C1+C2+C3+C4+C5/(C1+C2+C3+C4/(C1+C2+C3+C4/(C1+C2+C3+C4)+C5)+C5)-20.3e-2"))
-ws.write(5, 3, Formula("C1^2"))
-ws.write(6, 2, Formula("SUM(C1;C2;;;;;C3;;;C4)"))
-ws.write(6, 3, Formula("SUM($A$1:$C$5)"))
-
-ws.write(7, 0, Formula('"lkjljllkllkl"'))
-ws.write(7, 1, Formula('"yuyiyiyiyi"'))
-ws.write(7, 2, Formula('A8 & B8 & A8'))
-ws.write(8, 2, Formula('now()'))
-
-ws.write(10, 2, Formula('TRUE'))
-ws.write(11, 2, Formula('FALSE'))
-ws.write(12, 3, Formula('IF(A1>A2;3;"hkjhjkhk")'))
-
-w.save('formulas.xls')

config/softs/pyExcelerator-0.6.3a.patched/examples/hyperlinks.py

@@ -1,30 +0,0 @@
-#!/usr/bin/env python
-# -*- coding: windows-1251 -*-
-# Copyright (C) 2005 Kiseliov Roman
-__rev_id__ = """$Id: hyperlinks.py,v 1.1 2005/10/26 07:44:24 rvk Exp $"""
-
-
-from pyExcelerator import *
-
-f = Font()
-f.height = 20*72
-f.name = 'Verdana'
-f.bold = True
-f.underline = Font.UNDERLINE_DOUBLE
-f.colour_index = 4
-
-h_style = XFStyle()
-h_style.font = f
-
-w = Workbook()
-ws = w.add_sheet('F')
-
-##############
-## NOTE: parameters are separated by semicolon!!!
-##############
-
-n = "HYPERLINK"
-ws.write_merge(1, 1, 1, 10, Formula(n + '("http://www.irs.gov/pub/irs-pdf/f1000.pdf";"f1000.pdf")'), h_style)
-ws.write_merge(2, 2, 2, 25, Formula(n + '("mailto:roman.kiseliov@gmail.com?subject=pyExcelerator-feedback&Body=Hello,%20Roman!";"pyExcelerator-feedback")'), h_style)
-
-w.save("hyperlinks.xls")

config/softs/pyExcelerator-0.6.3a.patched/examples/image.py

@@ -1,15 +0,0 @@
-#!/usr/bin/env python
-# -*- coding: windows-1251 -*-
-# Copyright (C) 2005 Kiseliov Roman
-
-__rev_id__ = """$Id: image.py,v 1.3 2005/03/27 12:47:06 rvk Exp $"""
-
-
-from pyExcelerator import *
-
-w = Workbook()
-ws = w.add_sheet('Image')
-ws.insert_bitmap('python.bmp', 2, 2)
-ws.insert_bitmap('python.bmp', 10, 2)
-
-w.save('image.xls')

config/softs/pyExcelerator-0.6.3a.patched/examples/merged.py

@@ -1,42 +0,0 @@
-#!/usr/bin/env python
-# -*- coding: windows-1251 -*-
-# Copyright (C) 2005 Kiseliov Roman
-
-__rev_id__ = """$Id: merged.py,v 1.3 2005/03/27 12:47:06 rvk Exp $"""
-
-
-from pyExcelerator import *
-
-fnt = Font()
-fnt.name = 'Arial'
-fnt.colour_index = 4
-fnt.bold = True
-
-borders = Borders()
-borders.left = 6
-borders.right = 6
-borders.top = 6
-borders.bottom = 6
-
-al = Alignment()
-al.horz = Alignment.HORZ_CENTER
-al.vert = Alignment.VERT_CENTER
-
-style = XFStyle()
-style.font = fnt
-style.borders = borders
-style.alignment = al
-
-
-wb = Workbook()
-ws0 = wb.add_sheet('sheet0')
-ws1 = wb.add_sheet('sheet1')
-ws2 = wb.add_sheet('sheet2')
-
-for i in range(0, 0x200, 2):
-    ws0.write_merge(i, i+1, 1, 5, 'test %d' % i, style)
-    ws1.write_merge(i, i, 1, 7, 'test %d' % i, style)
-    ws2.write_merge(i, i+1, 1, 7 + (i%10), 'test %d' % i, style)
-
-
-wb.save('merged.xls')

config/softs/pyExcelerator-0.6.3a.patched/examples/merged0.py

@@ -1,32 +0,0 @@
-#!/usr/bin/env python
-# -*- coding: windows-1251 -*-
-# Copyright (C) 2005 Kiseliov Roman
-__rev_id__ = """$Id: merged0.py,v 1.3 2005/03/27 12:47:06 rvk Exp $"""
-
-
-from pyExcelerator import *
-
-wb = Workbook()
-ws0 = wb.add_sheet('sheet0')
-
-
-fnt = Font()
-fnt.name = 'Arial'
-fnt.colour_index = 4
-fnt.bold = True
-
-borders = Borders()
-borders.left = 6
-borders.right = 6
-borders.top = 6
-borders.bottom = 6
-
-style = XFStyle()
-style.font = fnt
-style.borders = borders
-
-ws0.write_merge(3, 3, 1, 5, 'test1', style)
-ws0.write_merge(4, 10, 1, 5, 'test2', style)
-ws0.col(1).width = 0x0d00
-
-wb.save('merged0.xls')

config/softs/pyExcelerator-0.6.3a.patched/examples/merged1.py

@@ -1,104 +0,0 @@
-#!/usr/bin/env python
-# -*- coding: windows-1251 -*-
-# Copyright (C) 2005 Kiseliov Roman
-__rev_id__ = """$Id: merged1.py,v 1.1 2005/07/22 08:22:26 rvk Exp $"""
-
-
-from pyExcelerator import *
-
-wb = Workbook()
-ws0 = wb.add_sheet('sheet0')
-
-fnt1 = Font()
-fnt1.name = 'Verdana'
-fnt1.bold = True
-fnt1.height = 18*0x14
-
-pat1 = Pattern()
-pat1.pattern = Pattern.SOLID_PATTERN
-pat1.pattern_fore_colour = 0x16
-
-brd1 = Borders()
-brd1.left = 0x06
-brd1.right = 0x06
-brd1.top = 0x06
-brd1.bottom = 0x06
-
-fnt2 = Font()
-fnt2.name = 'Verdana'
-fnt2.bold = True
-fnt2.height = 14*0x14
-
-brd2 = Borders()
-brd2.left = 0x01
-brd2.right = 0x01
-brd2.top = 0x01
-brd2.bottom = 0x01
-
-pat2 = Pattern()
-pat2.pattern = Pattern.SOLID_PATTERN
-pat2.pattern_fore_colour = 0x01F
-
-fnt3 = Font()
-fnt3.name = 'Verdana'
-fnt3.bold = True
-fnt3.italic = True
-fnt3.height = 12*0x14
-
-brd3 = Borders()
-brd3.left = 0x07
-brd3.right = 0x07
-brd3.top = 0x07
-brd3.bottom = 0x07
-
-fnt4 = Font()
-
-al1 = Alignment()
-al1.horz = Alignment.HORZ_CENTER
-al1.vert = Alignment.VERT_CENTER
-
-al2 = Alignment()
-al2.horz = Alignment.HORZ_RIGHT
-al2.vert = Alignment.VERT_CENTER
-
-al3 = Alignment()
-al3.horz = Alignment.HORZ_LEFT
-al3.vert = Alignment.VERT_CENTER
-
-style1 = XFStyle()
-style1.font = fnt1
-style1.alignment = al1
-style1.pattern = pat1
-style1.borders = brd1
-
-style2 = XFStyle()
-style2.font = fnt2
-style2.alignment = al1
-style2.pattern = pat2
-style2.borders = brd2
-
-style3 = XFStyle()
-style3.font = fnt3
-style3.alignment = al1
-style3.pattern = pat2
-style3.borders = brd3
-
-price_style = XFStyle()
-price_style.font = fnt4
-price_style.alignment = al2
-price_style.borders = brd3
-price_style.num_format_str = '_(#,##0.00_) "money"'
-
-ware_style = XFStyle()
-ware_style.font = fnt4
-ware_style.alignment = al3
-ware_style.borders = brd3
-
-
-ws0.merge(3, 3, 1, 5, style1)
-ws0.merge(4, 10, 1, 6, style2)
-ws0.merge(14, 16, 1, 7, style3)
-ws0.col(1).width = 0x0d00
-
-
-wb.save('merged1.xls')

config/softs/pyExcelerator-0.6.3a.patched/examples/mini.py

@@ -1,11 +0,0 @@
-#!/usr/bin/env python
-# -*- coding: windows-1251 -*-
-# Copyright (C) 2005 Kiseliov Roman
-__rev_id__ = """$Id: mini.py,v 1.3 2005/03/27 12:47:06 rvk Exp $"""
-
-
-from pyExcelerator import *
-
-w = Workbook()
-ws = w.add_sheet('Hey, Dude')
-w.save('mini.xls')

config/softs/pyExcelerator-0.6.3a.patched/examples/num_formats.py

@@ -1,62 +0,0 @@
-#!/usr/bin/env python
-# -*- coding: windows-1251 -*-
-# Copyright (C) 2005 Kiseliov Roman
-__rev_id__ = """$Id: num_formats.py,v 1.1 2005/07/20 07:24:11 rvk Exp $"""
-
-
-from pyExcelerator import *
-
-w = Workbook()
-ws = w.add_sheet('Hey, Dude')
-
-fmts = [
-    'general',
-    '0',
-    '0.00',
-    '#,##0',
-    '#,##0.00',
-    '"$"#,##0_);("$"#,##',
-    '"$"#,##0_);[Red]("$"#,##',
-    '"$"#,##0.00_);("$"#,##',
-    '"$"#,##0.00_);[Red]("$"#,##',
-    '0%',
-    '0.00%',
-    '0.00E+00',
-    '# ?/?',
-    '# ??/??',
-    'M/D/YY',
-    'D-MMM-YY',
-    'D-MMM',
-    'MMM-YY',
-    'h:mm AM/PM',
-    'h:mm:ss AM/PM',
-    'h:mm',
-    'h:mm:ss',
-    'M/D/YY h:mm',
-    '_(#,##0_);(#,##0)',
-    '_(#,##0_);[Red](#,##0)',
-    '_(#,##0.00_);(#,##0.00)',
-    '_(#,##0.00_);[Red](#,##0.00)',
-    '_("$"* #,##0_);_("$"* (#,##0);_("$"* "-"_);_(@_)',
-    '_(* #,##0_);_(* (#,##0);_(* "-"_);_(@_)',
-    '_("$"* #,##0.00_);_("$"* (#,##0.00);_("$"* "-"??_);_(@_)',
-    '_(* #,##0.00_);_(* (#,##0.00);_(* "-"??_);_(@_)',
-    'mm:ss',
-    '[h]:mm:ss',
-    'mm:ss.0',
-    '##0.0E+0',
-    '@'   
-]
-
-i = 0
-for fmt in fmts:
-    ws.write(i, 0, fmt)
-
-    style = XFStyle()
-    style.num_format_str = fmt
-
-    ws.write(i, 4, -1278.9078, style)
-
-    i += 1
-
-w.save('num_formats.xls')

config/softs/pyExcelerator-0.6.3a.patched/examples/numbers.py

@@ -1,27 +0,0 @@
-#!/usr/bin/env python
-# -*- coding: windows-1251 -*-
-# Copyright (C) 2005 Kiseliov Roman
-__rev_id__ = """$Id: numbers.py,v 1.1 2005/07/20 07:24:11 rvk Exp $"""
-
-
-from pyExcelerator import *
-
-w = Workbook()
-ws = w.add_sheet('Hey, Dude')
-
-ws.write(0, 0, 1)
-ws.write(1, 0, 1.23)
-ws.write(2, 0, 12345678)
-ws.write(3, 0, 123456.78)
-
-ws.write(0, 1, -1)
-ws.write(1, 1, -1.23)
-ws.write(2, 1, -12345678)
-ws.write(3, 1, -123456.78)
-
-ws.write(0, 2, -17867868678687.0)
-ws.write(1, 2, -1.23e-5)
-ws.write(2, 2, -12345678.90780980)
-ws.write(3, 2, -123456.78)
-
-w.save('numbers.xls')

config/softs/pyExcelerator-0.6.3a.patched/examples/outline.py

@@ -1,115 +0,0 @@
-#!/usr/bin/env python
-# -*- coding: windows-1251 -*-
-# Copyright (C) 2005 Kiseliov Roman
-__rev_id__ = """$Id: outline.py,v 1.3 2005/03/27 12:47:06 rvk Exp $"""
-
-
-from pyExcelerator import *
-
-fnt = Font()
-fnt.name = 'Arial'
-fnt.colour_index = 4
-fnt.bold = True
-
-borders = Borders()
-borders.left = 6
-borders.right = 6
-borders.top = 6
-borders.bottom = 6
-
-style = XFStyle()
-style.font = fnt
-style.borders = borders
-
-wb = Workbook()
-
-ws0 = wb.add_sheet('Rows Outline')
-
-ws0.write_merge(1, 1, 1, 5, 'test 1', style)
-ws0.write_merge(2, 2, 1, 4, 'test 1', style)
-ws0.write_merge(3, 3, 1, 3, 'test 2', style)
-ws0.write_merge(4, 4, 1, 4, 'test 1', style)
-ws0.write_merge(5, 5, 1, 4, 'test 3', style)
-ws0.write_merge(6, 6, 1, 5, 'test 1', style)
-ws0.write_merge(7, 7, 1, 5, 'test 4', style)
-ws0.write_merge(8, 8, 1, 4, 'test 1', style)
-ws0.write_merge(9, 9, 1, 3, 'test 5', style)
-
-ws0.row(1).level = 1
-ws0.row(2).level = 1
-ws0.row(3).level = 2
-ws0.row(4).level = 2
-ws0.row(5).level = 2
-ws0.row(6).level = 2
-ws0.row(7).level = 2
-ws0.row(8).level = 1
-ws0.row(9).level = 1
-
-
-ws1 = wb.add_sheet('Columns Outline')
-
-ws1.write_merge(1, 1, 1, 5, 'test 1', style)
-ws1.write_merge(2, 2, 1, 4, 'test 1', style)
-ws1.write_merge(3, 3, 1, 3, 'test 2', style)
-ws1.write_merge(4, 4, 1, 4, 'test 1', style)
-ws1.write_merge(5, 5, 1, 4, 'test 3', style)
-ws1.write_merge(6, 6, 1, 5, 'test 1', style)
-ws1.write_merge(7, 7, 1, 5, 'test 4', style)
-ws1.write_merge(8, 8, 1, 4, 'test 1', style)
-ws1.write_merge(9, 9, 1, 3, 'test 5', style)
-
-ws1.col(1).level = 1
-ws1.col(2).level = 1
-ws1.col(3).level = 2
-ws1.col(4).level = 2
-ws1.col(5).level = 2
-ws1.col(6).level = 2
-ws1.col(7).level = 2
-ws1.col(8).level = 1
-ws1.col(9).level = 1
-
-
-ws2 = wb.add_sheet('Rows and Columns Outline')
-
-ws2.write_merge(1, 1, 1, 5, 'test 1', style)
-ws2.write_merge(2, 2, 1, 4, 'test 1', style)
-ws2.write_merge(3, 3, 1, 3, 'test 2', style)
-ws2.write_merge(4, 4, 1, 4, 'test 1', style)
-ws2.write_merge(5, 5, 1, 4, 'test 3', style)
-ws2.write_merge(6, 6, 1, 5, 'test 1', style)
-ws2.write_merge(7, 7, 1, 5, 'test 4', style)
-ws2.write_merge(8, 8, 1, 4, 'test 1', style)
-ws2.write_merge(9, 9, 1, 3, 'test 5', style)
-
-ws2.row(1).level = 1
-ws2.row(2).level = 1
-ws2.row(3).level = 2
-ws2.row(4).level = 2
-ws2.row(5).level = 2
-ws2.row(6).level = 2
-ws2.row(7).level = 2
-ws2.row(8).level = 1
-ws2.row(9).level = 1
-
-ws2.write_merge(1, 1, 1, 5, 'test 1', style)
-ws2.write_merge(2, 2, 1, 4, 'test 1', style)
-ws2.write_merge(3, 3, 1, 3, 'test 2', style)
-ws2.write_merge(4, 4, 1, 4, 'test 1', style)
-ws2.write_merge(5, 5, 1, 4, 'test 3', style)
-ws2.write_merge(6, 6, 1, 5, 'test 1', style)
-ws2.write_merge(7, 7, 1, 5, 'test 4', style)
-ws2.write_merge(8, 8, 1, 4, 'test 1', style)
-ws2.write_merge(9, 9, 1, 3, 'test 5', style)
-
-ws2.col(1).level = 1
-ws2.col(2).level = 1
-ws2.col(3).level = 2
-ws2.col(4).level = 2
-ws2.col(5).level = 2
-ws2.col(6).level = 2
-ws2.col(7).level = 2
-ws2.col(8).level = 1
-ws2.col(9).level = 1
-
-
-wb.save('outline.xls')

config/softs/pyExcelerator-0.6.3a.patched/examples/panes.py

@@ -1,60 +0,0 @@
-#!/usr/bin/env python
-# -*- coding: windows-1251 -*-
-# Copyright (C) 2005 Kiseliov Roman
-__rev_id__ = """$Id: panes.py,v 1.1 2005/10/26 07:44:24 rvk Exp $"""
-
-
-from pyExcelerator import *
-
-w = Workbook()
-ws1 = w.add_sheet('sheet 1')
-ws2 = w.add_sheet('sheet 2')
-ws3 = w.add_sheet('sheet 3')
-ws4 = w.add_sheet('sheet 4')
-ws5 = w.add_sheet('sheet 5')
-ws6 = w.add_sheet('sheet 6')
-
-for i in range(0x100):
-    ws1.write(i/0x10, i%0x10, i)
-
-for i in range(0x100):
-    ws2.write(i/0x10, i%0x10, i)
-
-for i in range(0x100):
-    ws3.write(i/0x10, i%0x10, i)
-
-for i in range(0x100):
-    ws4.write(i/0x10, i%0x10, i)
-
-for i in range(0x100):
-    ws5.write(i/0x10, i%0x10, i)
-
-for i in range(0x100):
-    ws6.write(i/0x10, i%0x10, i)
-
-ws1.panes_frozen = True
-ws1.horz_split_pos = 2
-
-ws2.panes_frozen = True
-ws2.vert_split_pos = 2
-
-ws3.panes_frozen = True
-ws3.horz_split_pos = 1
-ws3.vert_split_pos = 1
-
-ws4.panes_frozen = False
-ws4.horz_split_pos = 12
-ws4.horz_split_first_visible = 2
-
-ws5.panes_frozen = False
-ws5.vert_split_pos = 40
-ws4.vert_split_first_visible = 2
-
-ws6.panes_frozen = False
-ws6.horz_split_pos = 12
-ws4.horz_split_first_visible = 2
-ws6.vert_split_pos = 40
-ws4.vert_split_first_visible = 2
-
-w.save('panes.xls')
-

config/softs/pyExcelerator-0.6.3a.patched/examples/parse-fmla.py

@@ -1,12 +0,0 @@
-from pyExcelerator import ExcelFormulaParser, ExcelFormula
-import sys
-
-f = ExcelFormula.Formula(
-""" -((1.80 + 2.898 * 1)/(1.80 + 2.898))*
-AVERAGE((1.80 + 2.898 * 1)/(1.80 + 2.898); 
-        (1.80 + 2.898 * 1)/(1.80 + 2.898); 
-        (1.80 + 2.898 * 1)/(1.80 + 2.898)) + 
-SIN(PI()/4)""")
-
-#for t in f.rpn():
-#    print "%15s %15s" % (ExcelFormulaParser.PtgNames[t[0]], t[1])

config/softs/pyExcelerator-0.6.3a.patched/examples/protection.py

@@ -1,136 +0,0 @@
-#!/usr/bin/env python
-# -*- coding: windows-1251 -*-
-# Copyright (C) 2005 Kiseliov Roman
-__rev_id__ = """$Id: protection.py,v 1.1 2005/10/26 07:44:24 rvk Exp $"""
-
-
-from pyExcelerator import *
-
-fnt = Font()
-fnt.name = 'Arial'
-fnt.colour_index = 4
-fnt.bold = True
-
-borders = Borders()
-borders.left = 6
-borders.right = 6
-borders.top = 6
-borders.bottom = 6
-
-style = XFStyle()
-style.font = fnt
-style.borders = borders
-
-wb = Workbook()
-
-ws0 = wb.add_sheet('Rows Outline')
-
-ws0.write_merge(1, 1, 1, 5, 'test 1', style)
-ws0.write_merge(2, 2, 1, 4, 'test 1', style)
-ws0.write_merge(3, 3, 1, 3, 'test 2', style)
-ws0.write_merge(4, 4, 1, 4, 'test 1', style)
-ws0.write_merge(5, 5, 1, 4, 'test 3', style)
-ws0.write_merge(6, 6, 1, 5, 'test 1', style)
-ws0.write_merge(7, 7, 1, 5, 'test 4', style)
-ws0.write_merge(8, 8, 1, 4, 'test 1', style)
-ws0.write_merge(9, 9, 1, 3, 'test 5', style)
-
-ws0.row(1).level = 1
-ws0.row(2).level = 1
-ws0.row(3).level = 2
-ws0.row(4).level = 2
-ws0.row(5).level = 2
-ws0.row(6).level = 2
-ws0.row(7).level = 2
-ws0.row(8).level = 1
-ws0.row(9).level = 1
-
-
-ws1 = wb.add_sheet('Columns Outline')
-
-ws1.write_merge(1, 1, 1, 5, 'test 1', style)
-ws1.write_merge(2, 2, 1, 4, 'test 1', style)
-ws1.write_merge(3, 3, 1, 3, 'test 2', style)
-ws1.write_merge(4, 4, 1, 4, 'test 1', style)
-ws1.write_merge(5, 5, 1, 4, 'test 3', style)
-ws1.write_merge(6, 6, 1, 5, 'test 1', style)
-ws1.write_merge(7, 7, 1, 5, 'test 4', style)
-ws1.write_merge(8, 8, 1, 4, 'test 1', style)
-ws1.write_merge(9, 9, 1, 3, 'test 5', style)
-
-ws1.col(1).level = 1
-ws1.col(2).level = 1
-ws1.col(3).level = 2
-ws1.col(4).level = 2
-ws1.col(5).level = 2
-ws1.col(6).level = 2
-ws1.col(7).level = 2
-ws1.col(8).level = 1
-ws1.col(9).level = 1
-
-
-ws2 = wb.add_sheet('Rows and Columns Outline')
-
-ws2.write_merge(1, 1, 1, 5, 'test 1', style)
-ws2.write_merge(2, 2, 1, 4, 'test 1', style)
-ws2.write_merge(3, 3, 1, 3, 'test 2', style)
-ws2.write_merge(4, 4, 1, 4, 'test 1', style)
-ws2.write_merge(5, 5, 1, 4, 'test 3', style)
-ws2.write_merge(6, 6, 1, 5, 'test 1', style)
-ws2.write_merge(7, 7, 1, 5, 'test 4', style)
-ws2.write_merge(8, 8, 1, 4, 'test 1', style)
-ws2.write_merge(9, 9, 1, 3, 'test 5', style)
-
-ws2.row(1).level = 1
-ws2.row(2).level = 1
-ws2.row(3).level = 2
-ws2.row(4).level = 2
-ws2.row(5).level = 2
-ws2.row(6).level = 2
-ws2.row(7).level = 2
-ws2.row(8).level = 1
-ws2.row(9).level = 1
-
-ws2.write_merge(1, 1, 1, 5, 'test 1', style)
-ws2.write_merge(2, 2, 1, 4, 'test 1', style)
-ws2.write_merge(3, 3, 1, 3, 'test 2', style)
-ws2.write_merge(4, 4, 1, 4, 'test 1', style)
-ws2.write_merge(5, 5, 1, 4, 'test 3', style)
-ws2.write_merge(6, 6, 1, 5, 'test 1', style)
-ws2.write_merge(7, 7, 1, 5, 'test 4', style)
-ws2.write_merge(8, 8, 1, 4, 'test 1', style)
-ws2.write_merge(9, 9, 1, 3, 'test 5', style)
-
-ws2.col(1).level = 1
-ws2.col(2).level = 1
-ws2.col(3).level = 2
-ws2.col(4).level = 2
-ws2.col(5).level = 2
-ws2.col(6).level = 2
-ws2.col(7).level = 2
-ws2.col(8).level = 1
-ws2.col(9).level = 1
-
-
-ws0.protect = True
-ws0.wnd_protect = True
-ws0.obj_protect = True
-ws0.scen_protect = True
-ws0.password = "123456"
-
-ws1.protect = True
-ws1.wnd_protect = True
-ws1.obj_protect = True
-ws1.scen_protect = True
-ws1.password = "abcdefghij"
-
-ws2.protect = True
-ws2.wnd_protect = True
-ws2.obj_protect = True
-ws2.scen_protect = True
-ws2.password = "ok"
-
-wb.protect = True
-wb.wnd_protect = True
-wb.obj_protect = True
-wb.save('protection.xls')

config/softs/pyExcelerator-0.6.3a.patched/examples/row_styles.py

@@ -1,19 +0,0 @@
-#!/usr/bin/env python
-# -*- coding: windows-1251 -*-
-# Copyright (C) 2005 Kiseliov Roman
-__rev_id__ = """$Id: row_styles.py,v 1.3 2005/03/27 12:47:06 rvk Exp $"""
-
-
-from pyExcelerator import *
-
-w = Workbook()
-ws = w.add_sheet('Hey, Dude')
-
-for i in range(6, 80):
-    fnt = Font()
-    fnt.height = i*20
-    style = XFStyle()
-    style.font = fnt
-    ws.write(i, 1, 'Test')
-    ws.row(i).set_style(style)
-w.save('row_styles.xls')

config/softs/pyExcelerator-0.6.3a.patched/examples/row_styles_empty.py

@@ -1,18 +0,0 @@
-#!/usr/bin/env python
-# -*- coding: windows-1251 -*-
-# Copyright (C) 2005 Kiseliov Roman
-__rev_id__ = """$Id: row_styles_empty.py,v 1.3 2005/03/27 12:47:06 rvk Exp $"""
-
-
-from pyExcelerator import *
-
-w = Workbook()
-ws = w.add_sheet('Hey, Dude')
-
-for i in range(6, 80):
-    fnt = Font()
-    fnt.height = i*20
-    style = XFStyle()
-    style.font = fnt
-    ws.row(i).set_style(style)
-w.save('row_styles_empty.xls')

config/softs/pyExcelerator-0.6.3a.patched/examples/sst.py

@@ -1,54 +0,0 @@
-#!/usr/bin/env python
-# -*- coding: windows-1251 -*-
-# Copyright (C) 2005 Kiseliov Roman
-__rev_id__ = """$Id: sst.py,v 1.2 2005/03/25 07:31:12 rvk Exp $"""
-
-
-from pyExcelerator import *
-
-font0 = Formatting.Font()
-font0.name = 'Arial'
-font1 = Formatting.Font()
-font1.name = 'Arial Cyr'
-font2 = Formatting.Font()
-font2.name = 'Times New Roman'
-font3 = Formatting.Font()
-font3.name = 'Courier New Cyr'
-
-num_format0 = '0.00000'
-num_format1 = '0.000000'
-num_format2 = '0.0000000'
-num_format3 = '0.00000000'
-
-st0 = XFStyle()
-st1 = XFStyle()
-st2 = XFStyle()
-st3 = XFStyle()
-st4 = XFStyle()
-
-st0.font = font0
-st0.num_format = num_format0
-
-st1.font = font1
-st1.num_format = num_format1
-
-st2.font = font2
-st2.num_format = num_format2
-
-st3.font = font3
-st3.num_format = num_format3
-
-wb = Workbook()
-
-wb.add_style(st0)
-wb.add_style(st1)
-wb.add_style(st2)
-wb.add_style(st3)
-
-ws0 = wb.add_sheet('0')
-ws0.write(0, 0, 'Olya'*0x4000, st0)
-
-#for i in range(0, 0x10):
-#    ws0.write(i, 2, ('%d'%i)*0x4000, st1)
-    
-wb.save('sst.xls')

config/softs/pyExcelerator-0.6.3a.patched/examples/unicode0.py

@@ -1,16 +0,0 @@
-#!/usr/bin/env python
-# -*- coding: windows-1251 -*-
-# Copyright (C) 2005 Kiseliov Roman
-__rev_id__ = """$Id: unicode0.py,v 1.1 2005/03/27 12:47:06 rvk Exp $"""
-
-
-from pyExcelerator import *
-
-w = Workbook()
-ws1 = w.add_sheet('cp1251')
-
-UnicodeUtils.DEFAULT_ENCODING = 'cp1251'
-ws1.write(0, 0, 'Îëÿ')
-
-w.save('unicode0.xls')
-

config/softs/pyExcelerator-0.6.3a.patched/examples/unicode1.py

@@ -1,30 +0,0 @@
-#!/usr/bin/env python
-# -*- coding: windows-1251 -*-
-# Copyright (C) 2005 Kiseliov Roman
-__rev_id__ = """$Id: unicode1.py,v 1.1 2005/03/27 12:47:06 rvk Exp $"""
-
-
-from pyExcelerator import *
-
-w = Workbook()
-ws1 = w.add_sheet(u'\N{GREEK SMALL LETTER ALPHA}\N{GREEK SMALL LETTER BETA}\N{GREEK SMALL LETTER GAMMA}')
-
-ws1.write(0, 0, u'\N{GREEK SMALL LETTER ALPHA}\N{GREEK SMALL LETTER BETA}\N{GREEK SMALL LETTER GAMMA}')
-ws1.write(1, 1, u'\N{GREEK SMALL LETTER DELTA}x = 1 + \N{GREEK SMALL LETTER DELTA}')
-
-ws1.write(2,0, u'A\u2262\u0391.')     # RFC2152 example
-ws1.write(3,0, u'Hi Mom -\u263a-!')   # RFC2152 example
-ws1.write(4,0, u'\u65E5\u672C\u8A9E') # RFC2152 example
-ws1.write(5,0, u'Item 3 is \u00a31.') # RFC2152 example
-ws1.write(8,0, u'\N{INTEGRAL}')       # RFC2152 example
-
-w.add_sheet(u'A\u2262\u0391.')     # RFC2152 example
-w.add_sheet(u'Hi Mom -\u263a-!')   # RFC2152 example
-one_more_ws = w.add_sheet(u'\u65E5\u672C\u8A9E') # RFC2152 example
-w.add_sheet(u'Item 3 is \u00a31.') # RFC2152 example
-
-one_more_ws.write(0, 0, u'\u2665\u2665')
-
-w.add_sheet(u'\N{GREEK SMALL LETTER ETA WITH TONOS}')
-w.save('unicode1.xls')
-

config/softs/pyExcelerator-0.6.3a.patched/examples/unicode2.py

@@ -1,21 +0,0 @@
-#!/usr/bin/env python
-# -*- coding: windows-1251 -*-
-# Copyright (C) 2005 Kiseliov Roman
-__rev_id__ = """$Id: unicode2.py,v 1.1 2005/03/27 12:47:06 rvk Exp $"""
-
-
-from pyExcelerator import *
-
-w = Workbook()
-ws1 = w.add_sheet(u'\N{GREEK SMALL LETTER ALPHA}\N{GREEK SMALL LETTER BETA}\N{GREEK SMALL LETTER GAMMA}\u2665\u041e\u041b\u042f\u2665')
-
-fnt = Font()
-fnt.height = 26*20
-style = XFStyle()
-style.font = fnt
-
-for i in range(0x10000):
-    ws1.write(i/0x10, i%0x10, unichr(i), style)
-
-w.save('unicode2.xls')
-

config/softs/pyExcelerator-0.6.3a.patched/examples/wsprops.py

@@ -1,157 +0,0 @@
-__rev_id__ = """$Id: wsprops.py,v 1.3 2005/03/27 12:47:06 rvk Exp $"""
-
-props = \
-[
-        'name',
-        'parent',
-        'rows',
-        'cols',
-        'merged_ranges',
-        'bmp_rec',
-        'show_formulas',
-        'show_grid',
-        'show_headers',
-        'panes_frozen',
-        'show_empty_as_zero',
-        'auto_colour_grid',
-        'cols_right_to_left',
-        'show_outline',
-        'remove_splits',
-        'selected',
-        'hidden',
-        'page_preview',
-        'first_visible_row',
-        'first_visible_col',
-        'grid_colour',
-        'preview_magn',
-        'normal_magn',
-        'row_gut_width',
-        'col_gut_height',
-        'show_auto_page_breaks',
-        'dialogue_sheet',
-        'auto_style_outline',
-        'outline_below',
-        'outline_right',
-        'fit_num_pages',
-        'show_row_outline',
-        'show_col_outline',
-        'alt_expr_eval',
-        'alt_formula_entries',
-        'row_default_height',
-        'col_default_width',
-        'calc_mode',
-        'calc_count',
-        'RC_ref_mode',
-        'iterations_on',
-        'delta',
-        'save_recalc',
-        'print_headers',
-        'print_grid',
-        'grid_set',
-        'vert_page_breaks',
-        'horz_page_breaks',
-        'header_str',
-        'footer_str',
-        'print_centered_vert',
-        'print_centered_horz',
-        'left_margin',
-        'right_margin',
-        'top_margin',
-        'bottom_margin',
-        'paper_size_code',
-        'print_scaling',
-        'start_page_number',
-        'fit_width_to_pages',
-        'fit_height_to_pages',
-        'print_in_rows',
-        'portrait',
-        'print_not_colour',
-        'print_draft',
-        'print_notes',
-        'print_notes_at_end',
-        'print_omit_errors',
-        'print_hres',
-        'print_vres',
-        'header_margin',
-        'footer_margin',
-        'copies_num',
-]
-
-from pyExcelerator import *
-
-wb = Workbook()
-ws = wb.add_sheet('sheet')
-
-print ws.name
-print ws.parent
-print ws.rows
-print ws.cols
-print ws.merged_ranges
-print ws.bmp_rec
-print ws.show_formulas
-print ws.show_grid
-print ws.show_headers
-print ws.panes_frozen
-print ws.show_empty_as_zero
-print ws.auto_colour_grid
-print ws.cols_right_to_left
-print ws.show_outline
-print ws.remove_splits
-print ws.selected
-print ws.hidden
-print ws.page_preview
-print ws.first_visible_row
-print ws.first_visible_col
-print ws.grid_colour
-print ws.preview_magn
-print ws.normal_magn
-#print ws.row_gut_width
-#print ws.col_gut_height
-print ws.show_auto_page_breaks
-print ws.dialogue_sheet
-print ws.auto_style_outline
-print ws.outline_below
-print ws.outline_right
-print ws.fit_num_pages
-print ws.show_row_outline
-print ws.show_col_outline
-print ws.alt_expr_eval
-print ws.alt_formula_entries
-print ws.row_default_height
-print ws.col_default_width
-print ws.calc_mode
-print ws.calc_count
-print ws.RC_ref_mode
-print ws.iterations_on
-print ws.delta
-print ws.save_recalc
-print ws.print_headers
-print ws.print_grid
-#print ws.grid_set
-print ws.vert_page_breaks
-print ws.horz_page_breaks
-print ws.header_str
-print ws.footer_str
-print ws.print_centered_vert
-print ws.print_centered_horz
-print ws.left_margin
-print ws.right_margin
-print ws.top_margin
-print ws.bottom_margin
-print ws.paper_size_code
-print ws.print_scaling
-print ws.start_page_number
-print ws.fit_width_to_pages
-print ws.fit_height_to_pages
-print ws.print_in_rows
-print ws.portrait
-print ws.print_colour
-print ws.print_draft
-print ws.print_notes
-print ws.print_notes_at_end
-print ws.print_omit_errors
-print ws.print_hres
-print ws.print_vres
-print ws.header_margin
-print ws.footer_margin
-print ws.copies_num

config/softs/pyExcelerator-0.6.3a.patched/hrc/CVS/Entries

@@ -1,3 +0,0 @@
-/py-2.4-hrc.py/1.1/Tue Jul 19 18:58:44 2005//
-/python.hrc/1.2/Tue Jul 19 18:58:44 2005//
-D

config/softs/pyExcelerator-0.6.3a.patched/hrc/CVS/Entries.Extra

@@ -1,2 +0,0 @@
-/py-2.4-hrc.py////*///
-/python.hrc////*///

config/softs/pyExcelerator-0.6.3a.patched/hrc/CVS/Entries.Extra.Old

@@ -1,2 +0,0 @@
-/py-2.4-hrc.py////*///
-/python.hrc////*///

config/softs/pyExcelerator-0.6.3a.patched/hrc/CVS/Entries.Old

@@ -1,3 +0,0 @@
-/py-2.4-hrc.py/1.1/Thu Mar 24 15:30:01 2005//
-/python.hrc/1.2/Sun Mar 27 12:47:06 2005//
-D

config/softs/pyExcelerator-0.6.3a.patched/hrc/CVS/Repository

@@ -1 +0,0 @@
-pyExcelerator/hrc

config/softs/pyExcelerator-0.6.3a.patched/hrc/CVS/Root

@@ -1 +0,0 @@
-:ext:rvk@cvs.sf.net:/cvsroot/pyexcelerator

config/softs/pyExcelerator-0.6.3a.patched/hrc/py-2.4-hrc.py

@@ -1,312 +0,0 @@
-specials = [
-    "Ellipsis", 
-    "False", 
-    "None", 
-    "NotImplemented", 
-    "True", 
-    "__abs__", 
-    "__add__", 
-    "__and__", 
-    "__base__", 
-    "__bases__", 
-    "__basicsize__", 
-    "__builtins__", 
-    "__call__", 
-    "__class__", 
-    "__cmp__", 
-    "__coerce__", 
-    "__contains__", 
-    "__debug__", 
-    "__del__", 
-    "__delattr__", 
-    "__delete__", 
-    "__delitem__", 
-    "__delslice__", 
-    "__dict__", 
-    "__dictoffset__", 
-    "__div__", 
-    "__divmod__", 
-    "__doc__", 
-    "__eq__", 
-    "__flags__", 
-    "__float__", 
-    "__floordiv__", 
-    "__ge__", 
-    "__get__", 
-    "__getattr__", 
-    "__getattribute__", 
-    "__getitem__", 
-    "__getnewargs__", 
-    "__getslice__", 
-    "__gt__", 
-    "__hash__", 
-    "__hex__", 
-    "__iadd__", 
-    "__iand__", 
-    "__idiv__", 
-    "__ifloordiv__", 
-    "__ilshift__", 
-    "__imod__", 
-    "__import__", 
-    "__imul__", 
-    "__init__", 
-    "__int__", 
-    "__invert__", 
-    "__ior__", 
-    "__ipow__", 
-    "__irshift__", 
-    "__isub__", 
-    "__itemsize__", 
-    "__iter__", 
-    "__itruediv__", 
-    "__ixor__", 
-    "__le__", 
-    "__len__", 
-    "__long__", 
-    "__lshift__", 
-    "__lt__", 
-    "__main__", 
-    "__mod__", 
-    "__module__", 
-    "__mro__", 
-    "__mul__", 
-    "__name__", 
-    "__ne__", 
-    "__neg__", 
-    "__new__", 
-    "__nonzero__", 
-    "__oct__", 
-    "__or__", 
-    "__pos__", 
-    "__pow__", 
-    "__radd__", 
-    "__rand__", 
-    "__rdiv__", 
-    "__rdivmod__", 
-    "__reduce__", 
-    "__reduce_ex__", 
-    "__repr__", 
-    "__rfloordiv__", 
-    "__rlshift__", 
-    "__rmod__", 
-    "__rmul__", 
-    "__ror__", 
-    "__rpow__", 
-    "__rrshift__", 
-    "__rshift__", 
-    "__rsub__", 
-    "__rtruediv__", 
-    "__rxor__", 
-    "__set__", 
-    "__setattr__", 
-    "__setitem__", 
-    "__setslice__", 
-    "__str__", 
-    "__sub__", 
-    "__truediv__", 
-    "__weakrefoffset__", 
-    "__xor__", 
-    "abs", 
-    "apply", 
-    "basestring", 
-    "bool", 
-    "buffer", 
-    "callable", 
-    "capitalize", 
-    "center", 
-    "chr", 
-    "classmethod", 
-    "cmp", 
-    "coerce", 
-    "compile", 
-    "complex", 
-    "count", 
-    "decode", 
-    "delattr", 
-    "dict", 
-    "dir", 
-    "divmod", 
-    "encode", 
-    "endswith", 
-    "enumerate", 
-    "eval", 
-    "execfile", 
-    "exit", 
-    "expandtabs", 
-    "file", 
-    "filter", 
-    "find", 
-    "float", 
-    "frozenset", 
-    "getattr", 
-    "globals", 
-    "hasattr", 
-    "hash", 
-    "hex", 
-    "id", 
-    "index", 
-    "input", 
-    "int", 
-    "intern", 
-    "isalnum", 
-    "isalpha", 
-    "isdigit", 
-    "isinstance", 
-    "islower", 
-    "isspace", 
-    "issubclass", 
-    "istitle", 
-    "isupper", 
-    "iter", 
-    "join", 
-    "len", 
-    "list", 
-    "ljust", 
-    "locals", 
-    "long", 
-    "lower", 
-    "lstrip", 
-    "map", 
-    "max", 
-    "min", 
-    "next", 
-    "object", 
-    "oct", 
-    "open", 
-    "ord", 
-    "pow", 
-    "property", 
-    "quit", 
-    "range", 
-    "raw_input", 
-    "reduce", 
-    "reload", 
-    "replace", 
-    "repr", 
-    "reversed", 
-    "rfind", 
-    "rindex", 
-    "rjust", 
-    "round", 
-    "rsplit", 
-    "rstrip", 
-    "set", 
-    "setattr", 
-    "slice", 
-    "sorted", 
-    "split", 
-    "splitlines", 
-    "startswith", 
-    "staticmethod", 
-    "str", 
-    "strip", 
-    "sum", 
-    "super", 
-    "swapcase", 
-    "title", 
-    "translate", 
-    "tuple", 
-    "type", 
-    "unichr", 
-    "unicode", 
-    "upper", 
-    "vars", 
-    "xrange", 
-    "zfill", 
-    "zip"
-]
-
-exceptions = [
-    "Exception",
-    "SystemExit",
-    "StopIteration",
-    "StandardError",
-    "KeyboardInterrupt",
-    "ImportError",
-    "EnvironmentError",
-    "IOError",
-    "OSError",
-    "WindowsError",
-    "EOFError",
-    "RuntimeError",
-    "NotImplementedError",
-    "NameError",
-    "UnboundLocalError",
-    "AttributeError",
-    "SyntaxError",
-    "IndentationError",
-    "TabError",
-    "TypeError",
-    "AssertionError",
-    "LookupError",
-    "IndexError",
-    "KeyError",
-    "ArithmeticError",
-    "OverflowError",
-    "ZeroDivisionError",
-    "FloatingPointError",
-    "ValueError",
-    "UnicodeError",
-    "UnicodeEncodeError",
-    "UnicodeDecodeError",
-    "UnicodeTranslateError",
-    "ReferenceError",
-    "SystemError",
-    "MemoryError",
-    "Warning",
-    "UserWarning",
-    "DeprecationWarning",
-    "PendingDeprecationWarning",
-    "SyntaxWarning",
-    "OverflowWarning", # not generated in 2.4; won't exist in 2.5
-    "RuntimeWarning",
-    "FutureWarning"
-]
-
-reserved_words = [
-    "and",
-    "del",       
-    "for",       
-    "is",       
-    "raise",
-    "assert",    
-    "elif",
-    "from" ,     
-    "lambda",    
-    "return",   
-    "break",     
-    "else",      
-    "global",    
-    "not",
-    "try",     
-    "class",     
-    "except",    
-    "if",   
-    "or",        
-    "while",    
-    "continue",  
-    "exec",      
-    "import",    
-    "pass" ,     
-    "yield" ,   
-    "def",       
-    "finally",   
-    "in",        
-    "print"
-]
-
-print '<keywords region="pyWord">'
-for word in sorted(reserved_words):
-    print '    <word name="%s"/>' % word
-print '</keywords>'
-
-print '<keywords region="pyException">'
-for exc in sorted(exceptions):
-    print '    <word name="%s"/>' % exc
-print '</keywords>'
-
-print '<keywords region="pyBuiltins">'
-for special in sorted(specials):
-    print '    <word name="%s"/>' % special
-print '</keywords>'
-

config/softs/pyExcelerator-0.6.3a.patched/hrc/python.hrc

@@ -1,347 +0,0 @@
-<?xml version="1.0" encoding="Windows-1251"?>
-<!DOCTYPE hrc SYSTEM "../hrc.dtd">
-<?xml-stylesheet type="text/xsl" href="../hrc.xsl"?>
-<!--
-    Python Defs
-With help of:
-    Grzegorz Makarewicz <mak@mikroplan.com.pl>
--->
-
-<!--
-    Updated by Roman V. Kiseliov <roman@kiseliov.ru>
-    for Python 2.4
--->
-<hrc>
-
-<define name="pyString"   value="dString"/>
-<define name="pyComment"  value="dComment"/>
-<define name="pySymb"     value="dSymbol"/>
-<define name="pyWord"     value="dKeyword"/>
-<define name="pyBuiltins" value="dLabel"/>
-<define name="pyOctNumb"  value="dNumOct"/>
-
-<define name="pyException" value="dLabel"/>
-
-<scheme name="python">
-   <regexp match="/(\#.*$)/" region0="pyComment"/>
-   <block start='/\"\"\"/' end='/\"\"\"/' scheme="Comment"
-          region="pyComment" region00="dpOpenStruct" region10="dpCloseStruct"/>
-   <block start="/'''/" end="/'''/" scheme="Comment"
-          region="pyComment" region00="dpOpenStruct" region10="dpCloseStruct"/>
-   <!-- Strings -->
-   <regexp match='/("((\\.)|[^\\"])*?")/' region0="pyString"/>
-   <regexp match="/('((\\.)|[^\\'])*?')/" region0="pyString"/>
-
-   <!-- Numbers -->
-   <inherit scheme="mFloatNumb"/>
-   <inherit scheme="mcHexNumb"/>
-   <inherit scheme="mDecNumb"/>
-   <regexp match="/\b(0[0-7]*[Ll]?)\B/" region0="pyOctNumb"/>
-   <regexp match="/(`.*`)/" region0="pyBuiltins"/>
-
-   <keywords region="pySymb">
-      <symb name=";"/><symb name="="/><symb name="+"/><symb name="-"/>
-      <symb name="/"/><symb name="*"/><symb name="&amp;"/><symb name="|"/>
-      <symb name="^"/><symb name="("/><symb name=")"/><symb name="["/>
-      <symb name="]"/><symb name=","/><symb name="."/><symb name=":"/>
-      <symb name="!"/><symb name="~"/><symb name="&lt;"/><symb name="&gt;"/>
-      <symb name="%"/><symb name="{"/><symb name="}"/><symb name="?"/>
-      <symb name="@"/>
-   </keywords>
-   <keywords region="pyWord">
-       <word name="and"/>
-       <word name="assert"/>
-       <word name="break"/>
-       <word name="class"/>
-       <word name="continue"/>
-       <word name="def"/>
-       <word name="del"/>
-       <word name="elif"/>
-       <word name="else"/>
-       <word name="except"/>
-       <word name="exec"/>
-       <word name="finally"/>
-       <word name="for"/>
-       <word name="from"/>
-       <word name="global"/>
-       <word name="if"/>
-       <word name="import"/>
-       <word name="in"/>
-       <word name="is"/>
-       <word name="lambda"/>
-       <word name="not"/>
-       <word name="or"/>
-       <word name="pass"/>
-       <word name="print"/>
-       <word name="raise"/>
-       <word name="return"/>
-       <word name="try"/>
-       <word name="while"/>
-       <word name="yield"/>
-   </keywords>
-   <keywords region="pyException">
-       <word name="ArithmeticError"/>
-       <word name="AssertionError"/>
-       <word name="AttributeError"/>
-       <word name="DeprecationWarning"/>
-       <word name="EOFError"/>
-       <word name="EnvironmentError"/>
-       <word name="Exception"/>
-       <word name="FloatingPointError"/>
-       <word name="FutureWarning"/>
-       <word name="IOError"/>
-       <word name="ImportError"/>
-       <word name="IndentationError"/>
-       <word name="IndexError"/>
-       <word name="KeyError"/>
-       <word name="KeyboardInterrupt"/>
-       <word name="LookupError"/>
-       <word name="MemoryError"/>
-       <word name="NameError"/>
-       <word name="NotImplementedError"/>
-       <word name="OSError"/>
-       <word name="OverflowError"/>
-       <word name="OverflowWarning"/>
-       <word name="PendingDeprecationWarning"/>
-       <word name="ReferenceError"/>
-       <word name="RuntimeError"/>
-       <word name="RuntimeWarning"/>
-       <word name="StandardError"/>
-       <word name="StopIteration"/>
-       <word name="SyntaxError"/>
-       <word name="SyntaxWarning"/>
-       <word name="SystemError"/>
-       <word name="SystemExit"/>
-       <word name="TabError"/>
-       <word name="TypeError"/>
-       <word name="UnboundLocalError"/>
-       <word name="UnicodeDecodeError"/>
-       <word name="UnicodeEncodeError"/>
-       <word name="UnicodeError"/>
-       <word name="UnicodeTranslateError"/>
-       <word name="UserWarning"/>
-       <word name="ValueError"/>
-       <word name="Warning"/>
-       <word name="WindowsError"/>
-       <word name="ZeroDivisionError"/>
-   </keywords>
-   <keywords region="pyBuiltins">
-       <word name="Ellipsis"/>
-       <word name="False"/>
-       <word name="None"/>
-       <word name="NotImplemented"/>
-       <word name="True"/>
-       <word name="__abs__"/>
-       <word name="__add__"/>
-       <word name="__and__"/>
-       <word name="__base__"/>
-       <word name="__bases__"/>
-       <word name="__basicsize__"/>
-       <word name="__builtins__"/>
-       <word name="__call__"/>
-       <word name="__class__"/>
-       <word name="__cmp__"/>
-       <word name="__coerce__"/>
-       <word name="__contains__"/>
-       <word name="__debug__"/>
-       <word name="__del__"/>
-       <word name="__delattr__"/>
-       <word name="__delete__"/>
-       <word name="__delitem__"/>
-       <word name="__delslice__"/>
-       <word name="__dict__"/>
-       <word name="__dictoffset__"/>
-       <word name="__div__"/>
-       <word name="__divmod__"/>
-       <word name="__doc__"/>
-       <word name="__eq__"/>
-       <word name="__flags__"/>
-       <word name="__float__"/>
-       <word name="__floordiv__"/>
-       <word name="__ge__"/>
-       <word name="__get__"/>
-       <word name="__getattr__"/>
-       <word name="__getattribute__"/>
-       <word name="__getitem__"/>
-       <word name="__getnewargs__"/>
-       <word name="__getslice__"/>
-       <word name="__gt__"/>
-       <word name="__hash__"/>
-       <word name="__hex__"/>
-       <word name="__iadd__"/>
-       <word name="__iand__"/>
-       <word name="__idiv__"/>
-       <word name="__ifloordiv__"/>
-       <word name="__ilshift__"/>
-       <word name="__imod__"/>
-       <word name="__import__"/>
-       <word name="__imul__"/>
-       <word name="__init__"/>
-       <word name="__int__"/>
-       <word name="__invert__"/>
-       <word name="__ior__"/>
-       <word name="__ipow__"/>
-       <word name="__irshift__"/>
-       <word name="__isub__"/>
-       <word name="__itemsize__"/>
-       <word name="__iter__"/>
-       <word name="__itruediv__"/>
-       <word name="__ixor__"/>
-       <word name="__le__"/>
-       <word name="__len__"/>
-       <word name="__long__"/>
-       <word name="__lshift__"/>
-       <word name="__lt__"/>
-       <word name="__main__"/>
-       <word name="__mod__"/>
-       <word name="__module__"/>
-       <word name="__mro__"/>
-       <word name="__mul__"/>
-       <word name="__name__"/>
-       <word name="__ne__"/>
-       <word name="__neg__"/>
-       <word name="__new__"/>
-       <word name="__nonzero__"/>
-       <word name="__oct__"/>
-       <word name="__or__"/>
-       <word name="__pos__"/>
-       <word name="__pow__"/>
-       <word name="__radd__"/>
-       <word name="__rand__"/>
-       <word name="__rdiv__"/>
-       <word name="__rdivmod__"/>
-       <word name="__reduce__"/>
-       <word name="__reduce_ex__"/>
-       <word name="__repr__"/>
-       <word name="__rfloordiv__"/>
-       <word name="__rlshift__"/>
-       <word name="__rmod__"/>
-       <word name="__rmul__"/>
-       <word name="__ror__"/>
-       <word name="__rpow__"/>
-       <word name="__rrshift__"/>
-       <word name="__rshift__"/>
-       <word name="__rsub__"/>
-       <word name="__rtruediv__"/>
-       <word name="__rxor__"/>
-       <word name="__set__"/>
-       <word name="__setattr__"/>
-       <word name="__setitem__"/>
-       <word name="__setslice__"/>
-       <word name="__str__"/>
-       <word name="__sub__"/>
-       <word name="__truediv__"/>
-       <word name="__weakrefoffset__"/>
-       <word name="__xor__"/>
-       <word name="abs"/>
-       <word name="apply"/>
-       <word name="basestring"/>
-       <word name="bool"/>
-       <word name="buffer"/>
-       <word name="callable"/>
-       <word name="capitalize"/>
-       <word name="center"/>
-       <word name="chr"/>
-       <word name="classmethod"/>
-       <word name="cmp"/>
-       <word name="coerce"/>
-       <word name="compile"/>
-       <word name="complex"/>
-       <word name="count"/>
-       <word name="decode"/>
-       <word name="delattr"/>
-       <word name="dict"/>
-       <word name="dir"/>
-       <word name="divmod"/>
-       <word name="encode"/>
-       <word name="endswith"/>
-       <word name="enumerate"/>
-       <word name="eval"/>
-       <word name="execfile"/>
-       <word name="exit"/>
-       <word name="expandtabs"/>
-       <word name="file"/>
-       <word name="filter"/>
-       <word name="find"/>
-       <word name="float"/>
-       <word name="frozenset"/>
-       <word name="getattr"/>
-       <word name="globals"/>
-       <word name="hasattr"/>
-       <word name="hash"/>
-       <word name="hex"/>
-       <word name="id"/>
-       <word name="index"/>
-       <word name="input"/>
-       <word name="int"/>
-       <word name="intern"/>
-       <word name="isalnum"/>
-       <word name="isalpha"/>
-       <word name="isdigit"/>
-       <word name="isinstance"/>
-       <word name="islower"/>
-       <word name="isspace"/>
-       <word name="issubclass"/>
-       <word name="istitle"/>
-       <word name="isupper"/>
-       <word name="iter"/>
-       <word name="join"/>
-       <word name="len"/>
-       <word name="list"/>
-       <word name="ljust"/>
-       <word name="locals"/>
-       <word name="long"/>
-       <word name="lower"/>
-       <word name="lstrip"/>
-       <word name="map"/>
-       <word name="max"/>
-       <word name="min"/>
-       <word name="next"/>
-       <word name="object"/>
-       <word name="oct"/>
-       <word name="open"/>
-       <word name="ord"/>
-       <word name="pow"/>
-       <word name="property"/>
-       <word name="quit"/>
-       <word name="range"/>
-       <word name="raw_input"/>
-       <word name="reduce"/>
-       <word name="reload"/>
-       <word name="replace"/>
-       <word name="repr"/>
-       <word name="reversed"/>
-       <word name="rfind"/>
-       <word name="rindex"/>
-       <word name="rjust"/>
-       <word name="round"/>
-       <word name="rsplit"/>
-       <word name="rstrip"/>
-       <word name="set"/>
-       <word name="setattr"/>
-       <word name="slice"/>
-       <word name="sorted"/>
-       <word name="split"/>
-       <word name="splitlines"/>
-       <word name="startswith"/>
-       <word name="staticmethod"/>
-       <word name="str"/>
-       <word name="strip"/>
-       <word name="sum"/>
-       <word name="super"/>
-       <word name="swapcase"/>
-       <word name="title"/>
-       <word name="translate"/>
-       <word name="tuple"/>
-       <word name="type"/>
-       <word name="unichr"/>
-       <word name="unicode"/>
-       <word name="upper"/>
-       <word name="vars"/>
-       <word name="xrange"/>
-       <word name="zfill"/>
-       <word name="zip"/>
-   </keywords>
-</scheme>
-
-</hrc>

config/softs/pyExcelerator-0.6.3a.patched/museum/CVS/Entries

@@ -1,9 +0,0 @@
-/frmla.xls/1.1/Tue Aug  2 18:56:30 2005/-kb/
-/chart1v8.xls/1.1/Tue Jul 19 18:58:44 2005/-kb/
-/excel2003.xls/1.1/Tue Jul 19 18:58:44 2005/-kb/
-/macro2v8.xls/1.1/Tue Jul 19 18:58:44 2005/-kb/
-/mini-mini.xls/1.1/Tue Jul 19 18:58:44 2005/-kb/
-/mini.xls/1.1/Tue Jul 19 18:58:44 2005/-kb/
-/oo14.xls/1.1/Tue Jul 19 18:58:44 2005/-kb/
-/P-0508-0000507647-3280-5298.xls/1.1/Thu Sep 29 08:49:20 2005/-kb/
-D

config/softs/pyExcelerator-0.6.3a.patched/museum/CVS/Entries.Extra

@@ -1,8 +0,0 @@
-/frmla.xls////*///
-/chart1v8.xls////*///
-/excel2003.xls////*///
-/macro2v8.xls////*///
-/mini-mini.xls////*///
-/mini.xls////*///
-/oo14.xls////*///
-/P-0508-0000507647-3280-5298.xls////*///

config/softs/pyExcelerator-0.6.3a.patched/museum/CVS/Entries.Extra.Old

@@ -1,8 +0,0 @@
-/frmla.xls////*///
-/chart1v8.xls////*///
-/excel2003.xls////*///
-/macro2v8.xls////*///
-/mini-mini.xls////*///
-/mini.xls////*///
-/oo14.xls////*///
-/P-0508-0000507647-3280-5298.xls////*///

config/softs/pyExcelerator-0.6.3a.patched/museum/CVS/Entries.Old

@@ -1,9 +0,0 @@
-/frmla.xls/1.1/Tue Aug  2 18:56:30 2005/-kb/
-/chart1v8.xls/1.1/Tue Jul 19 18:58:44 2005/-kb/
-/excel2003.xls/1.1/Tue Jul 19 18:58:44 2005/-kb/
-/macro2v8.xls/1.1/Tue Jul 19 18:58:44 2005/-kb/
-/mini-mini.xls/1.1/Tue Jul 19 18:58:44 2005/-kb/
-/mini.xls/1.1/Tue Jul 19 18:58:44 2005/-kb/
-/oo14.xls/1.1/Tue Jul 19 18:58:44 2005/-kb/
-/P-0508-0000507647-3280-5298.xls/0/dummy timestamp/-kb/
-D

config/softs/pyExcelerator-0.6.3a.patched/museum/CVS/Repository

@@ -1 +0,0 @@
-pyExcelerator/museum

config/softs/pyExcelerator-0.6.3a.patched/museum/CVS/Root

@@ -1 +0,0 @@
-:ext:rvk@cvs.sf.net:/cvsroot/pyexcelerator

config/softs/pyExcelerator-0.6.3a.patched/pyExcelerator/Bitmap.py

@@ -1,305 +0,0 @@
-#!/usr/bin/env python
-# -*- coding: windows-1251 -*-
-
-#  Copyright (C) 2005 Roman V. Kiseliov
-
-#  Portions are Copyright (c) 2004 Evgeny Filatov <fufff@users.sourceforge.net>
-
-#  Portions are Copyright (c) 2002-2004 John McNamara (Perl Spreadsheet::WriteExcel)
-
-#  All rights reserved.
-
-# 
-#  Redistribution and use in source and binary forms, with or without
-#  modification, are permitted provided that the following conditions
-#  are met:
-# 
-#  1. Redistributions of source code must retain the above copyright
-#     notice, this list of conditions and the following disclaimer.
-# 
-#  2. Redistributions in binary form must reproduce the above copyright
-#     notice, this list of conditions and the following disclaimer in
-#     the documentation and/or other materials provided with the
-#     distribution.
-# 
-#  3. All advertising materials mentioning features or use of this
-#     software must display the following acknowledgment:
-#     "This product includes software developed by
-#      Roman V. Kiseliov <roman@kiseliov.ru>."
-# 
-#  4. Redistributions of any form whatsoever must retain the following
-#     acknowledgment:
-#     "This product includes software developed by
-#      Roman V. Kiseliov <roman@kiseliov.ru>."
-# 
-#  THIS SOFTWARE IS PROVIDED BY Roman V. Kiseliov ``AS IS'' AND ANY
-#  EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-#  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-#  PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL Roman V. Kiseliov OR
-#  ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-#  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-#  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-#  HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-#  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-#  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
-#  OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-__rev_id__ = """$Id: Bitmap.py,v 1.4 2005/07/20 07:24:11 rvk Exp $"""
-
-
-from BIFFRecords import BiffRecord
-from struct import *
-
-
-def _size_col(sheet, col):
-    return sheet.col_width(col)
-
-
-def _size_row(sheet, row):
-    return sheet.row_height(row)     
-
-
-def _position_image(sheet, row_start, col_start, x1, y1, width, height):
-    """Calculate the vertices that define the position of the image as required by
-    the OBJ record.
-
-             +------------+------------+
-             |     A      |      B     |
-       +-----+------------+------------+
-       |     |(x1,y1)     |            |
-       |  1  |(A1)._______|______      |
-       |     |    |              |     |
-       |     |    |              |     |
-       +-----+----|    BITMAP    |-----+
-       |     |    |              |     |
-       |  2  |    |______________.     |
-       |     |            |        (B2)|
-       |     |            |     (x2,y2)|
-       +---- +------------+------------+
-
-    Example of a bitmap that covers some of the area from cell A1 to cell B2.
-
-    Based on the width and height of the bitmap we need to calculate 8 vars:
-        col_start, row_start, col_end, row_end, x1, y1, x2, y2.
-    The width and height of the cells are also variable and have to be taken into
-    account.
-    The values of col_start and row_start are passed in from the calling
-    function. The values of col_end and row_end are calculated by subtracting
-    the width and height of the bitmap from the width and height of the
-    underlying cells.
-    The vertices are expressed as a percentage of the underlying cell width as
-    follows (rhs values are in pixels):
-
-           x1 = X / W *1024
-           y1 = Y / H *256
-           x2 = (X-1) / W *1024
-           y2 = (Y-1) / H *256
-
-           Where:  X is distance from the left side of the underlying cell
-                   Y is distance from the top of the underlying cell
-                   W is the width of the cell
-                   H is the height of the cell
-
-    Note: the SDK incorrectly states that the height should be expressed as a
-    percentage of 1024.
-
-    col_start  - Col containing upper left corner of object
-    row_start  - Row containing top left corner of object
-    x1  - Distance to left side of object
-    y1  - Distance to top of object
-    width  - Width of image frame
-    height  - Height of image frame
-    
-    """
-    # Adjust start column for offsets that are greater than the col width
-    while x1 >= _size_col(sheet, col_start):
-        x1 -= _size_col(sheet, col_start)
-        col_start += 1
-    # Adjust start row for offsets that are greater than the row height
-    while y1 >= _size_row(sheet, row_start):
-        y1 -= _size_row(sheet, row_start)
-        row_start += 1
-    # Initialise end cell to the same as the start cell
-    row_end = row_start   # Row containing bottom right corner of object
-    col_end = col_start   # Col containing lower right corner of object
-    width = width + x1 - 1
-    height = height + y1 - 1
-    # Subtract the underlying cell widths to find the end cell of the image
-    while (width >= _size_col(sheet, col_end)):
-        width -= _size_col(sheet, col_end)
-        col_end += 1
-    # Subtract the underlying cell heights to find the end cell of the image
-    while (height >= _size_row(sheet, row_end)):
-        height -= _size_row(sheet, row_end)
-        row_end += 1
-    # Bitmap isn't allowed to start or finish in a hidden cell, i.e. a cell
-    # with zero height or width.
-    if ((_size_col(sheet, col_start) == 0) or (_size_col(sheet, col_end) == 0)
-            or (_size_row(sheet, row_start) == 0) or (_size_row(sheet, row_end) == 0)):
-        return
-    # Convert the pixel values to the percentage value expected by Excel
-    x1 = float(x1) / _size_col(sheet, col_start) * 1024
-    y1 = float(y1) / _size_row(sheet, row_start) * 256
-    # Distance to right side of object
-    x2 = float(width) / _size_col(sheet, col_end) * 1024
-    # Distance to bottom of object
-    y2 = float(height) / _size_row(sheet, row_end) * 256
-    return (col_start, x1, row_start, y1, col_end, x2, row_end, y2)
-
-
-class ObjBmpRecord(BiffRecord):
-    _REC_ID = 0x005D    # Record identifier
-
-    def __init__(self, row, col, sheet, im_data_bmp, x, y, scale_x, scale_y):
-        # Scale the frame of the image.
-        width = im_data_bmp.width * scale_x
-        height = im_data_bmp.height * scale_y
-
-        # Calculate the vertices of the image and write the OBJ record
-        col_start, x1, row_start, y1, col_end, x2, row_end, y2 = _position_image(sheet, row, col, x, y, width, height)
-
-        """Store the OBJ record that precedes an IMDATA record. This could be generalise
-        to support other Excel objects.
-
-        """
-        cObj = 0x0001      # Count of objects in file (set to 1)
-        OT = 0x0008        # Object type. 8 = Picture
-        id = 0x0001        # Object ID
-        grbit = 0x0614     # Option flags
-        colL = col_start    # Col containing upper left corner of object
-        dxL = x1            # Distance from left side of cell
-        rwT = row_start     # Row containing top left corner of object
-        dyT = y1            # Distance from top of cell
-        colR = col_end      # Col containing lower right corner of object
-        dxR = x2            # Distance from right of cell
-        rwB = row_end       # Row containing bottom right corner of object
-        dyB = y2            # Distance from bottom of cell
-        cbMacro = 0x0000    # Length of FMLA structure
-        Reserved1 = 0x0000  # Reserved
-        Reserved2 = 0x0000  # Reserved
-        icvBack = 0x09      # Background colour
-        icvFore = 0x09      # Foreground colour
-        fls = 0x00          # Fill pattern
-        fAuto = 0x00        # Automatic fill
-        icv = 0x08          # Line colour
-        lns = 0xff          # Line style
-        lnw = 0x01          # Line weight
-        fAutoB = 0x00       # Automatic border
-        frs = 0x0000        # Frame style
-        cf = 0x0009         # Image format, 9 = bitmap
-        Reserved3 = 0x0000  # Reserved
-        cbPictFmla = 0x0000 # Length of FMLA structure
-        Reserved4 = 0x0000  # Reserved
-        grbit2 = 0x0001     # Option flags
-        Reserved5 = 0x0000  # Reserved
-        
-        data = pack("<L", cObj)
-        data += pack("<H", OT)
-        data += pack("<H", id)
-        data += pack("<H", grbit)
-        data += pack("<H", colL)
-        data += pack("<H", dxL)
-        data += pack("<H", rwT)
-        data += pack("<H", dyT)
-        data += pack("<H", colR)
-        data += pack("<H", dxR)
-        data += pack("<H", rwB)
-        data += pack("<H", dyB)
-        data += pack("<H", cbMacro)
-        data += pack("<L", Reserved1)
-        data += pack("<H", Reserved2)
-        data += pack("<B", icvBack)
-        data += pack("<B", icvFore)
-        data += pack("<B", fls)
-        data += pack("<B", fAuto)
-        data += pack("<B", icv)
-        data += pack("<B", lns)
-        data += pack("<B", lnw)
-        data += pack("<B", fAutoB)
-        data += pack("<H", frs)
-        data += pack("<L", cf)
-        data += pack("<H", Reserved3)
-        data += pack("<H", cbPictFmla)
-        data += pack("<H", Reserved4)
-        data += pack("<H", grbit2)
-        data += pack("<L", Reserved5)
-
-        self._rec_data = data
-
-def _process_bitmap(bitmap):
-    """Convert a 24 bit bitmap into the modified internal format used by Windows.
-    This is described in BITMAPCOREHEADER and BITMAPCOREINFO structures in the
-    MSDN library.
-
-    """
-    # Open file and binmode the data in case the platform needs it.
-    fh = file(bitmap, "rb")
-    try:
-        # Slurp the file into a string.
-        data = fh.read()
-    finally:
-        fh.close()
-    # Check that the file is big enough to be a bitmap.
-    if len(data) <= 0x36:
-        raise Exception("bitmap doesn't contain enough data.")
-    # The first 2 bytes are used to identify the bitmap.
-    if (data[:2] != "BM"):
-        raise Exception("bitmap doesn't appear to to be a valid bitmap image.")
-    # Remove bitmap data: ID.
-    data = data[2:]
-    # Read and remove the bitmap size. This is more reliable than reading
-    # the data size at offset 0x22.
-    #
-    size = unpack("<L", data[:4])[0]
-    size -=  0x36   # Subtract size of bitmap header.
-    size +=  0x0C   # Add size of BIFF header.
-    data = data[4:]
-    # Remove bitmap data: reserved, offset, header length.
-    data = data[12:]
-    # Read and remove the bitmap width and height. Verify the sizes.
-    width, height = unpack("<LL", data[:8])
-    data = data[8:]
-    if (width > 0xFFFF):
-        raise Exception("bitmap: largest image width supported is 65k.")
-    if (height > 0xFFFF):
-        raise Exception("bitmap: largest image height supported is 65k.")
-    # Read and remove the bitmap planes and bpp data. Verify them.
-    planes, bitcount = unpack("<HH", data[:4])
-    data = data[4:]
-    if (bitcount != 24):
-        raise Exception("bitmap isn't a 24bit true color bitmap.")
-    if (planes != 1):
-        raise Exception("bitmap: only 1 plane supported in bitmap image.")
-    # Read and remove the bitmap compression. Verify compression.
-    compression = unpack("<L", data[:4])[0]
-    data = data[4:]
-    if (compression != 0):
-        raise Exception("bitmap: compression not supported in bitmap image.")
-    # Remove bitmap data: data size, hres, vres, colours, imp. colours.
-    data = data[20:]
-    # Add the BITMAPCOREHEADER data
-    header = pack("<LHHHH", 0x000c, width, height, 0x01, 0x18)
-    data = header + data
-    return (width, height, size, data)
-
-
-class ImDataBmpRecord(BiffRecord):
-    _REC_ID = 0x007F
-
-    def __init__(self, filename):
-        """Insert a 24bit bitmap image in a worksheet. The main record required is
-        IMDATA but it must be proceeded by a OBJ record to define its position.
-
-        """
-        BiffRecord.__init__(self)
-
-        self.width, self.height, self.size, data = _process_bitmap(filename)
-        # Write the IMDATA record to store the bitmap data
-        cf = 0x09
-        env = 0x01
-        lcb = self.size
-        self._rec_data = pack("<HHL", cf, env, lcb) + data
-
-

config/softs/pyExcelerator-0.6.3a.patched/pyExcelerator/CVS/Entries

@@ -1,22 +0,0 @@
-/Cell.py/1.3/Thu Aug 11 08:53:48 2005//
-/Row.py/1.6/Thu Aug 11 08:53:48 2005//
-/__init__.py/1.6/Thu Aug 11 08:53:48 2005//
-/Utils.py/1.1/Thu Aug 11 08:53:48 2005//
-/Bitmap.py/1.4/Wed Jul 20 07:24:10 2005//
-/Column.py/1.4/Wed Jul 20 07:24:10 2005//
-/Deco.py/1.4/Wed Jul 20 07:24:10 2005//
-/ExcelFormulaLexer.py/1.4/Sun Aug 14 06:40:22 2005//
-/ExcelFormulaParser.py/1.4/Sun Aug 14 06:40:22 2005//
-/Formatting.py/1.4/Wed Jul 20 07:24:10 2005//
-/Style.py/1.4/Wed Jul 20 07:24:10 2005//
-/UnicodeUtils.py/1.4/Wed Jul 20 07:24:10 2005//
-/excel-formula.g/1.4/Sun Aug 14 06:40:22 2005//
-/BIFFRecords.py/1.7/Wed Oct 26 07:44:24 2005//
-/CompoundDoc.py/1.7/Wed Oct 26 07:44:24 2005//
-/ExcelMagic.py/1.2/Wed Oct 26 07:44:24 2005//
-/ImportXLS.py/1.6/Wed Oct 26 07:44:24 2005//
-/Workbook.py/1.5/Wed Oct 26 07:44:24 2005//
-/Worksheet.py/1.8/Wed Oct 26 07:44:24 2005//
-/antlr.py/1.2/Wed Oct 26 07:44:24 2005//
-/ExcelFormula.py/1.3/Thu Oct  6 17:36:56 2005//
-D

config/softs/pyExcelerator-0.6.3a.patched/pyExcelerator/CVS/Entries.Extra

@@ -1,21 +0,0 @@
-/Cell.py////*///
-/Row.py////*///
-/__init__.py////*///
-/Utils.py////*///
-/Bitmap.py////*///
-/Column.py////*///
-/Deco.py////*///
-/ExcelFormulaLexer.py////*///
-/ExcelFormulaParser.py////*///
-/Formatting.py////*///
-/Style.py////*///
-/UnicodeUtils.py////*///
-/excel-formula.g////*///
-/BIFFRecords.py////*///
-/CompoundDoc.py////*///
-/ExcelMagic.py////*///
-/ImportXLS.py////*///
-/Workbook.py////*///
-/Worksheet.py////*///
-/antlr.py////*///
-/ExcelFormula.py////*///

config/softs/pyExcelerator-0.6.3a.patched/pyExcelerator/CVS/Entries.Extra.Old

@@ -1,21 +0,0 @@
-/Cell.py////*///
-/ExcelFormula.py////*///
-/Row.py////*///
-/__init__.py////*///
-/Utils.py////*///
-/Bitmap.py////*///
-/Column.py////*///
-/Deco.py////*///
-/ExcelFormulaLexer.py////*///
-/ExcelFormulaParser.py////*///
-/Formatting.py////*///
-/Style.py////*///
-/UnicodeUtils.py////*///
-/excel-formula.g////*///
-/BIFFRecords.py////*///
-/CompoundDoc.py////*///
-/ExcelMagic.py////*///
-/ImportXLS.py////*///
-/Workbook.py////*///
-/Worksheet.py////*///
-/antlr.py////*///

config/softs/pyExcelerator-0.6.3a.patched/pyExcelerator/CVS/Entries.Old

@@ -1,22 +0,0 @@
-/Cell.py/1.3/Thu Aug 11 08:53:48 2005//
-/ExcelFormula.py/1.3/Thu Aug 11 08:53:48 2005//
-/Row.py/1.6/Thu Aug 11 08:53:48 2005//
-/__init__.py/1.6/Thu Aug 11 08:53:48 2005//
-/Utils.py/1.1/Thu Aug 11 08:53:48 2005//
-/Bitmap.py/1.4/Wed Jul 20 07:24:10 2005//
-/Column.py/1.4/Wed Jul 20 07:24:10 2005//
-/Deco.py/1.4/Wed Jul 20 07:24:10 2005//
-/ExcelFormulaLexer.py/1.4/Sun Aug 14 06:40:22 2005//
-/ExcelFormulaParser.py/1.4/Sun Aug 14 06:40:22 2005//
-/Formatting.py/1.4/Wed Jul 20 07:24:10 2005//
-/Style.py/1.4/Wed Jul 20 07:24:10 2005//
-/UnicodeUtils.py/1.4/Wed Jul 20 07:24:10 2005//
-/excel-formula.g/1.4/Sun Aug 14 06:40:22 2005//
-/BIFFRecords.py/1.7/Wed Oct 26 07:44:24 2005//
-/CompoundDoc.py/1.7/Wed Oct 26 07:44:24 2005//
-/ExcelMagic.py/1.2/Wed Oct 26 07:44:24 2005//
-/ImportXLS.py/1.6/Wed Oct 26 07:44:24 2005//
-/Workbook.py/1.5/Wed Oct 26 07:44:24 2005//
-/Worksheet.py/1.8/Wed Oct 26 07:44:24 2005//
-/antlr.py/1.2/Wed Oct 26 07:44:24 2005//
-D

config/softs/pyExcelerator-0.6.3a.patched/pyExcelerator/CVS/Repository

@@ -1 +0,0 @@
-pyExcelerator/pyExcelerator

config/softs/pyExcelerator-0.6.3a.patched/pyExcelerator/CVS/Root

@@ -1 +0,0 @@
-:ext:rvk@cvs.sf.net:/cvsroot/pyexcelerator

config/softs/pyExcelerator-0.6.3a.patched/pyExcelerator/Cell.py

@@ -1,169 +0,0 @@
-#!/usr/bin/env python
-# -*- coding: windows-1251 -*-
-
-#  Copyright (C) 2005 Roman V. Kiseliov
-#  All rights reserved.
-# 
-#  Redistribution and use in source and binary forms, with or without
-#  modification, are permitted provided that the following conditions
-#  are met:
-# 
-#  1. Redistributions of source code must retain the above copyright
-#     notice, this list of conditions and the following disclaimer.
-# 
-#  2. Redistributions in binary form must reproduce the above copyright
-#     notice, this list of conditions and the following disclaimer in
-#     the documentation and/or other materials provided with the
-#     distribution.
-# 
-#  3. All advertising materials mentioning features or use of this
-#     software must display the following acknowledgment:
-#     "This product includes software developed by
-#      Roman V. Kiseliov <roman@kiseliov.ru>."
-# 
-#  4. Redistributions of any form whatsoever must retain the following
-#     acknowledgment:
-#     "This product includes software developed by
-#      Roman V. Kiseliov <roman@kiseliov.ru>."
-# 
-#  THIS SOFTWARE IS PROVIDED BY Roman V. Kiseliov ``AS IS'' AND ANY
-#  EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-#  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-#  PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL Roman V. Kiseliov OR
-#  ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-#  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-#  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-#  HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-#  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-#  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
-#  OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-__rev_id__ = """$Id: Cell.py,v 1.3 2005/08/11 08:53:48 rvk Exp $"""
-
-
-import struct
-import BIFFRecords
-
-
-class StrCell(object):
-    __slots__ = ["__init__", "get_biff_data",
-                "__parent", "__idx", "__xf_idx", "__sst_idx"]
-
-    def __init__(self, parent, idx, xf_idx, sst_idx):
-        self.__parent = parent
-        self.__idx = idx
-        self.__xf_idx = xf_idx
-        self.__sst_idx = sst_idx
-
-    def get_biff_data(self):
-        return BIFFRecords.LabelSSTRecord(self.__parent.get_index(), self.__idx, self.__xf_idx, self.__sst_idx).get()
-
-
-class BlankCell(object):
-    __slots__ = ["__init__", "get_biff_data",
-                "__parent", "__idx", "__xf_idx"]
-
-    def __init__(self, parent, idx, xf_idx):
-        self.__parent = parent
-        self.__idx = idx
-        self.__xf_idx = xf_idx
-
-    def get_biff_data(self):
-        return BIFFRecords.BlankRecord(self.__parent.get_index(), self.__idx, self.__xf_idx).get()
-
-
-class MulBlankCell(object):
-    __slots__ = ["__init__", "get_biff_data",
-                "__parent", "__col1", "__col2", "__xf_idx"]
-
-    def __init__(self, parent, col1, col2, xf_idx):
-        self.__parent = parent
-        self.__col1 = col1
-        self.__col2 = col2
-        self.__xf_idx = xf_idx
-
-    def get_biff_data(self):
-        return BIFFRecords.MulBlankRecord(self.__parent.get_index(), self.__col1, self.__col2, self.__xf_idx).get()
-
-
-class NumberCell(object):
-    __slots__ = ["__init__", "get_biff_data",
-                "__parent", "__idx", "__xf_idx", "__number"]
-
-
-    def __init__(self, parent, idx, xf_idx, number):
-        self.__parent = parent
-        self.__idx = idx
-        self.__xf_idx = xf_idx
-        self.__number = float(number)
-
-
-    def get_biff_data(self):
-        rk_encoded = 0
-
-        packed = struct.pack('<d', self.__number)
-
-        #print self.__number
-        w0, w1, w2, w3 = struct.unpack('<4H', packed)
-        if w0 == 0 and w1 == 0 and w2 & 0xFFFC == w2:
-            # 34 lsb are 0
-            #print "float RK"
-            rk_encoded = (w3 << 16) | w2
-            return BIFFRecords.RKRecord(self.__parent.get_index(), self.__idx, self.__xf_idx, rk_encoded).get()
-
-        if abs(self.__number) < 0x40000000 and int(self.__number) == self.__number:
-            #print "30-bit integer RK"
-            rk_encoded = 2 | (int(self.__number) << 2)
-            return BIFFRecords.RKRecord(self.__parent.get_index(), self.__idx, self.__xf_idx, rk_encoded).get()
-
-        temp = self.__number*100
-        packed100 = struct.pack('<d', temp)
-        w0, w1, w2, w3 = struct.unpack('<4H', packed100)
-        if w0 == 0 and w1 == 0 and w2 & 0xFFFC == w2:
-            # 34 lsb are 0
-            #print "float RK*100"
-            rk_encoded = 1 | (w3 << 16) | w2
-            return BIFFRecords.RKRecord(self.__parent.get_index(), self.__idx, self.__xf_idx, rk_encoded).get()
-
-        if abs(temp) < 0x40000000 and int(temp) == temp:
-            #print "30-bit integer RK*100"
-            rk_encoded = 3 | (int(temp) << 2)
-            return BIFFRecords.RKRecord(self.__parent.get_index(), self.__idx, self.__xf_idx, rk_encoded).get()
-
-        #print "Number" 
-        #print
-        return BIFFRecords.NumberRecord(self.__parent.get_index(), self.__idx, self.__xf_idx, self.__number).get()
-
-
-class MulNumberCell(object):
-    __slots__ = ["__init__", "get_biff_data"]
-
-    def __init__(self, parent, idx, xf_idx, sst_idx):
-        self.__parent = parent
-        self.__idx = idx
-        self.__xf_idx = xf_idx
-        self.__sst_idx = sst_idx
-
-
-    def get_biff_data(self):
-        raise Exception
-
-
-class FormulaCell(object):
-    __slots__ = ["__init__", "get_biff_data",
-                "__parent", "__idx", "__xf_idx", "__frmla"]
-
-    def __init__(self, parent, idx, xf_idx, frmla):
-        self.__parent = parent
-        self.__idx = idx
-        self.__xf_idx = xf_idx
-        self.__frmla = frmla
-
-
-    def get_biff_data(self):
-        return BIFFRecords.FormulaRecord(self.__parent.get_index(), self.__idx, self.__xf_idx, self.__frmla.rpn()).get()
-
-
-

config/softs/pyExcelerator-0.6.3a.patched/pyExcelerator/Column.py

@@ -1,73 +0,0 @@
-#!/usr/bin/env python
-# -*- coding: windows-1251 -*-
-
-#  Copyright (C) 2005 Roman V. Kiseliov
-#  All rights reserved.
-# 
-#  Redistribution and use in source and binary forms, with or without
-#  modification, are permitted provided that the following conditions
-#  are met:
-# 
-#  1. Redistributions of source code must retain the above copyright
-#     notice, this list of conditions and the following disclaimer.
-# 
-#  2. Redistributions in binary form must reproduce the above copyright
-#     notice, this list of conditions and the following disclaimer in
-#     the documentation and/or other materials provided with the
-#     distribution.
-# 
-#  3. All advertising materials mentioning features or use of this
-#     software must display the following acknowledgment:
-#     "This product includes software developed by
-#      Roman V. Kiseliov <roman@kiseliov.ru>."
-# 
-#  4. Redistributions of any form whatsoever must retain the following
-#     acknowledgment:
-#     "This product includes software developed by
-#      Roman V. Kiseliov <roman@kiseliov.ru>."
-# 
-#  THIS SOFTWARE IS PROVIDED BY Roman V. Kiseliov ``AS IS'' AND ANY
-#  EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-#  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-#  PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL Roman V. Kiseliov OR
-#  ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-#  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-#  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-#  HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-#  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-#  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
-#  OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-__rev_id__ = """$Id: Column.py,v 1.4 2005/07/20 07:24:11 rvk Exp $"""
-
-
-from BIFFRecords import ColInfoRecord
-from Deco import *
-from Worksheet import Worksheet
-
-
-class Column(object):
-    #accepts(object, int, Worksheet)
-    def __init__(self, indx, parent_sheet):
-        self._index = indx
-        self._parent = parent_sheet
-        self._parent_wb = parent_sheet.get_parent()
-        self._xf_index = 0x0F
-        
-        self.width = 0x0B92
-        self.hidden = 0
-        self.level = 0
-        self.collapse = 0
-
-
-    def get_biff_record(self):
-        options =  (self.hidden & 0x01) << 0
-        options |= (self.level & 0x07) << 8
-        options |= (self.collapse & 0x01) << 12
-        
-        return ColInfoRecord(self._index, self._index, self.width, self._xf_index, options).get()
-        
-        
-        

config/softs/pyExcelerator-0.6.3a.patched/pyExcelerator/CompoundDoc.py

@@ -1,577 +0,0 @@
-#!/usr/bin/env python
-# -*- coding: windows-1251 -*-
-
-#  Copyright (C) 2005 Roman V. Kiseliov
-#  All rights reserved.
-# 
-#  Redistribution and use in source and binary forms, with or without
-#  modification, are permitted provided that the following conditions
-#  are met:
-# 
-#  1. Redistributions of source code must retain the above copyright
-#     notice, this list of conditions and the following disclaimer.
-# 
-#  2. Redistributions in binary form must reproduce the above copyright
-#     notice, this list of conditions and the following disclaimer in
-#     the documentation and/or other materials provided with the
-#     distribution.
-# 
-#  3. All advertising materials mentioning features or use of this
-#     software must display the following acknowledgment:
-#     "This product includes software developed by
-#      Roman V. Kiseliov <roman@kiseliov.ru>."
-# 
-#  4. Redistributions of any form whatsoever must retain the following
-#     acknowledgment:
-#     "This product includes software developed by
-#      Roman V. Kiseliov <roman@kiseliov.ru>."
-# 
-#  THIS SOFTWARE IS PROVIDED BY Roman V. Kiseliov ``AS IS'' AND ANY
-#  EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-#  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-#  PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL Roman V. Kiseliov OR
-#  ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-#  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-#  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-#  HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-#  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-#  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
-#  OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-import sys
-import struct
-
-
-
-__rev_id__ = """$Id: CompoundDoc.py,v 1.7 2005/10/26 07:44:24 rvk Exp $"""
-
-        
-class Reader:
-    def __init__(self, filename, dump = False, doc=None ): # XXX modif. Emmanuel
-        self.dump = dump
-        self.STREAMS = {}
-        if doc is None:
-            doc = file(filename, 'rb').read()
-        self.header, self.data = doc[0:512], doc[512:]
-        del doc
-
-        self.__build_header()
-        self.__build_MSAT()
-        self.__build_SAT()
-        self.__build_directory()
-        self.__build_short_sectors_data()
-        
-        if len(self.short_sectors_data) > 0:
-            self.__build_SSAT()
-        else:
-            if self.dump and (self.total_ssat_sectors != 0 or self.ssat_start_sid != -2):
-                print 'NOTE: header says that must be', self.total_ssat_sectors, 'short sectors'
-                print 'NOTE: starting at', self.ssat_start_sid, 'sector'
-                print 'NOTE: but file does not contains data in short sectors'
-            self.ssat_start_sid = -2
-            self.total_ssat_sectors = 0
-            self.SSAT = [-2]
-
-        for dentry in self.dir_entry_list[1:]:
-            (did, 
-             sz, name, 
-             t, c, 
-             did_left, did_right, did_root, 
-             dentry_start_sid, 
-             stream_size
-            ) = dentry
-            stream_data = ''
-            if stream_size > 0:
-                if stream_size >= self.min_stream_size:
-                    args = (self.data, self.SAT, dentry_start_sid, self.sect_size)
-                else:
-                    args = (self.short_sectors_data, self.SSAT, dentry_start_sid, self.short_sect_size)
-                stream_data = self.get_stream_data(*args)
-
-            if name != '':
-                # BAD IDEA: names may be equal. NEED use full paths...
-                self.STREAMS[name] = stream_data
-
-    
-    def __build_header(self):
-        self.doc_magic             = self.header[0:8]
-
-        if self.doc_magic != '\xD0\xCF\x11\xE0\xA1\xB1\x1A\xE1':
-            raise Exception, 'Not an OLE file.'
-
-        self.file_uid              = self.header[8:24]
-        self.rev_num               = self.header[24:26]
-        self.ver_num               = self.header[26:28]
-        self.byte_order            = self.header[28:30]
-        self.log2_sect_size,       = struct.unpack('<H', self.header[30:32])
-        self.log2_short_sect_size, = struct.unpack('<H', self.header[32:34])
-        self.total_sat_sectors,    = struct.unpack('<L', self.header[44:48])
-        self.dir_start_sid,        = struct.unpack('<l', self.header[48:52])
-        self.min_stream_size,      = struct.unpack('<L', self.header[56:60])
-        self.ssat_start_sid,       = struct.unpack('<l', self.header[60:64])
-        self.total_ssat_sectors,   = struct.unpack('<L', self.header[64:68])
-        self.msat_start_sid,       = struct.unpack('<l', self.header[68:72])
-        self.total_msat_sectors,   = struct.unpack('<L', self.header[72:76])
-         
-        self.sect_size        = 1 << self.log2_sect_size
-        self.short_sect_size  = 1 << self.log2_short_sect_size
-
-        if self.dump:
-            print 'file magic: '
-            print_bin_data(self.doc_magic)
-
-            print 'file uid: '
-            print_bin_data(self.file_uid)
-
-            print 'revision number: '
-            print_bin_data(self.rev_num)
-         
-            print 'version number: '
-            print_bin_data(self.ver_num)
-            
-            print 'byte order: '
-            print_bin_data(self.byte_order)
-            
-            print 'sector size                                :', hex(self.sect_size), self.sect_size
-            #print 'total sectors in file                      :', hex(self.total_sectors), self.total_sectors
-            print 'short sector size                          :', hex(self.short_sect_size), self.short_sect_size
-            print 'Total number of sectors used for the SAT   :', hex(self.total_sat_sectors), self.total_sat_sectors
-            print 'SID of first sector of the directory stream:', hex(self.dir_start_sid), self.dir_start_sid
-            print 'Minimum size of a standard stream          :', hex(self.min_stream_size), self.min_stream_size
-            print 'SID of first sector of the SSAT            :', hex(self.ssat_start_sid), self.ssat_start_sid
-            print 'Total number of sectors used for the SSAT  :', hex(self.total_ssat_sectors), self.total_ssat_sectors
-            print 'SID of first additional sector of the MSAT :', hex(self.msat_start_sid), self.msat_start_sid
-            print 'Total number of sectors used for the MSAT  :', hex(self.total_msat_sectors), self.total_msat_sectors
-
-
-    def __build_MSAT(self):
-        self.MSAT = list(struct.unpack('<109l', self.header[76:]))
-        
-        next = self.msat_start_sid
-        while next > 0:
-           msat_sector = struct.unpack('<128l', self.data[next*self.sect_size:(next+1)*self.sect_size])
-           self.MSAT.extend(msat_sector[:127])
-           next = msat_sector[-1]
-
-        if self.dump:
-            print 'MSAT (header part): \n', self.MSAT[:109]
-            print 'additional MSAT sectors: \n', self.MSAT[109:]
-
-
-    def __build_SAT(self):
-        sat_stream = ''.join([self.data[i*self.sect_size:(i+1)*self.sect_size] for i in self.MSAT if i >= 0])
-
-        sat_sids_count = len(sat_stream) >> 2
-        self.SAT = struct.unpack('<%dl' % sat_sids_count, sat_stream) # SIDs tuple
-
-        if self.dump:
-            print 'SAT sid count:\n', sat_sids_count
-            print 'SAT content:\n', self.SAT
-
-
-    def __build_SSAT(self):
-        ssat_stream = self.get_stream_data(self.data, self.SAT, self.ssat_start_sid, self.sect_size)
-
-        ssids_count = len(ssat_stream) >> 2
-        self.SSAT = struct.unpack('<%dl' % ssids_count, ssat_stream)
-
-        if self.dump:
-            print 'SSID count:', ssids_count
-            print 'SSAT content:\n', self.SSAT
-
-
-    def __build_directory(self):
-        dir_stream = self.get_stream_data(self.data, self.SAT, self.dir_start_sid, self.sect_size)
-
-        self.dir_entry_list = []
-
-        i = 0
-        while i < len(dir_stream):
-            dentry = dir_stream[i:i+128] # 128 -- dir entry size
-            i += 128
-            
-            did = len(self.dir_entry_list)
-            sz, = struct.unpack('<H', dentry[64:66])
-            if sz > 0 :
-                name = dentry[0:sz-2].decode('utf_16_le', 'replace')
-            else:
-                name = u''
-            t,  = struct.unpack('B', dentry[66])
-            c,  = struct.unpack('B', dentry[67])
-            did_left ,  = struct.unpack('<l', dentry[68:72])
-            did_right ,  = struct.unpack('<l', dentry[72:76])
-            did_root ,  = struct.unpack('<l', dentry[76:80])
-            dentry_start_sid ,  = struct.unpack('<l', dentry[116:120])
-            stream_size ,  = struct.unpack('<L', dentry[120:124])
-
-            self.dir_entry_list.extend([(did, sz, name, t, c, 
-                                            did_left, did_right, did_root, 
-                                            dentry_start_sid, stream_size)]) 
-
-        if self.dump:
-            dentry_types = {
-                0x00: 'Empty',
-                0x01: 'User storage',
-                0x02: 'User stream',
-                0x03: 'LockBytes',
-                0x04: 'Property',
-                0x05: 'Root storage'
-            }
-            node_colours = {
-                0x00: 'Red',
-                0x01: 'Black'
-            }
-            print 'total directory entries:', len(self.dir_entry_list)
-
-            for dentry in self.dir_entry_list:
-                (did, sz, name, t, c, 
-                 did_left, did_right, did_root, 
-                 dentry_start_sid, stream_size) = dentry
-                print 'DID', did
-                print 'Size of the used area of the character buffer of the name:', sz
-                print 'dir entry name:', repr(name)
-                print 'type of entry:', t, dentry_types[t]
-                print 'entry colour:', c, node_colours[c]
-                print 'left child DID :', did_left
-                print 'right child DID:', did_right
-                print 'root DID       :', did_root
-                print 'start SID       :', dentry_start_sid
-                print 'stream size     :', stream_size
-                if stream_size == 0:
-                    print 'stream is empty'
-                elif stream_size >= self.min_stream_size:
-                    print 'stream stored as normal stream'
-                else:
-                    print 'stream stored as short-stream'
-
-    
-    def __build_short_sectors_data(self):
-        (did, sz, name, t, c, 
-         did_left, did_right, did_root, 
-         dentry_start_sid, stream_size) = self.dir_entry_list[0]
-        assert t == 0x05 # Short-Stream Container Stream (SSCS) resides in Root Storage
-        if stream_size == 0:
-            self.short_sectors_data = ''
-        else:
-            self.short_sectors_data = self.get_stream_data(self.data, self.SAT, dentry_start_sid, self.sect_size)
-
-
-    def get_stream_data(self, data, SAT, start_sid, sect_size):
-        sid = start_sid
-        chunks = [(sid, sid)]
-        stream_data = ''
-
-        while SAT[sid] >= 0:
-            next_in_chain = SAT[sid]
-            last_chunk_start, last_chunk_finish = chunks[-1]
-            if next_in_chain - last_chunk_finish <= 1:
-                chunks[-1] = last_chunk_start, next_in_chain
-            else:
-                chunks.extend([(next_in_chain, next_in_chain)]) 
-            sid = next_in_chain
-        for s, f in chunks:
-            stream_data += data[s*sect_size:(f+1)*sect_size]
-        #print chunks
-        return stream_data
-
-        
-def print_bin_data(data):
-    i = 0
-    while i < len(data):
-        j = 0
-        while (i < len(data)) and (j < 16):
-            c = '0x%02X' % ord(data[i])
-            sys.stdout.write(c)
-            sys.stdout.write(' ')
-            i += 1
-            j += 1
-        print
-    if i == 0:
-        print '<NO DATA>'
-
-
-
-# This implementation writes only 'Root Entry', 'Workbook' streams
-# and 2 empty streams for aligning directory stream on sector boundary
-# 
-# LAYOUT:
-# 0         header
-# 76                MSAT (1st part: 109 SID)
-# 512       workbook stream
-# ...       additional MSAT sectors if streams' size > about 7 Mb == (109*512 * 128)
-# ...       SAT
-# ...       directory stream
-#
-# NOTE: this layout is "ad hoc". It can be more general. RTFM
-
-class XlsDoc:
-    SECTOR_SIZE = 0x0200
-    MIN_LIMIT   = 0x1000
-
-    SID_FREE_SECTOR  = -1
-    SID_END_OF_CHAIN = -2
-    SID_USED_BY_SAT  = -3
-    SID_USED_BY_MSAT = -4
-
-    def __init__(self):
-        #self.book_stream = ''                # padded
-        self.book_stream_sect = []
-
-        self.dir_stream = ''
-        self.dir_stream_sect = []
-
-        self.packed_SAT = ''
-        self.SAT_sect = []
-
-        self.packed_MSAT_1st = ''
-        self.packed_MSAT_2nd = ''
-        self.MSAT_sect_2nd = []
-
-        self.header = ''
-
-    def __build_directory(self): # align on sector boundary
-        self.dir_stream = ''
-
-        dentry_name      = '\x00'.join('Root Entry\x00') + '\x00'
-        dentry_name_sz   = len(dentry_name)
-        dentry_name_pad  = '\x00'*(64 - dentry_name_sz)
-        dentry_type      = 0x05 # root storage
-        dentry_colour    = 0x01 # black
-        dentry_did_left  = -1
-        dentry_did_right = -1
-        dentry_did_root  = 1
-        dentry_start_sid = -2
-        dentry_stream_sz = 0
-
-        self.dir_stream += struct.pack('<64s H 2B 3l 9L l L L',
-           dentry_name + dentry_name_pad,
-           dentry_name_sz,
-           dentry_type,
-           dentry_colour,
-           dentry_did_left, 
-           dentry_did_right,
-           dentry_did_root,
-           0, 0, 0, 0, 0, 0, 0, 0, 0,
-           dentry_start_sid,
-           dentry_stream_sz,
-           0
-        )
-
-        dentry_name      = '\x00'.join('Workbook\x00') + '\x00'
-        dentry_name_sz   = len(dentry_name)
-        dentry_name_pad  = '\x00'*(64 - dentry_name_sz)
-        dentry_type      = 0x02 # user stream
-        dentry_colour    = 0x01 # black
-        dentry_did_left  = -1
-        dentry_did_right = -1
-        dentry_did_root  = -1
-        dentry_start_sid = 0     
-        dentry_stream_sz = self.book_stream_len
-
-        self.dir_stream += struct.pack('<64s H 2B 3l 9L l L L',
-           dentry_name + dentry_name_pad,
-           dentry_name_sz,
-           dentry_type,
-           dentry_colour,
-           dentry_did_left, 
-           dentry_did_right,
-           dentry_did_root,
-           0, 0, 0, 0, 0, 0, 0, 0, 0, 
-           dentry_start_sid,
-           dentry_stream_sz,
-           0
-        )
-        
-        # padding
-        dentry_name      = ''
-        dentry_name_sz   = len(dentry_name)
-        dentry_name_pad  = '\x00'*(64 - dentry_name_sz)
-        dentry_type      = 0x00 # empty
-        dentry_colour    = 0x01 # black
-        dentry_did_left  = -1
-        dentry_did_right = -1
-        dentry_did_root  = -1
-        dentry_start_sid = -2
-        dentry_stream_sz = 0
-
-        self.dir_stream += struct.pack('<64s H 2B 3l 9L l L L',
-           dentry_name + dentry_name_pad,
-           dentry_name_sz,
-           dentry_type,
-           dentry_colour,
-           dentry_did_left, 
-           dentry_did_right,
-           dentry_did_root,
-           0, 0, 0, 0, 0, 0, 0, 0, 0,
-           dentry_start_sid,
-           dentry_stream_sz,
-           0
-        ) * 2
-    
-    def __build_sat(self):
-        # Build SAT
-        book_sect_count = self.book_stream_len >> 9
-        dir_sect_count  = len(self.dir_stream) >> 9
-        
-        total_sect_count     = book_sect_count + dir_sect_count
-        SAT_sect_count       = 0
-        MSAT_sect_count      = 0
-        SAT_sect_count_limit = 109
-        while total_sect_count > 128*SAT_sect_count or SAT_sect_count > SAT_sect_count_limit:
-            SAT_sect_count   += 1
-            total_sect_count += 1
-            if SAT_sect_count > SAT_sect_count_limit:
-                MSAT_sect_count      += 1
-                total_sect_count     += 1
-                SAT_sect_count_limit += 127
-
-
-        SAT = [self.SID_FREE_SECTOR]*128*SAT_sect_count
-
-        sect = 0
-        while sect < book_sect_count - 1:
-            self.book_stream_sect.append(sect)
-            SAT[sect] = sect + 1
-            sect += 1
-        self.book_stream_sect.append(sect)
-        SAT[sect] = self.SID_END_OF_CHAIN
-        sect += 1
-
-        while sect < book_sect_count + MSAT_sect_count:
-            self.MSAT_sect_2nd.append(sect)
-            SAT[sect] = self.SID_USED_BY_MSAT
-            sect += 1
-
-        while sect < book_sect_count + MSAT_sect_count + SAT_sect_count:
-            self.SAT_sect.append(sect)            
-            SAT[sect] = self.SID_USED_BY_SAT
-            sect += 1
-
-        while sect < book_sect_count + MSAT_sect_count + SAT_sect_count + dir_sect_count - 1:
-            self.dir_stream_sect.append(sect)
-            SAT[sect] = sect + 1
-            sect += 1
-        self.dir_stream_sect.append(sect)
-        SAT[sect] = self.SID_END_OF_CHAIN
-        sect += 1
-
-        self.packed_SAT = struct.pack('<%dl' % (SAT_sect_count*128), *SAT)
-
-        MSAT_1st = [self.SID_FREE_SECTOR]*109
-        for i, SAT_sect_num in zip(range(0, 109), self.SAT_sect):
-            MSAT_1st[i] = SAT_sect_num
-        self.packed_MSAT_1st = struct.pack('<109l', *MSAT_1st)
-
-        MSAT_2nd = [self.SID_FREE_SECTOR]*128*MSAT_sect_count
-        if MSAT_sect_count > 0:
-            MSAT_2nd[- 1] = self.SID_END_OF_CHAIN
-
-        i = 109
-        msat_sect = 0
-        sid_num = 0
-        while i < SAT_sect_count:
-            if (sid_num + 1) % 128 == 0:
-                #print 'link: ',
-                msat_sect += 1
-                if msat_sect < len(self.MSAT_sect_2nd):
-                    MSAT_2nd[sid_num] = self.MSAT_sect_2nd[msat_sect]
-            else:
-                #print 'sid: ',
-                MSAT_2nd[sid_num] = self.SAT_sect[i]
-                i += 1
-            #print sid_num, MSAT_2nd[sid_num]
-            sid_num += 1
-
-        self.packed_MSAT_2nd = struct.pack('<%dl' % (MSAT_sect_count*128), *MSAT_2nd)
-
-        #print vars()
-        #print zip(range(0, sect), SAT)
-        #print self.book_stream_sect
-        #print self.MSAT_sect_2nd
-        #print MSAT_2nd
-        #print self.SAT_sect
-        #print self.dir_stream_sect
-
-
-    def __build_header(self):
-        doc_magic             = '\xD0\xCF\x11\xE0\xA1\xB1\x1A\xE1'
-        file_uid              = '\x00'*16
-        rev_num               = '\x3E\x00'
-        ver_num               = '\x03\x00'
-        byte_order            = '\xFE\xFF'
-        log_sect_size         = struct.pack('<H', 9)
-        log_short_sect_size   = struct.pack('<H', 6)
-        not_used0             = '\x00'*10
-        total_sat_sectors     = struct.pack('<L', len(self.SAT_sect))
-        dir_start_sid         = struct.pack('<l', self.dir_stream_sect[0])
-        not_used1             = '\x00'*4        
-        min_stream_size       = struct.pack('<L', 0x1000)
-        ssat_start_sid        = struct.pack('<l', -2)
-        total_ssat_sectors    = struct.pack('<L', 0)
-
-        if len(self.MSAT_sect_2nd) == 0:
-            msat_start_sid        = struct.pack('<l', -2)
-        else:
-            msat_start_sid        = struct.pack('<l', self.MSAT_sect_2nd[0])
-
-        total_msat_sectors    = struct.pack('<L', len(self.MSAT_sect_2nd))
-
-        self.header =       ''.join([  doc_magic,
-                                        file_uid,
-                                        rev_num,
-                                        ver_num,
-                                        byte_order,
-                                        log_sect_size,
-                                        log_short_sect_size,
-                                        not_used0,
-                                        total_sat_sectors,
-                                        dir_start_sid,
-                                        not_used1,
-                                        min_stream_size,
-                                        ssat_start_sid,
-                                        total_ssat_sectors,
-                                        msat_start_sid,
-                                        total_msat_sectors
-                                    ])
-                                        
-
-    def save(self, filename, stream):
-        # 1. Align stream on 0x1000 boundary (and therefore on sector boundary)
-        padding = '\x00' * (0x1000 - (len(stream) % 0x1000))
-        self.book_stream_len = len(stream) + len(padding)
-
-        self.__build_directory()
-        self.__build_sat()
-        self.__build_header()
-        
-        f = file(filename, 'wb')
-        f.write(self.header)
-        f.write(self.packed_MSAT_1st)
-        f.write(stream)
-        f.write(padding)
-        f.write(self.packed_MSAT_2nd)
-        f.write(self.packed_SAT)
-        f.write(self.dir_stream)
-        f.close()
-
-    def savetostr(self, stream): # XXX added by Emmanuel
-        # 1. Align stream on 0x1000 boundary (and therefore on sector boundary)
-        padding = '\x00' * (0x1000 - (len(stream) % 0x1000))
-        self.book_stream_len = len(stream) + len(padding)
-
-        self.__build_directory()
-        self.__build_sat()
-        self.__build_header()
-        
-        return self.header+self.packed_MSAT_1st+stream+padding+self.packed_MSAT_2nd+self.packed_SAT+self.dir_stream
-
-if __name__ == '__main__':
-    d = XlsDoc()
-    d.save('a.aaa', 'b'*17000)
-
-
-
-
-

config/softs/pyExcelerator-0.6.3a.patched/pyExcelerator/Deco.py

@@ -1,61 +0,0 @@
-# This code from 
-
-# PEP: 318 
-# Title: Decorators for Functions and Methods 
-# Version: 1.35 
-# Last-Modified: 2004/09/14 07:34:23 
-# Author: Kevin D. Smith, Jim Jewett, Skip Montanaro, Anthony Baxter 
-
-# This code fixes error in example 4: 
-# authors' code contains
-#       @accepts(int, (int,float))
-#       @returns((int,float))
-#       def func(arg1, arg2):
-#           return arg1 * arg2
-# 
-# It should be:
-#       @returns((int,float))
-#       @accepts(int, (int,float))
-#       def func(arg1, arg2):
-#           return arg1 * arg2
-# because of decorators are applied from bottom to up.
-
-
-__rev_id__ = """$Id: Deco.py,v 1.4 2005/07/20 07:24:11 rvk Exp $"""
-
-
-def accepts(*types):
-    #print types
-    def check_accepts(f):
-        assert len(types) == f.func_code.co_argcount
-        def new_f(*args, **kwds):
-            for (a, t) in zip(args, types):
-                assert isinstance(a, t), \
-                       "arg %r does not match %s" % (a,t)
-            return f(*args, **kwds)
-        new_f.func_name = f.func_name
-        return new_f
-    return check_accepts
-
-def returns(rtype):
-    def check_returns(f):
-        def new_f(*args, **kwds):
-            result = f(*args, **kwds)
-            assert isinstance(result, rtype), \
-                   "return value %r does not match %s" % (result,rtype)
-            return result
-        new_f.func_name = f.func_name
-        return new_f
-    return check_returns
-
-
-if __name__ == '__main__':
-    import types 
-
-##    @returns(types.NoneType)
-##    @accepts(int, (int,float))
-    def func(arg1, arg2):
-        #return str(arg1 * arg2)
-        pass
-
-    func(1, 2)      

config/softs/pyExcelerator-0.6.3a.patched/pyExcelerator/ExcelFormula.py

@@ -1,76 +0,0 @@
-#!/usr/bin/env python
-# -*- coding: windows-1251 -*-
-
-#  Copyright (C) 2005 Roman V. Kiseliov
-#  All rights reserved.
-# 
-#  Redistribution and use in source and binary forms, with or without
-#  modification, are permitted provided that the following conditions
-#  are met:
-# 
-#  1. Redistributions of source code must retain the above copyright
-#     notice, this list of conditions and the following disclaimer.
-# 
-#  2. Redistributions in binary form must reproduce the above copyright
-#     notice, this list of conditions and the following disclaimer in
-#     the documentation and/or other materials provided with the
-#     distribution.
-# 
-#  3. All advertising materials mentioning features or use of this
-#     software must display the following acknowledgment:
-#     "This product includes software developed by
-#      Roman V. Kiseliov <roman@kiseliov.ru>."
-# 
-#  4. Redistributions of any form whatsoever must retain the following
-#     acknowledgment:
-#     "This product includes software developed by
-#      Roman V. Kiseliov <roman@kiseliov.ru>."
-# 
-#  THIS SOFTWARE IS PROVIDED BY Roman V. Kiseliov ``AS IS'' AND ANY
-#  EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-#  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-#  PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL Roman V. Kiseliov OR
-#  ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-#  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-#  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-#  HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-#  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-#  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
-#  OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-__rev_id__ = """$Id: ExcelFormula.py,v 1.3 2005/08/11 08:53:48 rvk Exp $"""
-
-
-import ExcelFormulaParser, ExcelFormulaLexer
-import struct
-from antlr import ANTLRException
-
-
-class Formula(object):
-    __slots__ = ["__init__", "text", "rpn", "__s", "__parser"]
-
-
-    def __init__(self, s):
-        try:
-            self.__s = s
-            lexer = ExcelFormulaLexer.Lexer(s)
-            self.__parser = ExcelFormulaParser.Parser(lexer)
-            self.__parser.formula()
-        except ANTLRException:
-            raise Exception, "can't parse formula " + s
-
-    def text(self):
-        return self.__s
-
-    def rpn(self):
-        '''
-        Offset    Size    Contents
-        0         2       Size of the following formula data (sz)
-        2         sz      Formula data (RPN token array)
-        [2+sz]    var.    (optional) Additional data for specific tokens
-
-        '''
-        return struct.pack("<H", len(self.__parser.rpn)) + self.__parser.rpn
-

config/softs/pyExcelerator-0.6.3a.patched/pyExcelerator/ExcelFormulaLexer.py

@@ -1,158 +0,0 @@
-#!/usr/bin/env python
-# -*- coding: windows-1251 -*-
-
-#  Copyright (C) 2005 Roman V. Kiseliov
-#  All rights reserved.
-#
-#  Redistribution and use in source and binary forms, with or without
-#  modification, are permitted provided that the following conditions
-#  are met:
-#
-#  1. Redistributions of source code must retain the above copyright
-#     notice, this list of conditions and the following disclaimer.
-#
-#  2. Redistributions in binary form must reproduce the above copyright
-#     notice, this list of conditions and the following disclaimer in
-#     the documentation and/or other materials provided with the
-#     distribution.
-#
-#  3. All advertising materials mentioning features or use of this
-#     software must display the following acknowledgment:
-#     "This product includes software developed by
-#      Roman V. Kiseliov <roman@kiseliov.ru>."
-#
-#  4. Redistributions of any form whatsoever must retain the following
-#     acknowledgment:
-#     "This product includes software developed by
-#      Roman V. Kiseliov <roman@kiseliov.ru>."
-#
-#  THIS SOFTWARE IS PROVIDED BY Roman V. Kiseliov ``AS IS'' AND ANY
-#  EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-#  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-#  PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL Roman V. Kiseliov OR
-#  ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-#  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-#  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-#  HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-#  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-#  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
-#  OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-__rev_id__ = """$Id: ExcelFormulaLexer.py,v 1.4 2005/08/14 06:40:23 rvk Exp $"""
-
-
-import sys
-from antlr import EOF, CommonToken as Tok, TokenStream, TokenStreamException
-import struct
-import ExcelFormulaParser
-from re import compile as recompile, match, LOCALE, UNICODE, IGNORECASE
-
-
-int_const_pattern = recompile(r"\d+")
-flt_const_pattern = recompile(r"\d*\.\d+(?:[Ee][+-]?\d+)?")
-str_const_pattern = recompile(r'["][^"]*["]')
-#range2d_pattern   = recompile(r"\$?[A-I]?[A-Z]\$?\d+:\$?[A-I]?[A-Z]\$?\d+")
-ref2d_pattern     = recompile(r"\$?[A-I]?[A-Z]\$?\d+")
-true_pattern      = recompile(r"TRUE", IGNORECASE)
-false_pattern     = recompile(r"FALSE", IGNORECASE)
-name_pattern      = recompile(r"[\.\w]+", LOCALE)
-
-pattern_type_tuples = (
-    (flt_const_pattern, ExcelFormulaParser.NUM_CONST),
-    (int_const_pattern, ExcelFormulaParser.INT_CONST),
-    (str_const_pattern, ExcelFormulaParser.STR_CONST),
-#    (range2d_pattern  , ExcelFormulaParser.RANGE2D),
-    (ref2d_pattern    , ExcelFormulaParser.REF2D),
-    (true_pattern     , ExcelFormulaParser.TRUE_CONST),
-    (false_pattern    , ExcelFormulaParser.FALSE_CONST),
-    (name_pattern     , ExcelFormulaParser.NAME)
-)
-
-
-type_text_tuples = (
-    (ExcelFormulaParser.NE, '<>'),
-    (ExcelFormulaParser.LE, '<='),
-    (ExcelFormulaParser.GE, '>='),
-    (ExcelFormulaParser.EQ, '='),
-    (ExcelFormulaParser.LT, '<'),
-    (ExcelFormulaParser.GT, '>'),
-    (ExcelFormulaParser.ADD, '+'),
-    (ExcelFormulaParser.SUB, '-'),
-    (ExcelFormulaParser.MUL, '*'),
-    (ExcelFormulaParser.DIV, '/'),
-    (ExcelFormulaParser.COLON, ':'),
-    (ExcelFormulaParser.SEMICOLON, ';'),
-    (ExcelFormulaParser.COMMA, ','),
-    (ExcelFormulaParser.LP, '('),
-    (ExcelFormulaParser.RP, ')'),
-    (ExcelFormulaParser.CONCAT, '&'),
-    (ExcelFormulaParser.PERCENT, '%'),
-    (ExcelFormulaParser.POWER, '^')
-)
-
-
-class Lexer(TokenStream):
-    def __init__(self, text):
-        self._text = text[:]
-        self._pos = 0
-        self._line = 0
-
-
-    def isEOF(self):
-        return len(self._text) <= self._pos
-
-
-    def curr_ch(self):
-        return self._text[self._pos]
-
-
-    def next_ch(self, n = 1):
-        self._pos += n
-
-
-    def is_whitespace(self):
-        return self.curr_ch() in " \t\n\r\f\v"
-
-
-    def match_pattern(self, pattern, toktype):
-        m = pattern.match(self._text[self._pos:])
-        if m:
-            start_pos = self._pos + m.start(0)
-            end_pos = self._pos + m.end(0)
-            tt = self._text[start_pos:end_pos]
-            self._pos = end_pos
-            return Tok(type = toktype, text = tt, col = start_pos + 1)
-        else:
-            return None
-
-
-    def nextToken(self):
-        # skip whitespace
-        while not self.isEOF() and self.is_whitespace():
-            self.next_ch()
-        if self.isEOF():
-            return Tok(type = EOF)
-        # first, try to match token with more chars
-        for ptt in pattern_type_tuples:
-            t = self.match_pattern(*ptt);
-            if t:
-                return t
-        # second, we want find short tokens
-        for ty, te in type_text_tuples:
-            if self.curr_ch() == te:
-                self.next_ch()
-                return Tok(type = ty, text = te, col = self._pos)
-        # at this point, smth strange is happened
-        raise TokenStreamException("Unknown char %s at %u col." % (self.curr_ch(), self._pos))
-
-
-if __name__ == '__main__' :
-    import locale
-    locale.setlocale(locale.LC_ALL, 'russian')
-    try:
-        for t in Lexer('1+2+3+67.8678 + " @##$$$ klhkh kljhklhkl " + .58e-678*A1:B4 - 1lkjljlkjl3535ïîðïîð'):
-            print t
-    except TokenStreamException, e:
-        print "error:", e

config/softs/pyExcelerator-0.6.3a.patched/pyExcelerator/ExcelFormulaParser.py

@@ -1,457 +0,0 @@
-### $ANTLR 2.7.5 (20050128): "excel-formula.g" -> "ExcelFormulaParser.py"$
-### import antlr and other modules ..
-import sys
-import antlr
-
-version = sys.version.split()[0]
-if version < '2.2.1':
-    False = 0
-if version < '2.3':
-    True = not False
-### header action >>> 
-__rev_id__ = """$Id: ExcelFormulaParser.py,v 1.4 2005/08/14 06:40:23 rvk Exp $"""
-
-import struct
-import Utils
-from UnicodeUtils import upack1
-from ExcelMagic import *
-### header action <<< 
-### preamble action>>>
-
-### preamble action <<<
-
-### import antlr.Token 
-from antlr import Token
-### >>>The Known Token Types <<<
-SKIP                = antlr.SKIP
-INVALID_TYPE        = antlr.INVALID_TYPE
-EOF_TYPE            = antlr.EOF_TYPE
-EOF                 = antlr.EOF
-NULL_TREE_LOOKAHEAD = antlr.NULL_TREE_LOOKAHEAD
-MIN_USER_TYPE       = antlr.MIN_USER_TYPE
-TRUE_CONST = 4
-FALSE_CONST = 5
-STR_CONST = 6
-NUM_CONST = 7
-INT_CONST = 8
-NAME = 9
-EQ = 10
-NE = 11
-GT = 12
-LT = 13
-GE = 14
-LE = 15
-ADD = 16
-SUB = 17
-MUL = 18
-DIV = 19
-POWER = 20
-PERCENT = 21
-LP = 22
-RP = 23
-LB = 24
-RB = 25
-COLON = 26
-COMMA = 27
-SEMICOLON = 28
-CONCAT = 29
-REF2D = 30
-
-class Parser(antlr.LLkParser):
-    ### user action >>>
-    ### user action <<<
-    
-    def __init__(self, *args, **kwargs):
-        antlr.LLkParser.__init__(self, *args, **kwargs)
-        self.tokenNames = _tokenNames
-        ### __init__ header action >>> 
-        self.rpn = ""
-        ### __init__ header action <<< 
-        
-    def formula(self):    
-        
-        pass
-        self.expr("V")
-    
-    def expr(self,
-        arg_type
-    ):    
-        
-        pass
-        self.prec0_expr(arg_type)
-        while True:
-            if ((self.LA(1) >= EQ and self.LA(1) <= LE)):
-                pass
-                la1 = self.LA(1)
-                if False:
-                    pass
-                elif la1 and la1 in [EQ]:
-                    pass
-                    self.match(EQ)
-                    op = struct.pack('B', ptgEQ)
-                elif la1 and la1 in [NE]:
-                    pass
-                    self.match(NE)
-                    op = struct.pack('B', ptgNE)
-                elif la1 and la1 in [GT]:
-                    pass
-                    self.match(GT)
-                    op = struct.pack('B', ptgGE)
-                elif la1 and la1 in [LT]:
-                    pass
-                    self.match(LT)
-                    op = struct.pack('B', ptgLT)
-                elif la1 and la1 in [GE]:
-                    pass
-                    self.match(GE)
-                    op = struct.pack('B', ptgGE)
-                elif la1 and la1 in [LE]:
-                    pass
-                    self.match(LE)
-                    op = struct.pack('B', ptgLE)
-                else:
-                        raise antlr.NoViableAltException(self.LT(1), self.getFilename())
-                    
-                self.prec0_expr(arg_type)
-                self.rpn += op
-            else:
-                break
-            
-    
-    def prec0_expr(self,
-        arg_type
-    ):    
-        
-        pass
-        self.prec1_expr(arg_type)
-        while True:
-            if (self.LA(1)==CONCAT):
-                pass
-                pass
-                self.match(CONCAT)
-                op = struct.pack('B', ptgConcat)
-                self.prec1_expr(arg_type)
-                self.rpn += op
-            else:
-                break
-            
-    
-    def prec1_expr(self,
-        arg_type
-    ):    
-        
-        pass
-        self.prec2_expr(arg_type)
-        while True:
-            if (self.LA(1)==ADD or self.LA(1)==SUB):
-                pass
-                la1 = self.LA(1)
-                if False:
-                    pass
-                elif la1 and la1 in [ADD]:
-                    pass
-                    self.match(ADD)
-                    op = struct.pack('B', ptgAdd)
-                elif la1 and la1 in [SUB]:
-                    pass
-                    self.match(SUB)
-                    op = struct.pack('B', ptgSub)
-                else:
-                        raise antlr.NoViableAltException(self.LT(1), self.getFilename())
-                    
-                self.prec2_expr(arg_type)
-                self.rpn += op
-            else:
-                break
-            
-    
-    def prec2_expr(self,
-        arg_type
-    ):    
-        
-        pass
-        self.prec3_expr(arg_type)
-        while True:
-            if (self.LA(1)==MUL or self.LA(1)==DIV):
-                pass
-                la1 = self.LA(1)
-                if False:
-                    pass
-                elif la1 and la1 in [MUL]:
-                    pass
-                    self.match(MUL)
-                    op = struct.pack('B', ptgMul)
-                elif la1 and la1 in [DIV]:
-                    pass
-                    self.match(DIV)
-                    op = struct.pack('B', ptgDiv)
-                else:
-                        raise antlr.NoViableAltException(self.LT(1), self.getFilename())
-                    
-                self.prec3_expr(arg_type)
-                self.rpn += op
-            else:
-                break
-            
-    
-    def prec3_expr(self,
-        arg_type
-    ):    
-        
-        pass
-        self.prec4_expr(arg_type)
-        while True:
-            if (self.LA(1)==POWER):
-                pass
-                pass
-                self.match(POWER)
-                op = struct.pack('B', ptgPower)
-                self.prec4_expr(arg_type)
-                self.rpn += op
-            else:
-                break
-            
-    
-    def prec4_expr(self,
-        arg_type
-    ):    
-        
-        pass
-        self.prec5_expr(arg_type)
-        la1 = self.LA(1)
-        if False:
-            pass
-        elif la1 and la1 in [PERCENT]:
-            pass
-            self.match(PERCENT)
-            self.rpn += struct.pack('B', ptgPercent)
-        elif la1 and la1 in [EOF,EQ,NE,GT,LT,GE,LE,ADD,SUB,MUL,DIV,POWER,RP,SEMICOLON,CONCAT]:
-            pass
-        else:
-                raise antlr.NoViableAltException(self.LT(1), self.getFilename())
-            
-    
-    def prec5_expr(self,
-        arg_type
-    ):    
-        
-        la1 = self.LA(1)
-        if False:
-            pass
-        elif la1 and la1 in [TRUE_CONST,FALSE_CONST,STR_CONST,NUM_CONST,INT_CONST,NAME,LP,REF2D]:
-            pass
-            self.primary(arg_type)
-        elif la1 and la1 in [SUB]:
-            pass
-            self.match(SUB)
-            self.primary(arg_type)
-            self.rpn += struct.pack('B', ptgUminus)
-        else:
-                raise antlr.NoViableAltException(self.LT(1), self.getFilename())
-            
-    
-    def primary(self,
-        arg_type
-    ):    
-        
-        str_tok = None
-        int_tok = None
-        num_tok = None
-        ref2d_tok = None
-        ref2d1_tok = None
-        ref2d2_tok = None
-        name_tok = None
-        func_tok = None
-        la1 = self.LA(1)
-        if False:
-            pass
-        elif la1 and la1 in [TRUE_CONST]:
-            pass
-            self.match(TRUE_CONST)
-            self.rpn += struct.pack("2B", ptgBool, 1)
-        elif la1 and la1 in [FALSE_CONST]:
-            pass
-            self.match(FALSE_CONST)
-            self.rpn += struct.pack("2B", ptgBool, 0)
-        elif la1 and la1 in [STR_CONST]:
-            pass
-            str_tok = self.LT(1)
-            self.match(STR_CONST)
-            self.rpn += struct.pack("B", ptgStr) + upack1(str_tok.text[1:-1])
-        elif la1 and la1 in [INT_CONST]:
-            pass
-            int_tok = self.LT(1)
-            self.match(INT_CONST)
-            self.rpn += struct.pack("<BH", ptgInt, int(int_tok.text))
-        elif la1 and la1 in [NUM_CONST]:
-            pass
-            num_tok = self.LT(1)
-            self.match(NUM_CONST)
-            self.rpn += struct.pack("<Bd", ptgNum, float(num_tok.text))
-        elif la1 and la1 in [LP]:
-            pass
-            self.match(LP)
-            self.expr(arg_type)
-            self.match(RP)
-            self.rpn += struct.pack("B", ptgParen)
-        else:
-            if (self.LA(1)==REF2D) and (_tokenSet_0.member(self.LA(2))):
-                pass
-                ref2d_tok = self.LT(1)
-                self.match(REF2D)
-                r, c = Utils.cell_to_packed_rowcol(ref2d_tok.text)
-                if arg_type == "R":
-                   self.rpn += struct.pack("<B2H", ptgRefR, r, c)
-                else:
-                   self.rpn += struct.pack("<B2H", ptgRefV, r, c)
-            elif (self.LA(1)==REF2D) and (self.LA(2)==COLON):
-                pass
-                ref2d1_tok = self.LT(1)
-                self.match(REF2D)
-                self.match(COLON)
-                ref2d2_tok = self.LT(1)
-                self.match(REF2D)
-                r1, c1 = Utils.cell_to_packed_rowcol(ref2d1_tok.text)
-                r2, c2 = Utils.cell_to_packed_rowcol(ref2d2_tok.text)
-                if arg_type == "R":
-                   self.rpn += struct.pack("<B4H", ptgAreaR, r1, r2, c1, c2)
-                else:
-                   self.rpn += struct.pack("<B4H", ptgAreaV, r1, r2, c1, c2)
-            elif (self.LA(1)==NAME) and (_tokenSet_0.member(self.LA(2))):
-                pass
-                name_tok = self.LT(1)
-                self.match(NAME)
-                self.rpn += ""
-            elif (self.LA(1)==NAME) and (self.LA(2)==LP):
-                pass
-                func_tok = self.LT(1)
-                self.match(NAME)
-                if func_tok.text.upper() in std_func_by_name:
-                   (opcode,
-                   min_argc,
-                   max_argc,
-                   func_type,
-                   arg_type_list,
-                   volatile_func) = std_func_by_name[func_tok.text.upper()]
-                else:
-                   raise Exception, "unknown function: %s" % func_tok.text
-                self.match(LP)
-                arg_count=self.expr_list(arg_type_list, min_argc, max_argc)
-                self.match(RP)
-                if arg_count > max_argc or arg_count < min_argc:
-                   raise Exception, "%d parameters for function: %s" % (arg_count, func_tok.text)
-                if min_argc == max_argc:
-                   if func_type == "V":
-                       func_ptg = ptgFuncV
-                   elif func_type == "R":
-                       func_ptg = ptgFuncR
-                   elif func_type == "A":
-                       func_ptg = ptgFuncA
-                   else:
-                       raise Exception, "wrong function type"
-                   self.rpn += struct.pack("<BH", func_ptg, opcode)
-                else:
-                   if func_type == "V":
-                       func_ptg = ptgFuncVarV
-                   elif func_type == "R":
-                       func_ptg = ptgFuncVarR
-                   elif func_type == "A":
-                       func_ptg = ptgFuncVarA
-                   else:
-                       raise Exception, "wrong function type"
-                   self.rpn += struct.pack("<2BH", func_ptg, arg_count, opcode)
-            else:
-                raise antlr.NoViableAltException(self.LT(1), self.getFilename())
-            
-    
-    def expr_list(self,
-        arg_type_list, min_argc, max_argc
-    ):    
-        arg_cnt = None
-        
-        arg_cnt = 0
-        arg_type_list = arg_type_list.split()
-        arg_type = arg_type_list[arg_cnt]
-        la1 = self.LA(1)
-        if False:
-            pass
-        elif la1 and la1 in [TRUE_CONST,FALSE_CONST,STR_CONST,NUM_CONST,INT_CONST,NAME,SUB,LP,REF2D]:
-            pass
-            self.expr(arg_type)
-            arg_cnt += 1
-            while True:
-                if (self.LA(1)==SEMICOLON):
-                    pass
-                    if arg_cnt < len(arg_type_list):
-                       arg_type = arg_type_list[arg_cnt]
-                    else:
-                       arg_type = arg_type_list[-1]
-                    if arg_type == "...":
-                       arg_type = arg_type_list[-2]
-                    self.match(SEMICOLON)
-                    la1 = self.LA(1)
-                    if False:
-                        pass
-                    elif la1 and la1 in [TRUE_CONST,FALSE_CONST,STR_CONST,NUM_CONST,INT_CONST,NAME,SUB,LP,REF2D]:
-                        pass
-                        self.expr(arg_type)
-                    elif la1 and la1 in [RP,SEMICOLON]:
-                        pass
-                        self.rpn += struct.pack("B", ptgMissArg)
-                    else:
-                            raise antlr.NoViableAltException(self.LT(1), self.getFilename())
-                        
-                    arg_cnt += 1
-                else:
-                    break
-                
-        elif la1 and la1 in [RP]:
-            pass
-        else:
-                raise antlr.NoViableAltException(self.LT(1), self.getFilename())
-            
-        return arg_cnt
-    
-
-_tokenNames = [
-    "<0>", 
-    "EOF", 
-    "<2>", 
-    "NULL_TREE_LOOKAHEAD", 
-    "TRUE_CONST", 
-    "FALSE_CONST", 
-    "STR_CONST", 
-    "NUM_CONST", 
-    "INT_CONST", 
-    "NAME", 
-    "EQ", 
-    "NE", 
-    "GT", 
-    "LT", 
-    "GE", 
-    "LE", 
-    "ADD", 
-    "SUB", 
-    "MUL", 
-    "DIV", 
-    "POWER", 
-    "PERCENT", 
-    "LP", 
-    "RP", 
-    "LB", 
-    "RB", 
-    "COLON", 
-    "COMMA", 
-    "SEMICOLON", 
-    "CONCAT", 
-    "REF2D"
-]
-    
-
-### generate bit set
-def mk_tokenSet_0(): 
-    ### var1
-    data = [ 817888258L, 0L]
-    return data
-_tokenSet_0 = antlr.BitSet(mk_tokenSet_0())
-    

config/softs/pyExcelerator-0.6.3a.patched/pyExcelerator/Formatting.py

@@ -1,278 +0,0 @@
-#!/usr/bin/env python
-# -*- coding: windows-1251 -*-
-
-#  Copyright (C) 2005 Roman V. Kiseliov
-#  All rights reserved.
-# 
-#  Redistribution and use in source and binary forms, with or without
-#  modification, are permitted provided that the following conditions
-#  are met:
-# 
-#  1. Redistributions of source code must retain the above copyright
-#     notice, this list of conditions and the following disclaimer.
-# 
-#  2. Redistributions in binary form must reproduce the above copyright
-#     notice, this list of conditions and the following disclaimer in
-#     the documentation and/or other materials provided with the
-#     distribution.
-# 
-#  3. All advertising materials mentioning features or use of this
-#     software must display the following acknowledgment:
-#     "This product includes software developed by
-#      Roman V. Kiseliov <roman@kiseliov.ru>."
-# 
-#  4. Redistributions of any form whatsoever must retain the following
-#     acknowledgment:
-#     "This product includes software developed by
-#      Roman V. Kiseliov <roman@kiseliov.ru>."
-# 
-#  THIS SOFTWARE IS PROVIDED BY Roman V. Kiseliov ``AS IS'' AND ANY
-#  EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-#  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-#  PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL Roman V. Kiseliov OR
-#  ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-#  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-#  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-#  HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-#  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-#  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
-#  OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-
-'''
-The  XF  record is able to store explicit cell formatting attributes or the
-attributes  of  a cell style. Explicit formatting includes the reference to
-a  cell  style  XF  record. This allows to extend a defined cell style with
-some  explicit  attributes.  The  formatting  attributes  are  divided into
-6 groups:
-
-Group           Attributes
--------------------------------------
-Number format   Number format index (index to FORMAT record)
-Font            Font index (index to FONT record)
-Alignment       Horizontal and vertical alignment, text wrap, indentation, 
-                orientation/rotation, text direction
-Border          Border line styles and colours
-Background      Background area style and colours
-Protection      Cell locked, formula hidden
-
-For  each  group  a flag in the cell XF record specifies whether to use the
-attributes  contained  in  that  XF  record  or  in  the  referenced  style
-XF  record. In style XF records, these flags specify whether the attributes
-will  overwrite  explicit  cell  formatting  when  the  style is applied to
-a  cell. Changing a cell style (without applying this style to a cell) will
-change  all  cells which already use that style and do not contain explicit
-cell  attributes for the changed style attributes. If a cell XF record does
-not  contain  explicit  attributes  in a group (if the attribute group flag
-is not set), it repeats the attributes of its style XF record.
-
-'''
-
-__rev_id__ = """$Id: Formatting.py,v 1.4 2005/07/20 07:24:11 rvk Exp $"""
-
-
-import BIFFRecords
-
-class Font(object):
-    ESCAPEMENT_NONE         = 0x00
-    ESCAPEMENT_SUPERSCRIPT  = 0x01
-    ESCAPEMENT_SUBSCRIPT    = 0x02
-    
-    UNDERLINE_NONE          = 0x00
-    UNDERLINE_SINGLE        = 0x01
-    UNDERLINE_SINGLE_ACC    = 0x21
-    UNDERLINE_DOUBLE        = 0x02
-    UNDERLINE_DOUBLE_ACC    = 0x22
-    
-    FAMILY_NONE         = 0x00
-    FAMILY_ROMAN        = 0x01
-    FAMILY_SWISS        = 0x02
-    FAMILY_MODERN       = 0x03
-    FAMILY_SCRIPT       = 0x04
-    FAMILY_DECORARTIVE  = 0x05
-    
-    CHARSET_ANSI_LATIN          = 0x00
-    CHARSET_SYS_DEFAULT         = 0x01
-    CHARSET_SYMBOL              = 0x02
-    CHARSET_APPLE_ROMAN         = 0x4D
-    CHARSET_ANSI_JAP_SHIFT_JIS  = 0x80
-    CHARSET_ANSI_KOR_HANGUL     = 0x81
-    CHARSET_ANSI_KOR_JOHAB      = 0x82
-    CHARSET_ANSI_CHINESE_GBK    = 0x86
-    CHARSET_ANSI_CHINESE_BIG5   = 0x88
-    CHARSET_ANSI_GREEK          = 0xA1
-    CHARSET_ANSI_TURKISH        = 0xA2
-    CHARSET_ANSI_VIETNAMESE     = 0xA3
-    CHARSET_ANSI_HEBREW         = 0xB1
-    CHARSET_ANSI_ARABIC         = 0xB2
-    CHARSET_ANSI_BALTIC         = 0xBA
-    CHARSET_ANSI_CYRILLIC       = 0xCC
-    CHARSET_ANSI_THAI           = 0xDE
-    CHARSET_ANSI_LATIN_II       = 0xEE
-    CHARSET_OEM_LATIN_I         = 0xFF   
-    
-    def __init__(self):
-        # twip = 1/20 of a point = 1/1440 of a inch
-        # usually resolution == 96 pixels per 1 inch 
-        # (rarely 120 pixels per 1 inch or another one)
-        
-        self.height = 0x00C8 # 200: this is font with height 10 points
-        self.italic = False
-        self.struck_out = False
-        self.outline = False
-        self.shadow = False
-        self.colour_index = 0x7FFF
-        self.bold = False
-        self._weight = 0x0190 # 0x02BC gives bold font
-        self.escapement = self.ESCAPEMENT_NONE
-        self.underline = self.UNDERLINE_NONE
-        self.family = self.FAMILY_NONE
-        self.charset = self.CHARSET_ANSI_CYRILLIC       
-        self.name = 'Arial'
-                
-    def get_biff_record(self):
-        height = self.height
-        
-        options = 0x00
-        if self.bold:
-            options |= 0x01
-            self._weight = 0x02BC
-        if self.italic:
-            options |= 0x02
-        if self.underline != self.UNDERLINE_NONE:
-            options |= 0x04
-        if self.struck_out:
-            options |= 0x08
-        if self.outline:
-            options |= 0x010
-        if self.shadow:
-            options |= 0x020
-            
-        colour_index = self.colour_index 
-        weight = self._weight
-        escapement = self.escapement
-        underline = self.underline 
-        family = self.family 
-        charset = self.charset
-        name = self.name
-        
-        return BIFFRecords.FontRecord(height, options, colour_index, weight, escapement, 
-                    underline, family, charset, 
-                    name)
-
-class Alignment(object):
-    HORZ_GENERAL                = 0x00
-    HORZ_LEFT                   = 0x01
-    HORZ_CENTER                 = 0x02
-    HORZ_RIGHT                  = 0x03
-    HORZ_FILLED                 = 0x04
-    HORZ_JUSTIFIED              = 0x05 # BIFF4-BIFF8X
-    HORZ_CENTER_ACROSS_SEL      = 0x06 # Centred across selection (BIFF4-BIFF8X)
-    HORZ_DISTRIBUTED            = 0x07 # Distributed (BIFF8X)
-    
-    VERT_TOP                    = 0x00 
-    VERT_CENTER                 = 0x01
-    VERT_BOTTOM                 = 0x02
-    VERT_JUSTIFIED              = 0x03 # Justified (BIFF5-BIFF8X)
-    VERT_DISIRIBUTED            = 0x04 # Distributed (BIFF8X)
-
-    DIRECTION_GENERAL           = 0x00 # BIFF8X
-    DIRECTION_LR                = 0x01
-    DIRECTION_RL                = 0x02
-
-    ORIENTATION_NOT_ROTATED     = 0x00
-    ORIENTATION_STACKED         = 0x01
-    ORIENTATION_90_CC           = 0x02
-    ORIENTATION_90_CW           = 0x03
-
-    ROTATION_0_ANGLE            = 0x00
-    ROTATION_STACKED            = 0xFF
-    
-    WRAP_AT_RIGHT               = 0x01
-    NOT_WRAP_AT_RIGHT           = 0x00
-    
-    SHRINK_TO_FIT               = 0x01
-    NOT_SHRINK_TO_FIT           = 0x00       
-
-    def __init__(self):
-        self.horz = self.HORZ_GENERAL
-        self.vert = self.VERT_BOTTOM
-        self.dire = self.DIRECTION_GENERAL
-        self.orie = self.ORIENTATION_NOT_ROTATED
-        self.rota = self.ROTATION_0_ANGLE
-        self.wrap = self.NOT_WRAP_AT_RIGHT
-        self.shri = self.NOT_SHRINK_TO_FIT
-        self.inde = 0
-        self.merg = 0
-
-class Borders(object):
-    NO_LINE = 0x00
-    THIN    = 0x01
-    MEDIUM  = 0x02
-    DASHED  = 0x03
-    DOTTED  = 0x04
-    THICK   = 0x05
-    DOUBLE  = 0x06
-    HAIR    = 0x07
-    #The following for BIFF8
-    MEDIUM_DASHED               = 0x08
-    THIN_DASH_DOTTED            = 0x09
-    MEDIUM_DASH_DOTTED          = 0x0A
-    THIN_DASH_DOT_DOTTED        = 0x0B
-    MEDIUM_DASH_DOT_DOTTED      = 0x0C
-    SLANTED_MEDIUM_DASH_DOTTED  = 0x0D
-    
-    NEED_DIAG1      = 0x01
-    NEED_DIAG2      = 0x01
-    NO_NEED_DIAG1   = 0x00
-    NO_NEED_DIAG2   = 0x00
-
-    def __init__(self):
-        self.left   = self.NO_LINE
-        self.right  = self.NO_LINE
-        self.top    = self.NO_LINE
-        self.bottom = self.NO_LINE
-        self.diag   = self.NO_LINE
-
-        self.left_colour   = 0x40
-        self.right_colour  = 0x40
-        self.top_colour    = 0x40
-        self.bottom_colour = 0x40
-        self.diag_colour   = 0x40
-        
-        self.need_diag1 = self.NO_NEED_DIAG1
-        self.need_diag2 = self.NO_NEED_DIAG2
-
-class Pattern(object):
-    # patterns 0x00 - 0x12
-    NO_PATTERN      = 0x00 
-    SOLID_PATTERN   = 0x01 
-    
-    def __init__(self):
-        self.pattern = self.NO_PATTERN
-        self.pattern_fore_colour = 0x40
-        self.pattern_back_colour = 0x41
-        
-class Protection(object):
-    def __init__(self):
-        self.cell_locked = 1
-        self.formula_hidden = 0
-        
-        
-if __name__ == '__main__':
-    font0 = Font()
-    font0.name = 'Arial'
-    font1 = Font()
-    font1.name = 'Arial Cyr'
-    font2 = Font()
-    font2.name = 'Times New Roman'
-    font3 = Font()
-    font3.name = 'Courier New Cyr'
-    
-    for font, filename in [(font0, 'font0.bin'), (font1, 'font1.bin'), (font2, 'font2.bin'), (font3, 'font3.bin')]:
-        f = file(filename, 'wb')
-        f.write(font.get_biff_record().get_data())
-        f.close
-        

config/softs/pyExcelerator-0.6.3a.patched/pyExcelerator/ImportXLS.py

@@ -1,476 +0,0 @@
-#!/usr/bin/env python
-# -*- coding: windows-1251 -*-
-
-#  Copyright (C) 2005 Roman V. Kiseliov
-#  All rights reserved.
-# 
-#  Redistribution and use in source and binary forms, with or without
-#  modification, are permitted provided that the following conditions
-#  are met:
-# 
-#  1. Redistributions of source code must retain the above copyright
-#     notice, this list of conditions and the following disclaimer.
-# 
-#  2. Redistributions in binary form must reproduce the above copyright
-#     notice, this list of conditions and the following disclaimer in
-#     the documentation and/or other materials provided with the
-#     distribution.
-# 
-#  3. All advertising materials mentioning features or use of this
-#     software must display the following acknowledgment:
-#     "This product includes software developed by
-#      Roman V. Kiseliov <roman@kiseliov.ru>."
-# 
-#  4. Redistributions of any form whatsoever must retain the following
-#     acknowledgment:
-#     "This product includes software developed by
-#      Roman V. Kiseliov <roman@kiseliov.ru>."
-# 
-#  THIS SOFTWARE IS PROVIDED BY Roman V. Kiseliov ``AS IS'' AND ANY
-#  EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-#  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-#  PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL Roman V. Kiseliov OR
-#  ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-#  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-#  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-#  HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-#  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-#  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
-#  OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-__rev_id__ = """$Id: ImportXLS.py,v 1.6 2005/10/26 07:44:24 rvk Exp $"""
-
-
-import UnicodeUtils
-import CompoundDoc
-import ExcelMagic
-from struct import pack, unpack
-
-
-def parse_xls(filename, encoding = None, doc=None): # XXX added doc arg.
-    
-    ##########################################################################
-
-    def process_BOUNDSHEET(biff8, rec_data):
-        sheet_stream_pos, visibility, sheet_type = unpack('<I2B', rec_data[:6])
-        sheet_name = rec_data[6:]
-
-        if biff8:
-            chars_num, options = unpack('2B', sheet_name[:2])
-            
-            chars_start = 2
-            runs_num = 0
-            asian_phonetic_size = 0
-
-            result = ''
-
-            compressed = (options & 0x01) == 0
-            has_asian_phonetic = (options & 0x04) != 0
-            has_format_runs = (options & 0x08) != 0
-
-            if has_format_runs:
-                runs_num , = unpack('<H', sheet_name[chars_start:chars_start+2])
-                chars_start += 2
-            if has_asian_phonetic:
-                asian_phonetic_size , = unpack('<I', sheet_name[chars_start:chars_start+4])
-                chars_start += 4
-
-            if compressed:
-                chars_end = chars_start + chars_num
-                result = sheet_name[chars_start:chars_end].decode('latin_1', 'replace')
-            else:
-                chars_end = chars_start + 2*chars_num
-                result = sheet_name[chars_start:chars_end].decode('utf_16_le', 'replace')
-            
-            tail_size = 4*runs_num + asian_phonetic_size
-        else:
-            result = sheet_name[1:].decode(encoding, 'replace')
-        
-        return result
-
-
-    def unpack2str(biff8, label_name): # 2 bytes length str
-        if biff8:
-            chars_num, options = unpack('<HB', label_name[:3])
-            
-            chars_start = 3
-            runs_num = 0
-            asian_phonetic_size = 0
-
-            result = ''
-
-            compressed = (options & 0x01) == 0
-            has_asian_phonetic = (options & 0x04) != 0
-            has_format_runs = (options & 0x08) != 0
-
-            if has_format_runs:
-                runs_num , = unpack('<H', label_name[chars_start:chars_start+2])
-                chars_start += 2
-            if has_asian_phonetic:
-                asian_phonetic_size , = unpack('<I', label_name[chars_start:chars_start+4])
-                chars_start += 4
-
-            if compressed:
-                chars_end = chars_start + chars_num
-                result = label_name[chars_start:chars_end].decode('latin_1', 'replace')
-            else:
-                chars_end = chars_start + 2*chars_num
-                result = label_name[chars_start:chars_end].decode('utf_16_le', 'replace')
-            
-            tail_size = 4*runs_num + asian_phonetic_size
-        else:
-            result = label_name[2:].decode(encoding, 'replace')
-
-        return result
-
-
-    def process_LABEL(biff8, rec_data):
-        row_idx, col_idx, xf_idx = unpack('<3H', rec_data[:6])
-        label_name = rec_data[6:]
-        result = unpack2str(biff8, label_name)
-        return (row_idx, col_idx, result)
-
-
-    def process_LABELSST(rec_data):
-        row_idx, col_idx, xf_idx, sst_idx = unpack('<3HI', rec_data)
-        return (row_idx, col_idx, sst_idx)
-
-
-    def process_RSTRING(biff8, rec_data):
-        if biff8:
-            return process_LABEL(biff8, rec_data)
-        else:
-            row_idx, col_idx, xf_idx, length = unpack('<4H', rec_data[:8])
-            result = rec_data[8:8+length].decode(encoding, 'replace')
-
-        return (row_idx, col_idx, result)
-        
-
-    def decode_rk(encoded):
-        b0, b1, b2, b3 = unpack('4B', encoded)
-        is_multed_100 = (b0 & 0x01) != 0
-        is_integer = (b0 & 0x02) != 0
-
-        if is_integer:
-            result , = unpack('<i', encoded)
-            result >>= 2
-        else:
-            ieee754 = struct.pack('8B', 0, 0, 0, 0, b0 & 0xFC, b1, b2, b3)
-            result , = unpack('<d', ieee754)
-        if is_multed_100:
-            result /= 100.0
-        
-        return result
-
-
-    def process_RK(rec_data):
-        row_idx, col_idx, xf_idx, encoded = unpack('<3H4s', rec_data)
-        result = decode_rk(encoded)
-        return (row_idx, col_idx, result)
-
-
-    def process_MULRK(rec_data):
-        row_idx, first_col_idx = unpack('<2H', rec_data[:4])
-        last_col_idx , = unpack('<H', rec_data[-2:])
-        xf_rk_num = last_col_idx - first_col_idx + 1
-
-        results = []
-        for i in range(xf_rk_num):
-            xf_idx, encoded = unpack('<H4s', rec_data[4+6*i : 4+6*(i+1)])
-            results.append(decode_rk(encoded))
-
-        return zip([row_idx]*xf_rk_num, range(first_col_idx, last_col_idx+1), results)
-
-
-    def process_NUMBER(rec_data):
-        row_idx, col_idx, xf_idx, result = unpack('<3Hd', rec_data)
-        return (row_idx, col_idx, result)
-
-    
-    def process_SST(rec_data, sst_continues):
-        # 0x00FC
-        total_refs, total_str = unpack('<2I', rec_data[:8])
-        #print total_refs, str_num
-
-        pos = 8
-        curr_block = rec_data
-        curr_block_num = -1
-        curr_str_num = 0
-        SST = {}
-
-        while curr_str_num < total_str:
-            if pos >= len(curr_block):
-                curr_block_num += 1
-                curr_block = sst_continues[curr_block_num]
-                pos = 0
-
-            chars_num, options = unpack('<HB', curr_block[pos:pos+3])
-            #print chars_num, options
-            pos += 3
-
-            asian_phonetic_size = 0
-            runs_num = 0
-            has_asian_phonetic = (options & 0x04) != 0
-            has_format_runs = (options & 0x08) != 0
-            if has_format_runs:
-                runs_num , = unpack('<H', curr_block[pos:pos+2])
-                pos += 2
-            if has_asian_phonetic:
-                asian_phonetic_size , = unpack('<I', curr_block[pos:pos+4])
-                pos += 4
-
-            curr_char = 0
-            result = ''
-            while curr_char < chars_num:
-                if pos >= len(curr_block):
-                    curr_block_num += 1
-                    curr_block = sst_continues[curr_block_num]
-                    options = ord(curr_block[0])
-                    pos = 1
-                #print curr_block_num
-
-                compressed = (options & 0x01) == 0
-                if compressed:
-                    chars_end = pos + chars_num - curr_char
-                else:
-                    chars_end = pos + 2*(chars_num - curr_char)
-                #print compressed, has_asian_phonetic, has_format_runs
-
-                splitted = chars_end > len(curr_block)
-                if splitted:
-                    chars_end = len(curr_block)
-                #print splitted, curr_char, pos, chars_end, repr(curr_block[pos:chars_end])
-
-                if compressed:
-                    result += curr_block[pos:chars_end].decode('latin_1', 'replace')
-                else:
-                    result += curr_block[pos:chars_end].decode('utf_16_le', 'replace')
-
-                pos = chars_end
-                curr_char = len(result)
-            # end while
-
-            # TODO: handle spanning format runs over CONTINUE blocks ???
-            tail_size = 4*runs_num + asian_phonetic_size
-            if len(curr_block) < pos + tail_size:
-                pos = pos + tail_size - len(curr_block)
-                curr_block_num += 1
-                curr_block = sst_continues[curr_block_num]
-            else:
-                pos += tail_size
-
-            #print result.encode('cp866')
-
-            SST[curr_str_num] = result
-            curr_str_num += 1
-
-        return SST
-
-
-    #####################################################################################
-    
-    import struct
-
-    encodings = {
-        0x016F: 'ascii',     #ASCII
-        0x01B5: 'cp437',     #IBM PC CP-437 (US)
-        0x02D0: 'cp720',     #IBM PC CP-720 (OEM Arabic)
-        0x02E1: 'cp737',     #IBM PC CP-737 (Greek)
-        0x0307: 'cp775',     #IBM PC CP-775 (Baltic)
-        0x0352: 'cp850',     #IBM PC CP-850 (Latin I)
-        0x0354: 'cp852',     #IBM PC CP-852 (Latin II (Central European))
-        0x0357: 'cp855',     #IBM PC CP-855 (Cyrillic)
-        0x0359: 'cp857',     #IBM PC CP-857 (Turkish)
-        0x035A: 'cp858',     #IBM PC CP-858 (Multilingual Latin I with Euro)
-        0x035C: 'cp860',     #IBM PC CP-860 (Portuguese)
-        0x035D: 'cp861',     #IBM PC CP-861 (Icelandic)
-        0x035E: 'cp862',     #IBM PC CP-862 (Hebrew)
-        0x035F: 'cp863',     #IBM PC CP-863 (Canadian (French))
-        0x0360: 'cp864',     #IBM PC CP-864 (Arabic)
-        0x0361: 'cp865',     #IBM PC CP-865 (Nordic)
-        0x0362: 'cp866',     #IBM PC CP-866 (Cyrillic (Russian))
-        0x0365: 'cp869',     #IBM PC CP-869 (Greek (Modern))
-        0x036A: 'cp874',     #Windows CP-874 (Thai)
-        0x03A4: 'cp932',     #Windows CP-932 (Japanese Shift-JIS)
-        0x03A8: 'cp936',     #Windows CP-936 (Chinese Simplified GBK)
-        0x03B5: 'cp949',     #Windows CP-949 (Korean (Wansung))
-        0x03B6: 'cp950',     #Windows CP-950 (Chinese Traditional BIG5)
-        0x04B0: 'utf_16_le', #UTF-16 (BIFF8)
-        0x04E2: 'cp1250',    #Windows CP-1250 (Latin II) (Central European)
-        0x04E3: 'cp1251',    #Windows CP-1251 (Cyrillic)
-        0x04E4: 'cp1252',    #Windows CP-1252 (Latin I) (BIFF4-BIFF7)
-        0x04E5: 'cp1253',    #Windows CP-1253 (Greek)
-        0x04E6: 'cp1254',    #Windows CP-1254 (Turkish)
-        0x04E7: 'cp1255',    #Windows CP-1255 (Hebrew)
-        0x04E8: 'cp1256',    #Windows CP-1256 (Arabic)
-        0x04E9: 'cp1257',    #Windows CP-1257 (Baltic)
-        0x04EA: 'cp1258',    #Windows CP-1258 (Vietnamese)
-        0x0551: 'cp1361',    #Windows CP-1361 (Korean (Johab))
-        0x2710: 'mac_roman', #Apple Roman
-        0x8000: 'mac_roman', #Apple Roman
-        0x8001: 'cp1252'     #Windows CP-1252 (Latin I) (BIFF2-BIFF3)
-    }
-
-    biff8 = True
-    SST = {}
-    sheets = []
-    sheet_names = []
-    values = {}
-    ws_num = 0
-    BOFs = 0
-    EOFs = 0
-
-    # Inside MS Office document looks like filesystem
-    # We need extract stream named 'Workbook' or 'Book'
-    ole_streams = CompoundDoc.Reader(filename, doc=doc).STREAMS
-
-    if 'Workbook' in ole_streams:
-        workbook_stream = ole_streams['Workbook']
-    elif 'Book' in ole_streams:
-        workbook_stream = ole_streams['Book']
-    else:
-        raise Exception, 'No workbook stream in file.'
-
-    workbook_stream_len = len(workbook_stream)
-    stream_pos = 0
-    
-    # Excel's method of data storing is based on 
-    # ancient technology "TLV" (Type, Length, Value).
-    # In addition, if record size grows to some limit
-    # Excel writes CONTINUE records
-    while stream_pos < workbook_stream_len and EOFs <= ws_num:
-        rec_id, data_size = unpack('<2H', workbook_stream[stream_pos:stream_pos+4])
-        stream_pos += 4
-        
-        rec_data = workbook_stream[stream_pos:stream_pos+data_size]
-        stream_pos += data_size
-
-        if rec_id == 0x0809: # BOF
-            #print 'BOF', 
-            BOFs += 1
-            ver, substream_type = unpack('<2H', rec_data[:4])
-            if substream_type == 0x0005:
-                # workbook global substream
-                biff8 = ver >= 0x0600
-            elif substream_type == 0x0010:
-                # worksheet substream
-                pass
-            else: # skip chart stream or unknown stream
-            # stream offsets may be used from BOUNDSHEET record
-                rec_id, data_size = unpack('<2H', workbook_stream[stream_pos:stream_pos+4])
-                while rec_id != 0x000A: # EOF
-                    #print 'SST CONTINUE'
-                    stream_pos += 4
-                    stream_pos += data_size
-                    rec_id, data_size = unpack('<2H', workbook_stream[stream_pos:stream_pos+4])
-            #print 'BIFF8 == ', biff8
-        elif rec_id == 0x000A: # EOF
-            #print 'EOF'
-            if BOFs > 1:
-                sheets.extend([values])
-                values = {}
-            EOFs += 1
-        elif rec_id == 0x0042: # CODEPAGE
-            cp ,  = unpack('<H', rec_data)
-            #print 'CODEPAGE', hex(cp)
-            if not encoding:
-                encoding = encodings[cp]
-            #print encoding
-        elif rec_id == 0x0085: # BOUNDSHEET
-            #print 'BOUNDSHEET',
-            ws_num += 1
-            b = process_BOUNDSHEET(biff8, rec_data)
-            sheet_names.extend([b])
-            #print b.encode('cp866')
-        elif rec_id == 0x00FC: # SST
-            #print 'SST'
-            sst_data = rec_data
-            sst_continues = []
-            rec_id, data_size = unpack('<2H', workbook_stream[stream_pos:stream_pos+4])
-            while rec_id == 0x003C: # CONTINUE
-                #print 'SST CONTINUE'
-                stream_pos += 4
-                rec_data = workbook_stream[stream_pos:stream_pos+data_size]
-                sst_continues.extend([rec_data])
-                stream_pos += data_size
-                rec_id, data_size = unpack('<2H', workbook_stream[stream_pos:stream_pos+4])
-            SST = process_SST(sst_data, sst_continues)
-        elif rec_id == 0x00FD: # LABELSST
-            #print 'LABELSST',
-            r, c, i = process_LABELSST(rec_data)
-            values[(r, c)] = SST[i]
-            #print r, c, SST[i].encode('cp866')
-        elif rec_id == 0x0204: # LABEL
-            #print 'LABEL',
-            r, c, b = process_LABEL(biff8, rec_data)
-            values[(r, c)] = b
-            #print r, c, b.encode('cp866')
-        elif rec_id == 0x00D6: # RSTRING
-            #print 'RSTRING',
-            r, c, b = process_RSTRING(biff8, rec_data)
-            values[(r, c)] = b
-            #print r, c, b.encode('cp866')
-        elif rec_id == 0x027E: # RK
-            #print 'RK',
-            r, c, b = process_RK(rec_data)
-            values[(r, c)] = b
-            #print r, c, b
-        elif rec_id == 0x00BD: # MULRK
-            #print 'MULRK',
-            for r, c, b in process_MULRK(rec_data):
-                values[(r, c)] = b
-            #print r, c, b
-        elif rec_id == 0x0203: # NUMBER
-            #print 'NUMBER',
-            r, c, b = process_NUMBER(rec_data)
-            values[(r, c)] = b
-            #print r, c, b
-        elif rec_id == 0x0006: # FORMULA
-            #print 'FORMULA',
-            r, c, x = unpack('<3H', rec_data[0:6])
-            if rec_data[12] == '\xFF' and rec_data[13] == '\xFF':
-                if rec_data[6] == '\x00':
-                    got_str = False
-                    if ord(rec_data[14]) & 8:
-                        # part of shared formula
-                        rec_id, data_size = unpack('<2H', workbook_stream[stream_pos:stream_pos+4])
-                        stream_pos += 4                      
-                        rec_data = workbook_stream[stream_pos:stream_pos+data_size]
-                        stream_pos += data_size
-                        if rec_id == 0x0207: # STRING
-                            got_str = True
-                        elif rec_id not in (0x0221, 0x04BC, 0x0236, 0x0037, 0x0036):
-                            raise Exception("Expected ARRAY, SHRFMLA, TABLEOP* or STRING record")
-                    if not got_str:
-                        rec_id, data_size = unpack('<2H', workbook_stream[stream_pos:stream_pos+4])
-                        stream_pos += 4                      
-                        rec_data = workbook_stream[stream_pos:stream_pos+data_size]
-                        stream_pos += data_size
-                        if rec_id != 0x0207: # STRING
-                            raise Exception("Expected STRING record")
-                    values[(r, c)] = unpack2str(biff8, rec_data)
-                elif rec_data[6] == '\x01':
-                    # boolean 
-                    v = ord(rec_data[8])
-                    values[(r, c)] = bool(v)
-                elif rec_data[6] == '\x02':
-                    # error
-                    v = ord(rec_data[8])
-                    if v in ExcelMagic.error_msg_by_code:
-                        values[(r, c)] = ExcelMagic.error_msg_by_code[v]
-                    else:
-                        values[(r, c)] = u'#UNKNOWN ERROR!'
-                elif rec_data[6] == '\x03':
-                    # empty
-                    values[(r, c)] = u''
-                else:
-                    raise Exception("Unknown value for formula result")
-            else:
-                # 64-bit float
-                d, = unpack("<d", rec_data[6:14])
-                values[(r, c)] = d
-
-    encoding = None
-    return zip(sheet_names, sheets)

config/softs/pyExcelerator-0.6.3a.patched/pyExcelerator/Row.py

@@ -1,231 +0,0 @@
-#!/usr/bin/env python
-# -*- coding: windows-1251 -*-
-
-#  Copyright (C) 2005 Roman V. Kiseliov
-#  All rights reserved.
-# 
-#  Redistribution and use in source and binary forms, with or without
-#  modification, are permitted provided that the following conditions
-#  are met:
-# 
-#  1. Redistributions of source code must retain the above copyright
-#     notice, this list of conditions and the following disclaimer.
-# 
-#  2. Redistributions in binary form must reproduce the above copyright
-#     notice, this list of conditions and the following disclaimer in
-#     the documentation and/or other materials provided with the
-#     distribution.
-# 
-#  3. All advertising materials mentioning features or use of this
-#     software must display the following acknowledgment:
-#     "This product includes software developed by
-#      Roman V. Kiseliov <roman@kiseliov.ru>."
-# 
-#  4. Redistributions of any form whatsoever must retain the following
-#     acknowledgment:
-#     "This product includes software developed by
-#      Roman V. Kiseliov <roman@kiseliov.ru>."
-# 
-#  THIS SOFTWARE IS PROVIDED BY Roman V. Kiseliov ``AS IS'' AND ANY
-#  EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-#  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-#  PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL Roman V. Kiseliov OR
-#  ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-#  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-#  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-#  HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-#  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-#  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
-#  OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-__rev_id__ = """$Id: Row.py,v 1.6 2005/08/11 08:53:48 rvk Exp $"""
-
-
-import BIFFRecords
-from Deco import *
-from Worksheet import Worksheet
-import Style
-import Cell
-import ExcelFormula
-import datetime as dt
-
-
-class Row(object):
-    __slots__ = ["__init__", 
-                 "__adjust_height",
-                 "__adjust_bound_col_idx",
-                 "__excel_date_dt",
-                 "get_height_in_pixels",
-                 "set_style",
-                 "get_xf_index",
-                 "get_cells_count",
-                 "get_min_col",
-                 "get_max_col",
-                 "get_str_count",
-                 "get_row_biff_data",
-                 "get_cells_biff_data",
-                 "get_index",
-                 "write",
-                 "write_blanks",
-                 # private variables
-                 "__idx",
-                 "__parent",
-                 "__parent_wb",
-                 "__cells",
-                 "__min_col_idx",
-                 "__max_col_idx",
-                 "__total_str",
-                 "__xf_index",
-                 "__has_default_format",
-                 "__height_in_pixels",
-                 # public variables
-                 "height",
-                 "has_default_height",
-                 "level",
-                 "collapse",
-                 "hidden",
-                 "space_above",
-                 "space_below"]
-
-    #################################################################
-    ## Constructor
-    #################################################################
-    def __init__(self, index, parent_sheet):
-        self.__idx = index
-        self.__parent = parent_sheet
-        self.__parent_wb = parent_sheet.get_parent()
-        self.__cells = []
-        self.__min_col_idx = 0
-        self.__max_col_idx = 0
-        self.__total_str = 0
-        self.__xf_index = 0x0F
-        self.__has_default_format = 0
-        self.__height_in_pixels = 0x11
-        
-        self.height = 0x00FF
-        self.has_default_height = 0x00
-        self.level = 0
-        self.collapse = 0
-        self.hidden = 0
-        self.space_above = 0
-        self.space_below = 0
-
-
-    def __adjust_height(self, style):
-        twips = style.font.height
-        points = float(twips)/20.0
-        # Cell height in pixels can be calcuted by following approx. formula:
-        # cell height in pixels = font height in points * 83/50 + 2/5
-        # It works when screen resolution is 96 dpi 
-        pix = int(round(points*83.0/50.0 + 2.0/5.0))
-        if pix > self.__height_in_pixels:
-            self.__height_in_pixels = pix
-
-
-    def __adjust_bound_col_idx(self, *args):
-        for arg in args:
-            if arg < self.__min_col_idx:
-                self.__min_col_idx = arg
-            elif arg > self.__max_col_idx:
-                self.__max_col_idx = arg
-
-    def __excel_date_dt(self, date):
-        if isinstance(date, dt.date) and (not isinstance(date, dt.datetime)):
-            epoch = dt.date(1899, 12, 31)
-        elif isinstance(date, dt.time):
-            date = dt.datetime.combine(dt.datetime(1900, 1, 1), date)
-            epoch = dt.datetime(1900, 1, 1, 0, 0, 0)
-        else:
-            epoch = dt.datetime(1899, 12, 31, 0, 0, 0)
-        delta = date - epoch
-        xldate = delta.days + float(delta.seconds) / (24*60*60)
-        # Add a day for Excel's missing leap day in 1900
-        if xldate > 59:
-            xldate += 1
-        return xldate
-
-    def get_height_in_pixels(self):
-        return self.__height_in_pixels
-
-
-    #accepts(object, Style.XFStyle)
-    def set_style(self, style):
-        self.__adjust_height(style)
-        self.__xf_index = self.__parent_wb.add_style(style)
-
-            
-    def get_xf_index(self):
-        return self.__xf_index
-
-    
-    def get_cells_count(self):
-        return len(self.__cells)
-
-    
-    def get_min_col(self):
-        return self.__min_col_idx
-
-        
-    def get_max_col(self):
-        return self.__min_col_idx
-
-        
-    def get_str_count(self):
-        return self.__total_str
-
-
-    def get_row_biff_data(self):
-        height_options = (self.height & 0x07FFF) 
-        height_options |= (self.has_default_height & 0x01) << 15
-
-        options =  (self.level & 0x07) << 0
-        options |= (self.collapse & 0x01) << 4
-        options |= (self.hidden & 0x01) << 5
-        options |= (0x00 & 0x01) << 6
-        options |= (0x01 & 0x01) << 8
-        if self.__xf_index != 0x0F:
-            options |= (0x01 & 0x01) << 7
-        else:
-            options |= (0x00 & 0x01) << 7
-        options |= (self.__xf_index & 0x0FFF) << 16 
-        options |= (0x00 & self.space_above) << 28
-        options |= (0x00 & self.space_below) << 29
-        
-        return BIFFRecords.RowRecord(self.__idx, self.__min_col_idx, self.__max_col_idx, height_options, options).get()                                              
-                        
-
-    def get_cells_biff_data(self):
-        return ''.join([ cell.get_biff_data() for cell in self.__cells ])
-
-
-    def get_index(self):
-        return self.__idx
-
-
-    #accepts(object, int, (str, unicode, int, float, dt.datetime, dt.time, dt.date, ExcelFormula.Formula), Style.XFStyle)
-    def write(self, col, label, style):
-        self.__adjust_height(style)
-        self.__adjust_bound_col_idx(col)
-        if isinstance(label, (str, unicode)):
-            if len(label) > 0:
-                self.__cells.extend([ Cell.StrCell(self, col, self.__parent_wb.add_style(style), self.__parent_wb.add_str(label)) ])
-                self.__total_str += 1
-            else:
-                self.__cells.extend([ Cell.BlankCell(self, col, self.__parent_wb.add_style(style)) ])
-        elif isinstance(label, (int, float)):
-            self.__cells.extend([ Cell.NumberCell(self, col, self.__parent_wb.add_style(style), label) ])            
-        elif isinstance(label, (dt.datetime, dt.time)):
-            self.__cells.extend([ Cell.NumberCell(self, col, self.__parent_wb.add_style(style), self.__excel_date_dt(label)) ])
-        else:
-            self.__cells.extend([ Cell.FormulaCell(self, col, self.__parent_wb.add_style(style), label) ])
-
-    #accepts(object, int, int, Style.XFStyle)                        
-    def write_blanks(self, c1, c2, style):
-        self.__adjust_height(style)
-        self.__adjust_bound_col_idx(c1, c2)
-        self.__cells.extend([ Cell.MulBlankCell(self, c1, c2, self.__parent_wb.add_style(style)) ])
-
-        
-        

config/softs/pyExcelerator-0.6.3a.patched/pyExcelerator/Style.py

@@ -1,197 +0,0 @@
-#!/usr/bin/env python
-# -*- coding: windows-1251 -*-
-
-#  Copyright (C) 2005 Roman V. Kiseliov
-#  All rights reserved.
-# 
-#  Redistribution and use in source and binary forms, with or without
-#  modification, are permitted provided that the following conditions
-#  are met:
-# 
-#  1. Redistributions of source code must retain the above copyright
-#     notice, this list of conditions and the following disclaimer.
-# 
-#  2. Redistributions in binary form must reproduce the above copyright
-#     notice, this list of conditions and the following disclaimer in
-#     the documentation and/or other materials provided with the
-#     distribution.
-# 
-#  3. All advertising materials mentioning features or use of this
-#     software must display the following acknowledgment:
-#     "This product includes software developed by
-#      Roman V. Kiseliov <roman@kiseliov.ru>."
-# 
-#  4. Redistributions of any form whatsoever must retain the following
-#     acknowledgment:
-#     "This product includes software developed by
-#      Roman V. Kiseliov <roman@kiseliov.ru>."
-# 
-#  THIS SOFTWARE IS PROVIDED BY Roman V. Kiseliov ``AS IS'' AND ANY
-#  EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-#  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-#  PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL Roman V. Kiseliov OR
-#  ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-#  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-#  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-#  HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-#  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-#  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
-#  OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-__rev_id__ = """$Id: Style.py,v 1.4 2005/07/20 07:24:11 rvk Exp $"""
-
-
-import Formatting
-from BIFFRecords import *
-
-
-_default_num_format = 'general'
-_default_font = Formatting.Font()
-_default_alignment = Formatting.Alignment()
-_default_borders = Formatting.Borders()
-_default_pattern = Formatting.Pattern()
-_default_protection = Formatting.Protection()
-
-class XFStyle(object):
-    
-    def __init__(self):
-        self.num_format_str  = _default_num_format
-        self.font            = _default_font 
-        self.alignment       = _default_alignment
-        self.borders         = _default_borders
-        self.pattern         = _default_pattern 
-        self.protection      = _default_protection
-
-class StyleCollection(object):
-    _std_num_fmt_list = [
-            'general',
-            '0',
-            '0.00',
-            '#,##0',
-            '#,##0.00',
-            '"$"#,##0_);("$"#,##',
-            '"$"#,##0_);[Red]("$"#,##',
-            '"$"#,##0.00_);("$"#,##',
-            '"$"#,##0.00_);[Red]("$"#,##',
-            '0%',
-            '0.00%',
-            '0.00E+00',
-            '# ?/?',
-            '# ??/??',
-            'M/D/YY',
-            'D-MMM-YY',
-            'D-MMM',
-            'MMM-YY',
-            'h:mm AM/PM',
-            'h:mm:ss AM/PM',
-            'h:mm',
-            'h:mm:ss',
-            'M/D/YY h:mm',
-            '_(#,##0_);(#,##0)',
-            '_(#,##0_);[Red](#,##0)',
-            '_(#,##0.00_);(#,##0.00)',
-            '_(#,##0.00_);[Red](#,##0.00)',
-            '_("$"* #,##0_);_("$"* (#,##0);_("$"* "-"_);_(@_)',
-            '_(* #,##0_);_(* (#,##0);_(* "-"_);_(@_)',
-            '_("$"* #,##0.00_);_("$"* (#,##0.00);_("$"* "-"??_);_(@_)',
-            '_(* #,##0.00_);_(* (#,##0.00);_(* "-"??_);_(@_)',
-            'mm:ss',
-            '[h]:mm:ss',
-            'mm:ss.0',
-            '##0.0E+0',
-            '@'   
-    ]
-
-    def __init__(self):
-        self._fonts = {}
-        self._fonts[Formatting.Font()] = 0
-        self._fonts[Formatting.Font()] = 1
-        self._fonts[Formatting.Font()] = 2
-        self._fonts[Formatting.Font()] = 3
-        # The font with index 4 is omitted in all BIFF versions
-        self._fonts[Formatting.Font()] = 5
-        
-        self._num_formats = {}
-        for fmtidx, fmtstr in zip(range(0, 23), StyleCollection._std_num_fmt_list[0:23]):
-            self._num_formats[fmtstr] = fmtidx 
-        for fmtidx, fmtstr in zip(range(37, 50), StyleCollection._std_num_fmt_list[23:]):
-            self._num_formats[fmtstr] = fmtidx 
-
-        self._xf = {}
-        self.default_style = XFStyle()
-        self._default_xf = self._add_style(self.default_style)[0]
-        
-    def add(self, style): 
-        if style == None:
-            return 0x10
-        return self._add_style(style)[1]
-    
-    def _add_style(self, style):
-        num_format_str = style.num_format_str
-        if num_format_str in self._num_formats:
-            num_format_idx = self._num_formats[num_format_str]
-        else:
-            num_format_idx = 163 + len(self._num_formats) - len(StyleCollection._std_num_fmt_list)
-            self._num_formats[num_format_str] = num_format_idx
-            
-        font = style.font
-        if font in self._fonts:
-            font_idx = self._fonts[font]
-        else:
-            font_idx = len(self._fonts) + 1
-            self._fonts[font] = font_idx
-            
-        xf = (font_idx, num_format_idx, style.alignment, style.borders, style.pattern, style.protection)
-        
-        if xf in self._xf:
-            xf_index = self._xf[xf]
-        else:
-            xf_index = 0x10 + len(self._xf)
-            self._xf[xf] = xf_index
-            
-        return xf, xf_index
-        
-    def get_biff_data(self):
-        result = ''
-        result += self._all_fonts()
-        result += self._all_num_formats()
-        result += self._all_cell_styles()
-        result += self._all_styles()
-        return result 
-            
-    def _all_fonts(self):
-        result = ''
-        i = sorted([(v, k) for k, v in self._fonts.items()])
-        for font_idx, font in i:
-            result += font.get_biff_record().get()
-        return result
-    
-    def _all_num_formats(self):
-        result = ''
-        i = sorted([(v, k) for k, v in self._num_formats.items() if v>=163])
-        for fmtidx, fmtstr in i:
-            result += NumberFormatRecord(fmtidx, fmtstr).get()
-        return result
-    
-    def _all_cell_styles(self):        
-        result = ''
-        for i in range(0, 16):
-            result += XFRecord(self._default_xf, 'style').get()
-            
-        i = sorted([(v, k) for k, v in self._xf.items()])                            
-        for xf_idx, xf in i:
-            result += XFRecord(xf).get()
-        return result
-        
-    def _all_styles(self):
-        return StyleRecord().get()
-        
-if __name__ == '__main__':
-    sc = StyleCollection()
-    f = file('styles.bin', 'wb')
-    f.write(sc.get_biff_data())
-    f.close()
-
-            

config/softs/pyExcelerator-0.6.3a.patched/pyExcelerator/UnicodeUtils.py

@@ -1,135 +0,0 @@
-#!/usr/bin/env python
-# -*- coding: windows-1251 -*-
-
-#  Copyright (C) 2005 Roman V. Kiseliov
-#  All rights reserved.
-# 
-#  Redistribution and use in source and binary forms, with or without
-#  modification, are permitted provided that the following conditions
-#  are met:
-# 
-#  1. Redistributions of source code must retain the above copyright
-#     notice, this list of conditions and the following disclaimer.
-# 
-#  2. Redistributions in binary form must reproduce the above copyright
-#     notice, this list of conditions and the following disclaimer in
-#     the documentation and/or other materials provided with the
-#     distribution.
-# 
-#  3. All advertising materials mentioning features or use of this
-#     software must display the following acknowledgment:
-#     "This product includes software developed by
-#      Roman V. Kiseliov <roman@kiseliov.ru>."
-# 
-#  4. Redistributions of any form whatsoever must retain the following
-#     acknowledgment:
-#     "This product includes software developed by
-#      Roman V. Kiseliov <roman@kiseliov.ru>."
-# 
-#  THIS SOFTWARE IS PROVIDED BY Roman V. Kiseliov ``AS IS'' AND ANY
-#  EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-#  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-#  PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL Roman V. Kiseliov OR
-#  ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-#  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-#  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-#  HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-#  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-#  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
-#  OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-'''
-From BIFF8 on, strings are always stored using UTF-16LE  text encoding. The
-character  array  is  a  sequence  of  16-bit  values4.  Additionally it is
-possible  to  use  a  compressed  format, which omits the high bytes of all
-characters, if they are all zero.
-
-The following tables describe the standard format of the entire string, but
-in many records the strings differ from this format. This will be mentioned
-separately. It is possible (but not required) to store Rich-Text formatting
-information  and  Asian  phonetic information inside a Unicode string. This
-results  in  four  different  ways  to  store a string. The character array
-is not zero-terminated.
-
-The  string  consists  of  the  character count (as usual an 8-bit value or
-a  16-bit value), option flags, the character array and optional formatting
-information.  If the string is empty, sometimes the option flags field will
-not occur. This is mentioned at the respective place.
-
-Offset  Size    Contents
-0       1 or 2  Length of the string (character count, ln)
-1 or 2  1       Option flags:
-                  Bit   Mask Contents
-                  0     01H  Character compression (ccompr):
-                               0 = Compressed (8-bit characters)
-                               1 = Uncompressed (16-bit characters)
-                  2     04H  Asian phonetic settings (phonetic):
-                               0 = Does not contain Asian phonetic settings
-                               1 = Contains Asian phonetic settings
-                  3     08H  Rich-Text settings (richtext):
-                               0 = Does not contain Rich-Text settings
-                               1 = Contains Rich-Text settings
-[2 or 3] 2      (optional, only if richtext=1) Number of Rich-Text formatting runs (rt)
-[var.]   4      (optional, only if phonetic=1) Size of Asian phonetic settings block (in bytes, sz)
-var.     ln or 
-         2·ln   Character array (8-bit characters or 16-bit characters, dependent on ccompr)
-[var.]   4·rt   (optional, only if richtext=1) List of rt formatting runs 
-[var.]   sz     (optional, only if phonetic=1) Asian Phonetic Settings Block 
-'''
-
-
-__rev_id__ = """$Id: UnicodeUtils.py,v 1.4 2005/07/20 07:24:11 rvk Exp $"""
-
-
-import struct
-
-
-DEFAULT_ENCODING = 'cp1251'
-
-def u2ints(ustr):
-    ints = [ord(uchr) for uchr in ustr]
-    return ints
-
-def u2bytes(ustr):
-    ints = u2ints(ustr)
-    return struct.pack('<' + 'H'*len(ints), *ints)
-
-def upack2(_str):
-    try:
-        ustr = u2bytes(unicode(_str, 'ascii'))
-        return struct.pack('<HB', len(_str), 0) + _str    
-    except:
-        if isinstance(_str, unicode):
-            ustr = u2bytes(_str)
-        else:
-            ustr = u2bytes(unicode(_str, DEFAULT_ENCODING))
-        return struct.pack('<HB', len(_str), 1) + ustr
-
-def upack1(_str):
-    try:
-        ustr = u2bytes(unicode(_str, 'ascii'))
-        return struct.pack('BB', len(_str), 0) + _str    
-    except:
-        if isinstance(_str, unicode):
-            ustr = u2bytes(_str)
-        else:
-            ustr = u2bytes(unicode(_str, DEFAULT_ENCODING))
-        return struct.pack('BB', len(_str), 1) + ustr
-
-if __name__ == '__main__':   
-    f = file('out0.bin', 'wb')
-    f.write(u2bytes('þíèêîä: unicode'))
-    f.close()
-
-    f = file('out1.bin', 'wb')
-    f.write(upack1('þíèêîä: unicode'))
-    f.close()
-
-    f = file('out2.bin', 'wb')
-    f.write(upack2('þíèêîä: unicode'))
-    f.close()
-
-
-

config/softs/pyExcelerator-0.6.3a.patched/pyExcelerator/Utils.py

@@ -1,165 +0,0 @@
-# pyXLWriter: A library for generating Excel Spreadsheets
-# Copyright (c) 2004 Evgeny Filatov <fufff@users.sourceforge.net>
-# Copyright (c) 2002-2004 John McNamara (Perl Spreadsheet::WriteExcel)
-#
-# This library is free software; you can redistribute it and/or modify it
-# under the terms of the GNU Lesser General Public License as published by
-# the Free Software Foundation; either version 2.1 of the License, or
-# (at your option) any later version.
-#
-# This library is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU Lesser
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with this library; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-#----------------------------------------------------------------------------
-# This module was written/ported from PERL Spreadsheet::WriteExcel module
-# The author of the PERL Spreadsheet::WriteExcel module is John McNamara
-# <jmcnamara@cpan.org>
-#----------------------------------------------------------------------------
-# See the README.txt distributed with pyXLWriter for more details.
-
-# Portions are (C) Roman V. Kiseliov, 2005
-
-"""pyXLWriter.utilites
-
-Utilities for work with reference to cells
-
-"""
-__rev_id__ = """$Id: Utils.py,v 1.1 2005/08/11 08:53:48 rvk Exp $"""
-
-import re
-from struct import pack
-from ExcelMagic import MAX_ROW, MAX_COL
-
-
-_re_cell_ex = re.compile(r"(\$?)([A-I]?[A-Z])(\$?)(\d+)")
-_re_row_range = re.compile(r"\$?(\d+):\$?(\d+)")
-_re_col_range = re.compile(r"\$?([A-I]?[A-Z]):\$?([A-I]?[A-Z])")
-_re_cell_range = re.compile(r"\$?([A-I]?[A-Z]\$?\d+):\$?([A-I]?[A-Z]\$?\d+)")
-_re_cell_ref = re.compile(r"\$?([A-I]?[A-Z]\$?\d+)")
-
-
-def col_by_name(colname):
-    """
-    """
-    col = 0
-    pow = 1
-    for i in xrange(len(colname)-1, -1, -1):
-        ch = colname[i]
-        col += (ord(ch) - ord('A') + 1) * pow
-        pow *= 26
-    return col - 1
-
-
-def cell_to_rowcol(cell):
-    """Convert an Excel cell reference string in A1 notation
-    to numeric row/col notation.
-  
-    Returns: row, col, row_abs, col_abs
- 
-    """
-    m = _re_cell_ex.match(cell)
-    if not m:
-        raise Exception("Error in cell format")
-    col_abs, col, row_abs, row = m.groups()
-    row_abs = bool(row_abs)
-    col_abs = bool(col_abs)
-    row = int(row) - 1
-    col = col_by_name(col)
-    return row, col, row_abs, col_abs
-
-
-def cell_to_rowcol2(cell):
-    """Convert an Excel cell reference string in A1 notation
-    to numeric row/col notation.
-  
-    Returns: row, col
-    
-    """
-    m = _re_cell_ex.match(cell)
-    if not m:
-        raise Exception("Error in cell format")
-    col_abs, col, row_abs, row = m.groups()
-    # Convert base26 column string to number
-    # All your Base are belong to us.
-    row = int(row) - 1
-    col = col_by_name(col)
-    return row, col
-    
-    
-def rowcol_to_cell(row, col, row_abs=False, col_abs=False):
-    """Convert numeric row/col notation to an Excel cell reference string in
-    A1 notation.
- 
-    """
-    d = col // 26
-    m = col % 26
-    chr1 = ""    # Most significant character in AA1
-    if row_abs:
-        row_abs = '$'
-    else:
-        row_abs = ''
-    if col_abs:
-        col_abs = '$'
-    else:
-        col_abs = ''
-    if d > 0:
-        chr1 = chr(ord('A') + d  - 1)
-    chr2 = chr(ord('A') + m)
-    # Zero index to 1-index
-    return col_abs + chr1 + chr2 + row_abs + str(row + 1)
-
-
-def cellrange_to_rowcol_pair(cellrange):
-    """Convert cell range string in A1 notation to numeric row/col 
-    pair.
-
-    Returns: row1, col1, row2, col2
-    
-    """
-    cellrange = cellrange.upper()
-    # Convert a row range: '1:3'
-    res = _re_row_range.match(cellrange)
-    if res:
-        row1 = int(res.group(1)) - 1
-        col1 = 0
-        row2 = int(res.group(2)) - 1
-        col2 = -1
-        return row1, col1, row2, col2
-    # Convert a column range: 'A:A' or 'B:G'.
-    # A range such as A:A is equivalent to A1:A16384, so add rows as required
-    res = _re_col_range.match(cellrange)
-    if res:
-        col1 = col_by_name(res.group(1))
-        row1 = 0
-        col2 = col_by_name(res.group(2))
-        row2 = -1
-        return row1, col1, row2, col2
-    # Convert a cell range: 'A1:B7'
-    res = _re_cell_range.match(cellrange)
-    if res:
-        row1, col1 = cell_to_rowcol2(res.group(1))
-        row2, col2 = cell_to_rowcol2(res.group(2))
-        return row1, col1, row2, col2
-    # Convert a cell reference: 'A1' or 'AD2000'
-    res = _re_cell_ref.match(cellrange)
-    if res:
-        row1, col1 = cell_to_rowcol2(res.group(1))
-        return row1, col1, row1, col1
-    raise Exception("Unknown cell reference %s" % (cell))
-
-
-def cell_to_packed_rowcol(cell):
-    """ pack row and column into the required 4 byte format """
-    row, col, row_abs, col_abs = cell_to_rowcol(cell)
-    if col >= MAX_COL:
-        raise Exception("Column %s greater than IV in formula" % cell)
-    if row >= MAX_ROW: # this for BIFF8. for BIFF7 available 2^14
-        raise Exception("Row %s greater than %d in formula" % (cell, MAX_ROW))
-    col |= int(not row_abs) << 15
-    col |= int(not col_abs) << 14
-    return row, col

config/softs/pyExcelerator-0.6.3a.patched/pyExcelerator/Workbook.py

@@ -1,576 +0,0 @@
-#!/usr/bin/env python
-# -*- coding: windows-1251 -*-
-
-#  Copyright (C) 2005 Roman V. Kiseliov
-#  All rights reserved.
-# 
-#  Redistribution and use in source and binary forms, with or without
-#  modification, are permitted provided that the following conditions
-#  are met:
-# 
-#  1. Redistributions of source code must retain the above copyright
-#     notice, this list of conditions and the following disclaimer.
-# 
-#  2. Redistributions in binary form must reproduce the above copyright
-#     notice, this list of conditions and the following disclaimer in
-#     the documentation and/or other materials provided with the
-#     distribution.
-# 
-#  3. All advertising materials mentioning features or use of this
-#     software must display the following acknowledgment:
-#     "This product includes software developed by
-#      Roman V. Kiseliov <roman@kiseliov.ru>."
-# 
-#  4. Redistributions of any form whatsoever must retain the following
-#     acknowledgment:
-#     "This product includes software developed by
-#      Roman V. Kiseliov <roman@kiseliov.ru>."
-# 
-#  THIS SOFTWARE IS PROVIDED BY Roman V. Kiseliov ``AS IS'' AND ANY
-#  EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-#  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-#  PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL Roman V. Kiseliov OR
-#  ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-#  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-#  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-#  HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-#  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-#  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
-#  OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-'''
-Record Order in BIFF8
-  Workbook Globals Substream
-      BOF Type = workbook globals
-      Interface Header
-      MMS
-      Interface End
-      WRITEACCESS
-      CODEPAGE
-      DSF
-      TABID
-      FNGROUPCOUNT
-      Workbook Protection Block
-            WINDOWPROTECT
-            PROTECT
-            PASSWORD
-            PROT4REV
-            PROT4REVPASS
-      BACKUP
-      HIDEOBJ 
-      WINDOW1 
-      DATEMODE 
-      PRECISION
-      REFRESHALL
-      BOOKBOOL 
-      FONT +
-      FORMAT *
-      XF +
-      STYLE +
-    ? PALETTE
-      USESELFS
-    
-      BOUNDSHEET +
-    
-      COUNTRY 
-    ? Link Table 
-      SST 
-      ExtSST
-      EOF
-'''
-
-
-__rev_id__ = """$Id: Workbook.py,v 1.5 2005/10/26 07:44:24 rvk Exp $"""
-
-
-import BIFFRecords
-import Style
-from Deco import accepts, returns
-
-
-class Workbook(object):
-
-    #################################################################
-    ## Constructor
-    #################################################################
-    #accepts(object)
-    def __init__(self):
-        self.__owner = 'None'       
-        self.__country_code = 0x07 
-        self.__wnd_protect = 0
-        self.__obj_protect = 0
-        self.__protect = 0        
-        self.__backup_on_save = 0
-        # for WINDOW1 record
-        self.__hpos_twips = 0x01E0
-        self.__vpos_twips = 0x005A
-        self.__width_twips = 0x3FCF
-        self.__height_twips = 0x2A4E
-        
-        self.__active_sheet = 0
-        self.__first_tab_index = 0
-        self.__selected_tabs = 0x01
-        self.__tab_width_twips = 0x0258
-        
-        self.__wnd_hidden = 0
-        self.__wnd_mini = 0
-        self.__hscroll_visible = 1
-        self.__vscroll_visible = 1
-        self.__tabs_visible = 1
-
-        self.__styles = Style.StyleCollection()
-         
-        self.__dates_1904 = 0
-        self.__use_cell_values = 1
-        
-        self.__sst = BIFFRecords.SharedStringTable()
-        
-        self.__worksheets = []
-
-    #################################################################
-    ## Properties, "getters", "setters"
-    #################################################################
-
-    #accepts(object, str)
-    def set_owner(self, value):
-        self.__owner = value
-
-    def get_owner(self):
-        return self.__owner
-
-    owner = property(get_owner, set_owner)
-
-    #################################################################
-
-    #accepts(object, int)
-    def set_country_code(self, value):
-        self.__country_code = value
-
-    def get_country_code(self):
-        return self.__country_code
-
-    country_code = property(get_country_code, set_country_code)
-
-    #################################################################
-
-    #accepts(object, bool)
-    def set_wnd_protect(self, value):
-        self.__wnd_protect = int(value)
-
-    def get_wnd_protect(self):
-        return bool(self.__wnd_protect)
-
-    wnd_protect = property(get_wnd_protect, set_wnd_protect)
-
-    #################################################################
-
-    #accepts(object, bool)
-    def set_obj_protect(self, value):
-        self.__obj_protect = int(value)
-
-    def get_obj_protect(self):
-        return bool(self.__obj_protect)
-
-    obj_protect = property(get_obj_protect, set_obj_protect)
-
-    #################################################################
-
-    #accepts(object, bool)
-    def set_protect(self, value):
-        self.__protect = int(value)
-
-    def get_protect(self):
-        return bool(self.__protect)
-
-    protect = property(get_protect, set_protect)
-    
-    #################################################################
-
-    #accepts(object, bool)
-    def set_backup_on_save(self, value):
-        self.__backup_on_save = int(value)
-
-    def get_backup_on_save(self):
-        return bool(self.__backup_on_save)
-
-    backup_on_save = property(get_backup_on_save, set_backup_on_save)
-
-    #################################################################
-
-    #accepts(object, int)
-    def set_hpos(self, value):
-        self.__hpos_twips = value & 0xFFFF
-
-    def get_hpos(self):
-        return self.__hpos_twips
-
-    hpos = property(get_hpos, set_hpos)
-
-    #################################################################
-
-    #accepts(object, int)
-    def set_vpos(self, value):
-        self.__vpos_twips = value & 0xFFFF
-
-    def get_vpos(self):
-        return self.__vpos_twips
-
-    vpos = property(get_vpos, set_vpos)
-
-    #################################################################
-
-    #accepts(object, int)
-    def set_width(self, value):
-        self.__width_twips = value & 0xFFFF
-
-    def get_width(self):
-        return self.__width_twips
-
-    width = property(get_width, set_width)
-
-    #################################################################
-
-    #accepts(object, int)
-    def set_height(self, value):
-        self.__height_twips = value & 0xFFFF
-
-    def get_height(self):
-        return self.__height_twips
-
-    height = property(get_height, set_height)
-
-    #################################################################
-
-    #accepts(object, int)
-    def set_active_sheet(self, value):
-        self.__active_sheet = value & 0xFFFF
-        self.__first_tab_index = self.__active_sheet
-
-    def get_active_sheet(self):
-        return self.__active_sheet
-
-    active_sheet = property(get_active_sheet, set_active_sheet)
-
-    #################################################################
-
-    #accepts(object, int)
-    def set_tab_width(self, value):
-        self.__tab_width_twips = value & 0xFFFF
-
-    def get_tab_width(self):
-        return self.__tab_width_twips
-
-    tab_width = property(get_tab_width, set_tab_width)
-
-    #################################################################
-
-    #accepts(object, bool)
-    def set_wnd_visible(self, value):
-        self.__wnd_hidden = int(not value)
-
-    def get_wnd_visible(self):
-        return not bool(self.__wnd_hidden)
-
-    wnd_visible = property(get_wnd_visible, set_wnd_visible)
-
-    #################################################################
-
-    #accepts(object, bool)
-    def set_wnd_mini(self, value):
-        self.__wnd_mini = int(value)
-
-    def get_wnd_mini(self):
-        return bool(self.__wnd_mini)
-
-    wnd_mini = property(get_wnd_mini, set_wnd_mini)
-
-    #################################################################
-
-    #accepts(object, bool)
-    def set_hscroll_visible(self, value):
-        self.__hscroll_visible = int(value)
-
-    def get_hscroll_visible(self):
-        return bool(self.__hscroll_visible)
-
-    hscroll_visible = property(get_hscroll_visible, set_hscroll_visible)
-
-    #################################################################
-
-    #accepts(object, bool)
-    def set_vscroll_visible(self, value):
-        self.__vscroll_visible = int(value)
-
-    def get_vscroll_visible(self):
-        return bool(self.__vscroll_visible)
-
-    vscroll_visible = property(get_vscroll_visible, set_vscroll_visible)
-
-    #################################################################
-
-    #accepts(object, bool)
-    def set_tabs_visible(self, value):
-        self.__tabs_visible = int(value)
-
-    def get_tabs_visible(self):
-        return bool(self.__tabs_visible)
-
-    tabs_visible = property(get_tabs_visible, set_tabs_visible)
-
-    #################################################################
-
-    #accepts(object, bool)
-    def set_dates_1904(self, value):
-        self.__dates_1904 = int(value)
-
-    def get_dates_1904(self):
-        return bool(self.__dates_1904)
-
-    dates_1904 = property(get_dates_1904, set_dates_1904)
-
-    #################################################################
-
-    #accepts(object, bool)
-    def set_use_cell_values(self, value):
-        self.__use_cell_values = int(value)
-
-    def get_use_cell_values(self):
-        return bool(self.__use_cell_values)
-
-    use_cell_values = property(get_use_cell_values, set_use_cell_values)
-
-    #################################################################
-
-    def get_default_style(self):
-        return self.__styles.default_style
-
-    default_style = property(get_default_style)
-
-    ##################################################################
-    ## Methods
-    ##################################################################
-
-    #accepts(object, Style.XFStyle)
-    def add_style(self, style):
-        return self.__styles.add(style)
-
-    #accepts(object, (str, unicode))    
-    def add_str(self, s):
-        return self.__sst.add_str(s)
-        
-    #accepts(object, str)    
-    def str_index(self, s):
-        return self.__sst.str_index(s)
-        
-    #accepts(object, (str, unicode))    
-    def add_sheet(self, sheetname):
-        import Worksheet
-        self.__worksheets.append(Worksheet.Worksheet(sheetname, self))
-        return self.__worksheets[-1]
-
-    #accepts(object, int)    
-    def get_sheet(self, sheetnum):
-        return self.__worksheets[sheetnum]
-        
-    ##################################################################
-    ## BIFF records generation
-    ##################################################################
-
-    def __bof_rec(self):
-        return BIFFRecords.Biff8BOFRecord(BIFFRecords.Biff8BOFRecord.BOOK_GLOBAL).get()
-
-    def __eof_rec(self):
-        return BIFFRecords.EOFRecord().get()
-        
-    def __intf_hdr_rec(self):
-        return BIFFRecords.InteraceHdrRecord().get()
-
-    def __intf_end_rec(self):
-        return BIFFRecords.InteraceEndRecord().get()
-
-    def __intf_mms_rec(self):
-        return BIFFRecords.MMSRecord().get()
-
-    def __write_access_rec(self):
-        return BIFFRecords.WriteAccessRecord(self.__owner).get()
-
-    def __wnd_protect_rec(self):
-        return BIFFRecords.WindowProtectRecord(self.__wnd_protect).get()
-
-    def __obj_protect_rec(self):
-        return BIFFRecords.ObjectProtectRecord(self.__obj_protect).get()
-
-    def __protect_rec(self):
-        return BIFFRecords.ProtectRecord(self.__protect).get()
-
-    def __password_rec(self):
-        return BIFFRecords.PasswordRecord().get()
-
-    def __prot4rev_rec(self):
-        return BIFFRecords.Prot4RevRecord().get()
-
-    def __prot4rev_pass_rec(self):
-        return BIFFRecords.Prot4RevPassRecord().get()
-
-    def __backup_rec(self):
-        return BIFFRecords.BackupRecord(self.__backup_on_save).get()
-        
-    def __hide_obj_rec(self):
-        return BIFFRecords.HideObjRecord().get()
-        
-    def __window1_rec(self):
-        flags = 0
-        flags |= (self.__wnd_hidden) << 0
-        flags |= (self.__wnd_mini) << 1
-        flags |= (self.__hscroll_visible) << 3
-        flags |= (self.__vscroll_visible) << 4
-        flags |= (self.__tabs_visible) << 5
-        
-        return BIFFRecords.Window1Record(self.__hpos_twips, self.__vpos_twips, 
-                                self.__width_twips, self.__height_twips, 
-                                flags,
-                                self.__active_sheet, self.__first_tab_index, 
-                                self.__selected_tabs, self.__tab_width_twips).get()
-        
-    def __codepage_rec(self):
-        return BIFFRecords.CodepageBiff8Record().get()
-        
-    def __country_rec(self):
-        return BIFFRecords.CountryRecord(self.__country_code, self.__country_code).get()
-        
-    def __dsf_rec(self):
-        return BIFFRecords.DSFRecord().get()
-        
-    def __tabid_rec(self):
-        return BIFFRecords.TabIDRecord(len(self.__worksheets)).get()
-        
-    def __fngroupcount_rec(self):
-        return BIFFRecords.FnGroupCountRecord().get()
-        
-    def __datemode_rec(self):
-        return BIFFRecords.DateModeRecord(self.__dates_1904).get()        
-
-    def __precision_rec(self):
-        return BIFFRecords.PrecisionRecord(self.__use_cell_values).get()         
-
-    def __refresh_all_rec(self):
-        return BIFFRecords.RefreshAllRecord().get()        
-
-    def __bookbool_rec(self):
-        return BIFFRecords.BookBoolRecord().get()         
-
-    def __all_fonts_num_formats_xf_styles_rec(self):
-        return self.__styles.get_biff_data()
-
-    def __palette_rec(self):
-        result = ''
-        return result
-        
-    def __useselfs_rec(self):
-        return BIFFRecords.UseSelfsRecord().get()
-        
-    def __boundsheets_rec(self, data_len_before, data_len_after, sheet_biff_lens):
-        #  .................................  
-        # BOUNDSEHEET0
-        # BOUNDSEHEET1
-        # BOUNDSEHEET2
-        # ..................................
-        # WORKSHEET0
-        # WORKSHEET1
-        # WORKSHEET2
-        boundsheets_len = 0
-        for sheet in self.__worksheets:
-            boundsheets_len += len(BIFFRecords.BoundSheetRecord(0x00L, sheet.hidden, sheet.name).get())
-        
-        start = data_len_before + boundsheets_len + data_len_after
-        
-        result = ''
-        for sheet_biff_len,  sheet in zip(sheet_biff_lens, self.__worksheets):
-            result += BIFFRecords.BoundSheetRecord(start, sheet.hidden, sheet.name).get()
-            start += sheet_biff_len            
-        return result
-
-    def __all_links_rec(self):
-        result = ''
-        return result
-        
-    def __sst_rec(self):
-        return self.__sst.get_biff_record()
-        
-    def __ext_sst_rec(self, abs_stream_pos):
-        return ''
-        #return BIFFRecords.ExtSSTRecord(abs_stream_pos, self.sst_record.str_placement,
-        #self.sst_record.portions_len).get()
-
-    def get_biff_data(self):
-        before = ''
-        before += self.__bof_rec()
-        before += self.__intf_hdr_rec()
-        before += self.__intf_mms_rec()
-        before += self.__intf_end_rec()
-        before += self.__write_access_rec()
-        before += self.__codepage_rec()
-        before += self.__dsf_rec() 
-        before += self.__tabid_rec() 
-        before += self.__fngroupcount_rec()
-        before += self.__wnd_protect_rec()
-        before += self.__protect_rec()
-        before += self.__obj_protect_rec()
-        before += self.__password_rec()
-        before += self.__prot4rev_rec()
-        before += self.__prot4rev_pass_rec()
-        before += self.__backup_rec()        
-        before += self.__hide_obj_rec()        
-        before += self.__window1_rec()
-        before += self.__datemode_rec()
-        before += self.__precision_rec()
-        before += self.__refresh_all_rec()
-        before += self.__bookbool_rec()
-        before += self.__all_fonts_num_formats_xf_styles_rec()
-        before += self.__palette_rec()
-        before += self.__useselfs_rec()
-        
-        country            = self.__country_rec()
-        all_links          = self.__all_links_rec()
-        
-        shared_str_table   = self.__sst_rec()        
-        after = country + all_links + shared_str_table
-        
-        ext_sst = self.__ext_sst_rec(0) # need fake cause we need calc stream pos
-        eof = self.__eof_rec()
-
-        self.__worksheets[self.__active_sheet].selected = True
-        sheets = ''
-        sheet_biff_lens = []
-        for sheet in self.__worksheets:
-            data = sheet.get_biff_data()
-            sheets += data
-            sheet_biff_lens.append(len(data))
-            
-        bundlesheets = self.__boundsheets_rec(len(before), len(after)+len(ext_sst)+len(eof), sheet_biff_lens)       
-       
-        sst_stream_pos = len(before) + len(bundlesheets) + len(country)  + len(all_links)
-        ext_sst = self.__ext_sst_rec(sst_stream_pos)           
-        
-        return before + bundlesheets + after + ext_sst + eof + sheets
-
-    def save(self, filename):
-        import CompoundDoc
-
-        doc = CompoundDoc.XlsDoc()
-        doc.save(filename, self.get_biff_data())
-
-    def savetostr(self): # XXX ADDED BY EMMANUEL
-        import CompoundDoc
-
-        doc = CompoundDoc.XlsDoc()
-        return doc.savetostr(self.get_biff_data())
-
-if __name__ == '__main__':
-    wb = Workbook()
-    f = file('workbook.bin', 'wb')
-    f.write(wb.get_biff_data())
-    f.close()
-    

config/softs/pyExcelerator-0.6.3a.patched/pyExcelerator/__init__.py

@@ -1,27 +0,0 @@
-#!/usr/bin/env python
-# -*- coding: windows-1251 -*-
-
-__rev_id__ = """$Id: __init__.py,v 1.6 2005/08/11 08:53:48 rvk Exp $"""
-
-import sys
-if sys.version_info[:2] < (2, 4):
-    def sorted(l, cmp=None, key=None, reverse=False):
-        tmp = list(l)
-        tmp.sort(cmp)
-        return tmp
-    import __builtin__
-    __builtin__.sorted = sorted
-    del __builtin__
-##    print >>sys.stderr, "Sorry, pyExcelerator requires Python 2.4 or later"
-##    sys.exit(1)
-
-
-from Workbook import Workbook
-from Worksheet import Worksheet
-from Row import Row
-from Column import Column 
-from Formatting import Font, Alignment, Borders, Pattern, Protection
-from Style import XFStyle 
-from ImportXLS import * 
-
-from ExcelFormula import *