merge

ZScoUsers.py

@@ -261,7 +261,7 @@ class ZScoUsers(
 
     security.declareProtected(ScoUsersAdmin, "user_info")
 
-    def user_info(self, user_name=None, user=None):
+    def user_info(self, user_name=None, user=None, format=None, REQUEST=None):
         """Donne infos sur l'utilisateur (qui peut ne pas etre dans notre base).
         Si user_name est specifie, interroge la BD. Sinon, user doit etre un dict.
         """
@@ -322,7 +322,7 @@ class ZScoUsers(
             # nomnoacc est le nom en minuscules sans accents
             info["nomnoacc"] = scu.suppress_accents(scu.strlower(info["nom"]))
 
-            return info
+            return scu.sendResult(REQUEST, info, name="user", format=format)
 
     def _can_handle_passwd(self, authuser, user_name, allow_admindepts=False):
         """true if authuser can see or change passwd of user_name.

config/config.sh

@@ -34,9 +34,11 @@ export POSTGRES_USER=www-data
 if [ "${debian_version}" = "10" ]
 then
  PSQL=/usr/lib/postgresql/11/bin/psql
+ export POSTGRES_SERVICE="postgresql@11-main.service"
 elif [ "${debian_version}" = "9" ]
 then
  PSQL=/usr/lib/postgresql/9.6/bin/psql
+ export POSTGRES_SERVICE="postgresql"
 elif [ "${debian_version}" = "8" ] 
 then
  PSQL=/usr/lib/postgresql/9.4/bin/psql

config/configure_systemd.sh

@@ -8,7 +8,13 @@ source utils.sh
 check_uid_root $0
 
 echo 'Installation du demarrage automatique de ScoDoc (systemd)'
-cp $SCODOC_DIR/config/etc/scodoc.service /etc/systemd/system
+
+# La variable POSTGRES_SERVICE doit être positionnée dans config.sh
+# suivant la version de Debian et de postgresql
+[ -z "${POSTGRES_SERVICE}" ] && die "incompatible Debian version"
+
+cat "$SCODOC_DIR/config/etc/scodoc.service" | sed 's/{{postgresql}}/'"${POSTGRES_SERVICE}"'/g' > /etc/systemd/system/scodoc.service
+
 systemctl enable scodoc.service
 
 echo "A partir de maintenant, utiliser"

config/etc/scodoc.service

@@ -1,13 +1,15 @@
 # ScoDoc7 service 
 #  Zope based
-#  Depends on postgresql
-#  => is restarted when postgresql restarts
+#  Depends on {{postgresql}} (replaced by installation script by 
+#    postgresql@11-main.service on Debian 10
+#    postgresql on Debian <= 9
+#  => is restarted when {{postgresql}} restarts
 #
 [Unit]
 Description=ScoDoc 7 service
-After=network.target postgresql
-Requires=postgresql
-PartOf=postgresql
+After=network.target {{postgresql}}
+Requires={{postgresql}}
+PartOf={{postgresql}}
 StartLimitIntervalSec=0
 
 [Service]
@@ -21,4 +23,4 @@ ExecStop=/opt/scodoc/bin/zopectl stop
 ExecReload=/opt/scodoc/bin/zopectl restart
 
 [Install]
-WantedBy=postgresql
+WantedBy={{postgresql}}

config/install_debian10.sh

@@ -220,9 +220,7 @@ read ans
 if [ "$(norm_ans "$ans")" != 'N' ]
 then
     # ScoDoc 7.19+ uses systemd
-    echo 'Installation du demarrage automatique de ScoDoc (systemd)'
-    cp $SCODOC_DIR/config/etc/scodoc.service /etc/systemd/system
-    systemctl enable scodoc.service
+    $SCODOC_DIR/config/configure_systemd.sh
 fi
 
 

config/softs/pyExcelerator-0.6.3a.patched/.cvsignore

@@ -0,0 +1 @@
+build

config/softs/pyExcelerator-0.6.3a.patched/CHANGES.txt

@@ -0,0 +1,68 @@
+0.4.0a (27.03.2005)
+---------
+    * First public version
+
+0.5.0a (11.05.2005)
+---------
+    * pyExcelerator now can import Excel 5/95/97/2000/XP/2003 files.
+      With imported information you can do what you want.
+      See ./examples/xls2txt.py for reference.
+    * fixed bug in MS OLE2 compound document dumper (not in writer :))
+      Bug causes dumper to combine links in sectors' allocation chain sectors
+      contained in additional MSAT with SAT data.
+    * Excel files dumper supports now Excel 5/95/97/2000/XP/2003 files
+      and produces more informative output.
+      
+0.5.1a (14.05.2005)
+---------
+    * improved floating point decoding code
+
+0.5.2a (18.05.2005)
+---------
+    * improved perfomance (especially on nonfragmented streams)
+    * now pyExcelerator can process XLS files with short streams
+    * OLE2 compound document dumper supports short streams
+    * reading UTF-16-LE and Latin-1 with more accuracy
+    * in DSF (double stream file) XLS data extracted from stream "Workbook"
+    * improved floating point/integer values decoding code
+
+0.5.3a (19.05.2005)
+---------
+    * typos in biff-dumper.py fixed :(
+    * now pyExcelerator can correctly import XLS files with charts
+    * added ability to override default file's encoding
+    * new examples (or tools :)) -- ./examples/xls2csv.py, ./examples/xls2html.py
+
+0.6.0a (19.07.2005)
+---------
+    * blanks, numbers, currency (use number formats!) and dates (use number formats!)
+    * pyExcelerator uses 1.5-2 times less memory (thanks to __brains__ and __slots__)
+    * fixes for Big Endian CPUs
+    * some refactorings
+    * new examples: blanks.py, merged1.py, dates.py, numbers.py, num_formats.py, formulas.py
+    * most important change: formulas support
+
+0.6.1a (29.09.2005)
+---------
+    * fixed: exception when reading OLE2 files with incorrect MSAT
+      (sector ids points to nonexistense sectors)
+
+0.6.2a (30.09.2005)
+---------
+    * fixed: exception when reading OLE2 files with incorrect SSAT
+      (sector ids points to nonexistense sectors)
+
+0.6.3a (25.10.2005)
+---------
+    * slightly new algorithm for reading OLE2 files. I hope it is
+      more robust
+    * splitting and frozing
+    * worksheet protection
+    * protection password
+    * workbook protection
+    * new example: protection.py, hyperlinks.py, panes.py
+    * extracting formula results
+    * speed optmizations(for example, benchmark big-35Mb.py runs about 
+      20-30% faster)
+    * updated THANKS file
+    * xls2csv, xls2txt, xls2html now resides in ./tools

config/softs/pyExcelerator-0.6.3a.patched/CVS/Entries

@@ -0,0 +1,13 @@
+/.cvsignore/1.1/Thu May 19 09:27:42 2005//
+D/examples////
+D/hrc////
+D/museum////
+D/pyExcelerator////
+D/tools////
+/LICENSE.txt/1.3/Tue Jul 19 18:58:44 2005//
+/README.txt/1.3/Sat Aug 13 23:25:44 2005//
+/TODO.txt/1.2/Wed Aug 10 20:42:08 2005//
+/CHANGES.txt/1.11/Tue Oct 25 19:34:26 2005//
+/PKG-INFO/1.5/Tue Oct  4 20:19:20 2005//
+/THANKS.txt/1.3/Thu Oct 20 20:46:16 2005//
+/setup.py/1.10/Wed Oct 26 07:44:23 2005//

config/softs/pyExcelerator-0.6.3a.patched/CVS/Entries.Extra

@@ -0,0 +1,13 @@
+/.cvsignore////*///
+D/examples///////
+D/hrc///////
+D/museum///////
+D/pyExcelerator///////
+D/tools///////
+/LICENSE.txt////*///
+/README.txt////*///
+/TODO.txt////*///
+/CHANGES.txt////*///
+/PKG-INFO////*///
+/THANKS.txt////*///
+/setup.py////*///

config/softs/pyExcelerator-0.6.3a.patched/CVS/Entries.Extra.Old

@@ -0,0 +1,13 @@
+/.cvsignore////*///
+D/examples///////
+D/hrc///////
+D/museum///////
+D/pyExcelerator///////
+D/tools///////
+/LICENSE.txt////*///
+/THANKS.txt////*///
+/README.txt////*///
+/TODO.txt////*///
+/CHANGES.txt////*///
+/PKG-INFO////*///
+/setup.py////*///

config/softs/pyExcelerator-0.6.3a.patched/CVS/Entries.Old

@@ -0,0 +1,13 @@
+/.cvsignore/1.1/Thu May 19 09:27:42 2005//
+D/examples////
+D/hrc////
+D/museum////
+D/pyExcelerator////
+D/tools////
+/LICENSE.txt/1.3/Tue Jul 19 18:58:44 2005//
+/THANKS.txt/1.2/Thu Sep 29 18:06:58 2005//
+/README.txt/1.3/Sat Aug 13 23:25:44 2005//
+/TODO.txt/1.2/Wed Aug 10 20:42:08 2005//
+/CHANGES.txt/1.10/Fri Sep 30 09:14:44 2005//
+/PKG-INFO/1.4/Fri Sep 30 09:13:49 2005//
+/setup.py/1.9/Fri Sep 30 09:20:04 2005//

config/softs/pyExcelerator-0.6.3a.patched/CVS/Repository

@@ -0,0 +1 @@
+pyExcelerator

config/softs/pyExcelerator-0.6.3a.patched/CVS/Root

@@ -0,0 +1 @@
+:ext:rvk@cvs.sf.net:/cvsroot/pyexcelerator

config/softs/pyExcelerator-0.6.3a.patched/LICENSE.txt

@@ -0,0 +1,47 @@
+  Copyright (C) 2005 Roman V. Kiseliov
+  All rights reserved.
+ 
+  Redistribution and use in source and binary forms, with or without
+  modification, are permitted provided that the following conditions
+  are met:
+ 
+  1. Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+ 
+  2. Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in
+     the documentation and/or other materials provided with the
+     distribution.
+ 
+  3. All advertising materials mentioning features or use of this
+     software must display the following acknowledgment:
+     "This product includes software developed by
+      Roman V. Kiseliov <roman@kiseliov.ru>."
+ 
+  4. Redistributions of any form whatsoever must retain the following
+     acknowledgment:
+     "This product includes software developed by
+      Roman V. Kiseliov <roman@kiseliov.ru>."
+ 
+  THIS SOFTWARE IS PROVIDED BY Roman V. Kiseliov ``AS IS'' AND ANY
+  EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+  PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL Roman V. Kiseliov OR
+  ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+  HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+  OF THE POSSIBILITY OF SUCH DAMAGE.
+
+Roman V. Kiseliov
+Russia
+Kursk
+Libknecht St., 4
+
++7(0712)56-09-83
+
+<roman@kiseliov.ru>
+Subject: pyExcelerator

config/softs/pyExcelerator-0.6.3a.patched/PKG-INFO

@@ -0,0 +1,20 @@
+Metadata-Version: 1.0
+Name: pyExcelerator
+Version: 0.6.3a1
+Summary: Library to generate Microsoft Excel (tm) spreadsheet files or to extract data from such files
+Home-page: http://www.sourceforge.net/projects/pyexcelerator
+Author: Roman V. Kiseliov
+Author-email: roman@kiseliov.ru
+License: BSD
+Download-URL: http://www.sourceforge.net/projects/pyexcelerator
+Description: Generate Excel 97+ files. Extract data from Excel 95+ spreadsheets. Full-blown UNICODE support. Pure Python code.
+Keywords: xls,excel,spreadsheet,workbook
+Platform: Platform-independent
+Classifier: Development Status :: 3 - Alpha
+Classifier: Intended Audience :: Developers
+Classifier: License :: OSI Approved :: BSD License
+Classifier: Programming Language :: Python
+Classifier: Operating System :: OS Independent
+Classifier: Topic :: Database
+Classifier: Topic :: Office/Business
+Classifier: Topic :: Software Development :: Libraries :: Python Modules

config/softs/pyExcelerator-0.6.3a.patched/README.txt

@@ -0,0 +1,145 @@
+
+                        pyExcelerator
+                    --------------------
+
+
+                                                         Dedicated to Olya. 
+                                                With you it can be reality.
+
+
+
+0x0000. What's this?
+--------------------
+This   is   a    library   for   generating   Excel   97/2000/XP/2003   and
+OpenOffice    Calc   compatible     spreadsheets.     pyExcelerator     has
+full-blown   support   for  UNICODE  in Excel and Calc spreadsheets, allows
+using variety of formatting features,   provides   interface   to  printing
+options   of   Excel   and OpenOffice  Calc.  pyExcelerator  contains  also
+Excel BIFF8 dumper and MS compound  documents  dumper.  Main  advantage  is
+possibility of generating Excel  spreadsheets  without  MS  Windows  and/or
+COM  servers.  The  only requirement -- Python 2.4a3 or higher.
+
+
+0x0001. Why?
+--------------------
+I  had need to generate .xls with UNICODE under FreeBSD.
+
+
+0x0002. Requirements.
+--------------------
+Python    2.4   up   and   running.   I've   tested   pyExcelerator   under
+Win32  (Python     compiled     with    MS    C    compiler    and    Intel
+C  compiler),    Win64-x86  (MS       C      compiler),   FreeBSD/i386 (GCC
+3.4.2),   FreeBSD/amd64   (GCC    3.4.2).    Fastest    was   Python  under
+FreeBSD/amd64.
+
+
+0x0003. Installation.
+--------------------
+As usually: python ./setup.py install
+
+
+0x0004. Documentation.
+--------------------
+In progress. At the present time you can use examples and sources (I hope
+I commented sources well and gave variables good names).
+
+
+0x0005. Extra features.
+--------------------
+See  ./tools/*.py.  You'll  find  there  BIFF8  dumper  and MS Compound doc
+dumper.  In  ./hrc  you  can take my python.hrc for Colorer plug-in for FAR
+manager.
+
+
+0x0006. Reporting bugs.
+--------------------
+Please! 
+
+
+0x0008. Future.
+--------------------
+Support for Esher layer and (maybe) charts.
+
+
+0x0009. Useful links.
+--------------------
+http://www.python.org    --
+                           Python's home.
+http://sf.net/pyXLWriter -- 
+                           port of the first version Spreadsheet-WriteExcel.
+                           This library can write only BIFF5/7 spreadsheets
+                           and therefore can't use UNICODE in spreadsheets.
+                           pyXLWriter however can write formulas with help
+                           of PLY. IMHO, PLY and ambiguous grammar used by
+                           author for formulas support are too power tools.
+                           But in this case power was equals to simplicity.
+                           I want overcome these restrictions and (strictly
+                           IMHO) misfeatures. 
+http://www.openoffice.org --
+                           OpenOffice home. 
+                           About 650 Mb sources -- the best teachers.
+
+0x000A. Legality.
+--------------------
+With  help  from  lawyers  pyExcelerator is protect by Russian Federation's
+laws  and  international  treaties and can be used iff you agreed following
+BSD-like agreement.
+
+ Copyright (C) 2005 Roman V. Kiseliov
+ All rights reserved.
+ 
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+ 
+ 1. Redistributions of source code must retain the above copyright
+    notice, this list of conditions and the following disclaimer.
+ 
+ 2. Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in
+    the documentation and/or other materials provided with the
+    distribution.
+ 
+ 3. All advertising materials mentioning features or use of this
+    software must display the following acknowledgment:
+    "This product includes software developed by
+     Roman V. Kiseliov <roman@kiseliov.ru>."
+ 
+ 4. Redistributions of any form whatsoever must retain the following
+    acknowledgment:
+    "This product includes software developed by
+     Roman V. Kiseliov <roman@kiseliov.ru>."
+ 
+ THIS SOFTWARE IS PROVIDED BY Roman V. Kiseliov ``AS IS'' AND ANY
+ EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL Roman V. Kiseliov OR
+ ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+
+0xFFFF. Contacting author.
+--------------------
+Feel free to send me feedback and bug reports.
+
+Roman V. Kiseliov
+Russia
+Kursk
+Libknecht St., 4
+
++7(0712)56-09-83
+
+<roman@kiseliov.ru>
+subject *must* be 
+"pyExcelerator-bug" (without quotes)
+or 
+"pyExcelerator-feedback" (without quotes)
+

config/softs/pyExcelerator-0.6.3a.patched/THANKS.txt

@@ -0,0 +1,25 @@
+* My lovely wife Olya
+--------------------------
+* Evgeny Filatov 
+* John McNamara 
+* Daniel Rentz
+* John Machin
+* Ksenia Marasanova
+* Choe, Cheng-Dae
+* Jan ONDREJ
+* Andy Gimblett
+* Blais, Gerard C.
+* McNevin Michael B.
+* John Fouby
+* <your name>. Feel free to update my memory!
+--------------------------
+* Offspring
+* Lynkin Park
+--------------------------
+* Nescafe
+--------------------------
+* Python Team
+* FreeBSD Team
+* SF Team
+
+

config/softs/pyExcelerator-0.6.3a.patched/TODO.txt

@@ -0,0 +1,2 @@
+*Write documentation
+*BSE container for Esher layer

config/softs/pyExcelerator-0.6.3a.patched/examples/CVS/Entries

@@ -0,0 +1,32 @@
+/big-16Mb.py/1.3/Sun Mar 27 12:47:06 2005//
+/big-35Mb.py/1.3/Sun Mar 27 12:47:06 2005//
+/blanks.py/1.2/Fri Jul 22 08:22:26 2005//
+/col_width.py/1.3/Sun Mar 27 12:47:06 2005//
+/format.py/1.3/Sun Mar 27 12:47:06 2005//
+/image.py/1.3/Sun Mar 27 12:47:06 2005//
+/merged.py/1.3/Sun Mar 27 12:47:06 2005//
+/merged0.py/1.3/Sun Mar 27 12:47:06 2005//
+/merged1.py/1.1/Fri Jul 22 08:22:26 2005//
+/mini.py/1.3/Sun Mar 27 12:47:06 2005//
+/outline.py/1.3/Sun Mar 27 12:47:06 2005//
+/row_styles.py/1.3/Sun Mar 27 12:47:06 2005//
+/row_styles_empty.py/1.3/Sun Mar 27 12:47:06 2005//
+/sst.py/1.2/Fri Mar 25 07:31:12 2005//
+/unicode0.py/1.1/Sun Mar 27 12:47:06 2005//
+/unicode1.py/1.1/Sun Mar 27 12:47:06 2005//
+/unicode2.py/1.1/Sun Mar 27 12:47:06 2005//
+/wsprops.py/1.3/Sun Mar 27 12:47:06 2005//
+/xls2csv.py/1.1/Thu May 19 09:27:42 2005//
+/xls2html.py/1.1/Thu May 19 09:27:42 2005//
+/xls2txt.py/1.3/Thu May 19 09:27:42 2005//
+/python.bmp/1.1/Tue Jul 19 18:58:44 2005/-kb/
+/formula_names.py/1.1/Thu Aug 11 08:53:48 2005//
+/parse-fmla.py/1.1/Wed Aug 10 21:08:02 2005//
+/dates.py/1.1/Wed Jul 20 07:24:10 2005//
+/num_formats.py/1.1/Wed Jul 20 07:24:10 2005//
+/numbers.py/1.1/Wed Jul 20 07:24:10 2005//
+/formulas.py/1.4/Wed Oct 26 07:44:24 2005//
+/hyperlinks.py/1.1/Wed Oct 26 07:44:24 2005//
+/panes.py/1.1/Wed Oct 26 07:44:24 2005//
+/protection.py/1.1/Wed Oct 26 07:44:24 2005//
+D

config/softs/pyExcelerator-0.6.3a.patched/examples/CVS/Entries.Extra

@@ -0,0 +1,31 @@
+/big-16Mb.py////*///
+/big-35Mb.py////*///
+/blanks.py////*///
+/col_width.py////*///
+/format.py////*///
+/image.py////*///
+/merged.py////*///
+/merged0.py////*///
+/merged1.py////*///
+/mini.py////*///
+/outline.py////*///
+/row_styles.py////*///
+/row_styles_empty.py////*///
+/sst.py////*///
+/unicode0.py////*///
+/unicode1.py////*///
+/unicode2.py////*///
+/wsprops.py////*///
+/xls2csv.py////*///
+/xls2html.py////*///
+/xls2txt.py////*///
+/python.bmp////*///
+/formula_names.py////*///
+/parse-fmla.py////*///
+/dates.py////*///
+/num_formats.py////*///
+/numbers.py////*///
+/formulas.py////*///
+/hyperlinks.py////*///
+/panes.py////*///
+/protection.py////*///

config/softs/pyExcelerator-0.6.3a.patched/examples/CVS/Entries.Extra.Old

@@ -0,0 +1,31 @@
+/big-16Mb.py////*///
+/big-35Mb.py////*///
+/blanks.py////*///
+/col_width.py////*///
+/format.py////*///
+/image.py////*///
+/merged.py////*///
+/merged0.py////*///
+/merged1.py////*///
+/mini.py////*///
+/outline.py////*///
+/row_styles.py////*///
+/row_styles_empty.py////*///
+/sst.py////*///
+/unicode0.py////*///
+/unicode1.py////*///
+/unicode2.py////*///
+/wsprops.py////*///
+/xls2csv.py////*///
+/xls2html.py////*///
+/xls2txt.py////*///
+/python.bmp////*///
+/formula_names.py////*///
+/parse-fmla.py////*///
+/dates.py////*///
+/formulas.py////*///
+/num_formats.py////*///
+/numbers.py////*///
+/hyperlinks.py////*///
+/panes.py////*///
+/protection.py////*///

config/softs/pyExcelerator-0.6.3a.patched/examples/CVS/Entries.Old

@@ -0,0 +1,32 @@
+/big-16Mb.py/1.3/Sun Mar 27 12:47:06 2005//
+/big-35Mb.py/1.3/Sun Mar 27 12:47:06 2005//
+/blanks.py/1.2/Fri Jul 22 08:22:26 2005//
+/col_width.py/1.3/Sun Mar 27 12:47:06 2005//
+/format.py/1.3/Sun Mar 27 12:47:06 2005//
+/image.py/1.3/Sun Mar 27 12:47:06 2005//
+/merged.py/1.3/Sun Mar 27 12:47:06 2005//
+/merged0.py/1.3/Sun Mar 27 12:47:06 2005//
+/merged1.py/1.1/Fri Jul 22 08:22:26 2005//
+/mini.py/1.3/Sun Mar 27 12:47:06 2005//
+/outline.py/1.3/Sun Mar 27 12:47:06 2005//
+/row_styles.py/1.3/Sun Mar 27 12:47:06 2005//
+/row_styles_empty.py/1.3/Sun Mar 27 12:47:06 2005//
+/sst.py/1.2/Fri Mar 25 07:31:12 2005//
+/unicode0.py/1.1/Sun Mar 27 12:47:06 2005//
+/unicode1.py/1.1/Sun Mar 27 12:47:06 2005//
+/unicode2.py/1.1/Sun Mar 27 12:47:06 2005//
+/wsprops.py/1.3/Sun Mar 27 12:47:06 2005//
+/xls2csv.py/1.1/Thu May 19 09:27:42 2005//
+/xls2html.py/1.1/Thu May 19 09:27:42 2005//
+/xls2txt.py/1.3/Thu May 19 09:27:42 2005//
+/python.bmp/1.1/Tue Jul 19 18:58:44 2005/-kb/
+/formula_names.py/1.1/Thu Aug 11 08:53:48 2005//
+/parse-fmla.py/1.1/Wed Aug 10 21:08:02 2005//
+/dates.py/1.1/Wed Jul 20 07:24:10 2005//
+/formulas.py/1.3/Sun Aug 14 06:40:22 2005//
+/num_formats.py/1.1/Wed Jul 20 07:24:10 2005//
+/numbers.py/1.1/Wed Jul 20 07:24:10 2005//
+/hyperlinks.py/0/dummy timestamp//
+/panes.py/0/dummy timestamp//
+/protection.py/0/dummy timestamp//
+D

config/softs/pyExcelerator-0.6.3a.patched/examples/CVS/Repository

@@ -0,0 +1 @@
+pyExcelerator/examples

config/softs/pyExcelerator-0.6.3a.patched/examples/CVS/Root

@@ -0,0 +1 @@
+:ext:rvk@cvs.sf.net:/cvsroot/pyexcelerator

config/softs/pyExcelerator-0.6.3a.patched/examples/big-16Mb.py

@@ -0,0 +1,37 @@
+#!/usr/bin/env python
+# tries stress SST, SAT and MSAT
+__rev_id__ = """$Id: big-16Mb.py,v 1.3 2005/03/27 12:47:06 rvk Exp $"""
+
+
+from time import *
+from pyExcelerator.Workbook import *
+from pyExcelerator.Style import *
+
+style = XFStyle()
+
+wb = Workbook()
+ws0 = wb.add_sheet('0')
+
+colcount = 200 + 1
+rowcount = 6000 + 1
+
+t0 = time()
+print "\nstart: %s" % ctime(t0)
+
+print "Filling..."
+for col in xrange(colcount):
+    print "[%d]" % col, 
+    for row in xrange(rowcount):
+        #ws0.write(row, col, "BIG(%d, %d)" % (row, col))
+        ws0.write(row, col, "BIG")
+
+t1 = time() - t0
+print "\nsince starting elapsed %.2f s" % (t1)
+
+print "Storing..."
+wb.save('big-16Mb.xls')
+
+t2 = time() - t0
+print "since starting elapsed %.2f s" % (t2)
+
+

config/softs/pyExcelerator-0.6.3a.patched/examples/big-35Mb.py

@@ -0,0 +1,36 @@
+#!/usr/bin/env python
+# tries stress SST, SAT and MSAT
+__rev_id__ = """$Id: big-35Mb.py,v 1.3 2005/03/27 12:47:06 rvk Exp $"""
+
+
+from time import *
+from pyExcelerator import *
+
+style = XFStyle()
+
+wb = Workbook()
+ws0 = wb.add_sheet('0')
+
+colcount = 200 + 1
+rowcount = 6000 + 1
+
+t0 = time()
+print "\nstart: %s" % ctime(t0)
+
+print "Filling..."
+for col in xrange(colcount):
+    print "[%d]" % col, 
+    for row in xrange(rowcount):
+        ws0.write(row, col, "BIG(%d, %d)" % (row, col))
+        #ws0.write(row, col, "BIG")
+
+t1 = time() - t0
+print "\nsince starting elapsed %.2f s" % (t1)
+
+print "Storing..."
+wb.save('big-35Mb.xls')
+
+t2 = time() - t0
+print "since starting elapsed %.2f s" % (t2)
+
+

config/softs/pyExcelerator-0.6.3a.patched/examples/blanks.py

@@ -0,0 +1,39 @@
+#!/usr/bin/env python
+# -*- coding: windows-1251 -*-
+# Copyright (C) 2005 Kiseliov Roman
+
+__rev_id__ = """$Id: blanks.py,v 1.2 2005/07/22 08:22:26 rvk Exp $"""
+
+
+from pyExcelerator import *
+
+font0 = Font()
+font0.name = 'Times New Roman'
+font0.struck_out = True
+font0.bold = True
+
+style0 = XFStyle()
+style0.font = font0
+
+
+wb = Workbook()
+ws0 = wb.add_sheet('0')
+
+ws0.write(1, 1, 'Test', style0)
+
+for i in range(0, 0x53):
+    borders = Borders()
+    borders.left = i
+    borders.right = i
+    borders.top = i
+    borders.bottom = i
+
+    style = XFStyle()
+    style.borders = borders
+
+    ws0.write(i, 2, '', style)
+    ws0.write(i, 3, hex(i), style0)
+
+ws0.write_merge(5, 8, 6, 10, "")
+
+wb.save('blanks.xls')

config/softs/pyExcelerator-0.6.3a.patched/examples/col_width.py

@@ -0,0 +1,19 @@
+#!/usr/bin/env python
+# -*- coding: windows-1251 -*-
+# Copyright (C) 2005 Kiseliov Roman
+__rev_id__ = """$Id: col_width.py,v 1.3 2005/03/27 12:47:06 rvk Exp $"""
+
+
+from pyExcelerator import *
+
+w = Workbook()
+ws = w.add_sheet('Hey, Dude')
+
+for i in range(6, 80):
+    fnt = Font()
+    fnt.height = i*20
+    style = XFStyle()
+    style.font = fnt
+    ws.write(1, i, 'Test')
+    ws.col(i).width = 0x0d00 + i
+w.save('col_width.xls')

config/softs/pyExcelerator-0.6.3a.patched/examples/dates.py

@@ -0,0 +1,39 @@
+#!/usr/bin/env python
+# -*- coding: windows-1251 -*-
+# Copyright (C) 2005 Kiseliov Roman
+__rev_id__ = """$Id: dates.py,v 1.1 2005/07/20 07:24:11 rvk Exp $"""
+
+
+from pyExcelerator import *
+from datetime import datetime
+
+w = Workbook()
+ws = w.add_sheet('Hey, Dude')
+
+fmts = [
+    'M/D/YY',
+    'D-MMM-YY',
+    'D-MMM',
+    'MMM-YY',
+    'h:mm AM/PM',
+    'h:mm:ss AM/PM',
+    'h:mm',
+    'h:mm:ss',
+    'M/D/YY h:mm',
+    'mm:ss',
+    '[h]:mm:ss',
+    'mm:ss.0',
+]
+
+i = 0
+for fmt in fmts:
+    ws.write(i, 0, fmt)
+
+    style = XFStyle()
+    style.num_format_str = fmt
+
+    ws.write(i, 4, datetime.now(), style)
+
+    i += 1
+
+w.save('dates.xls')

config/softs/pyExcelerator-0.6.3a.patched/examples/format.py

@@ -0,0 +1,41 @@
+#!/usr/bin/env python
+# -*- coding: windows-1251 -*-
+# Copyright (C) 2005 Kiseliov Roman
+
+__rev_id__ = """$Id: format.py,v 1.3 2005/03/27 12:47:06 rvk Exp $"""
+
+
+from pyExcelerator import *
+
+font0 = Font()
+font0.name = 'Times New Roman'
+font0.struck_out = True
+font0.bold = True
+
+style0 = XFStyle()
+style0.font = font0
+
+
+wb = Workbook()
+ws0 = wb.add_sheet('0')
+
+ws0.write(1, 1, 'Test', style0)
+
+for i in range(0, 0x53):
+    fnt = Font()
+    fnt.name = 'Arial'
+    fnt.colour_index = i
+    fnt.outline = True
+
+    borders = Borders()
+    borders.left = i
+
+    style = XFStyle()
+    style.font = fnt
+    style.borders = borders
+
+    ws0.write(i, 2, 'colour', style)
+    ws0.write(i, 3, hex(i), style0)
+
+
+wb.save('format.xls')

config/softs/pyExcelerator-0.6.3a.patched/examples/formula_names.py

@@ -0,0 +1,18 @@
+#!/usr/bin/env python
+# -*- coding: windows-1251 -*-
+# Copyright (C) 2005 Kiseliov Roman
+__rev_id__ = """$Id: formula_names.py,v 1.1 2005/08/11 08:53:48 rvk Exp $"""
+
+
+from pyExcelerator import *
+
+w = Workbook()
+ws = w.add_sheet('F')
+
+i = 0
+for n in sorted(ExcelMagic.std_func_by_name):
+    ws.write(i, 0, n)
+    ws.write(i, 3, Formula(n + "($A$1)"))
+    i += 1
+
+w.save('formula_names.xls')

config/softs/pyExcelerator-0.6.3a.patched/examples/formulas.py

@@ -0,0 +1,49 @@
+#!/usr/bin/env python
+# -*- coding: windows-1251 -*-
+# Copyright (C) 2005 Kiseliov Roman
+__rev_id__ = """$Id: formulas.py,v 1.4 2005/10/26 07:44:24 rvk Exp $"""
+
+
+from pyExcelerator import *
+
+w = Workbook()
+ws = w.add_sheet('F')
+
+ws.write(0, 0, Formula("-(1+1)"))
+ws.write(1, 0, Formula("-(1+1)/(-2-2)"))
+ws.write(2, 0, Formula("-(134.8780789+1)"))
+ws.write(3, 0, Formula("-(134.8780789e-10+1)"))
+ws.write(4, 0, Formula("-1/(1+1)+9344"))
+
+ws.write(0, 1, Formula("-(1+1)"))
+ws.write(1, 1, Formula("-(1+1)/(-2-2)"))
+ws.write(2, 1, Formula("-(134.8780789+1)"))
+ws.write(3, 1, Formula("-(134.8780789e-10+1)"))
+ws.write(4, 1, Formula("-1/(1+1)+9344"))
+
+ws.write(0, 2, Formula("A1*B1"))
+ws.write(1, 2, Formula("A2*B2"))
+ws.write(2, 2, Formula("A3*B3"))
+ws.write(3, 2, Formula("A4*B4*sin(pi()/4)"))
+ws.write(4, 2, Formula("A5%*B5*pi()/1000"))
+
+##############
+## NOTE: parameters are separated by semicolon!!!
+##############
+
+
+ws.write(5, 2, Formula("C1+C2+C3+C4+C5/(C1+C2+C3+C4/(C1+C2+C3+C4/(C1+C2+C3+C4)+C5)+C5)-20.3e-2"))
+ws.write(5, 3, Formula("C1^2"))
+ws.write(6, 2, Formula("SUM(C1;C2;;;;;C3;;;C4)"))
+ws.write(6, 3, Formula("SUM($A$1:$C$5)"))
+
+ws.write(7, 0, Formula('"lkjljllkllkl"'))
+ws.write(7, 1, Formula('"yuyiyiyiyi"'))
+ws.write(7, 2, Formula('A8 & B8 & A8'))
+ws.write(8, 2, Formula('now()'))
+
+ws.write(10, 2, Formula('TRUE'))
+ws.write(11, 2, Formula('FALSE'))
+ws.write(12, 3, Formula('IF(A1>A2;3;"hkjhjkhk")'))
+
+w.save('formulas.xls')

config/softs/pyExcelerator-0.6.3a.patched/examples/hyperlinks.py

@@ -0,0 +1,30 @@
+#!/usr/bin/env python
+# -*- coding: windows-1251 -*-
+# Copyright (C) 2005 Kiseliov Roman
+__rev_id__ = """$Id: hyperlinks.py,v 1.1 2005/10/26 07:44:24 rvk Exp $"""
+
+
+from pyExcelerator import *
+
+f = Font()
+f.height = 20*72
+f.name = 'Verdana'
+f.bold = True
+f.underline = Font.UNDERLINE_DOUBLE
+f.colour_index = 4
+
+h_style = XFStyle()
+h_style.font = f
+
+w = Workbook()
+ws = w.add_sheet('F')
+
+##############
+## NOTE: parameters are separated by semicolon!!!
+##############
+
+n = "HYPERLINK"
+ws.write_merge(1, 1, 1, 10, Formula(n + '("http://www.irs.gov/pub/irs-pdf/f1000.pdf";"f1000.pdf")'), h_style)
+ws.write_merge(2, 2, 2, 25, Formula(n + '("mailto:roman.kiseliov@gmail.com?subject=pyExcelerator-feedback&Body=Hello,%20Roman!";"pyExcelerator-feedback")'), h_style)
+
+w.save("hyperlinks.xls")

config/softs/pyExcelerator-0.6.3a.patched/examples/image.py

@@ -0,0 +1,15 @@
+#!/usr/bin/env python
+# -*- coding: windows-1251 -*-
+# Copyright (C) 2005 Kiseliov Roman
+
+__rev_id__ = """$Id: image.py,v 1.3 2005/03/27 12:47:06 rvk Exp $"""
+
+
+from pyExcelerator import *
+
+w = Workbook()
+ws = w.add_sheet('Image')
+ws.insert_bitmap('python.bmp', 2, 2)
+ws.insert_bitmap('python.bmp', 10, 2)
+
+w.save('image.xls')

config/softs/pyExcelerator-0.6.3a.patched/examples/merged.py

@@ -0,0 +1,42 @@
+#!/usr/bin/env python
+# -*- coding: windows-1251 -*-
+# Copyright (C) 2005 Kiseliov Roman
+
+__rev_id__ = """$Id: merged.py,v 1.3 2005/03/27 12:47:06 rvk Exp $"""
+
+
+from pyExcelerator import *
+
+fnt = Font()
+fnt.name = 'Arial'
+fnt.colour_index = 4
+fnt.bold = True
+
+borders = Borders()
+borders.left = 6
+borders.right = 6
+borders.top = 6
+borders.bottom = 6
+
+al = Alignment()
+al.horz = Alignment.HORZ_CENTER
+al.vert = Alignment.VERT_CENTER
+
+style = XFStyle()
+style.font = fnt
+style.borders = borders
+style.alignment = al
+
+
+wb = Workbook()
+ws0 = wb.add_sheet('sheet0')
+ws1 = wb.add_sheet('sheet1')
+ws2 = wb.add_sheet('sheet2')
+
+for i in range(0, 0x200, 2):
+    ws0.write_merge(i, i+1, 1, 5, 'test %d' % i, style)
+    ws1.write_merge(i, i, 1, 7, 'test %d' % i, style)
+    ws2.write_merge(i, i+1, 1, 7 + (i%10), 'test %d' % i, style)
+
+
+wb.save('merged.xls')

config/softs/pyExcelerator-0.6.3a.patched/examples/merged0.py

@@ -0,0 +1,32 @@
+#!/usr/bin/env python
+# -*- coding: windows-1251 -*-
+# Copyright (C) 2005 Kiseliov Roman
+__rev_id__ = """$Id: merged0.py,v 1.3 2005/03/27 12:47:06 rvk Exp $"""
+
+
+from pyExcelerator import *
+
+wb = Workbook()
+ws0 = wb.add_sheet('sheet0')
+
+
+fnt = Font()
+fnt.name = 'Arial'
+fnt.colour_index = 4
+fnt.bold = True
+
+borders = Borders()
+borders.left = 6
+borders.right = 6
+borders.top = 6
+borders.bottom = 6
+
+style = XFStyle()
+style.font = fnt
+style.borders = borders
+
+ws0.write_merge(3, 3, 1, 5, 'test1', style)
+ws0.write_merge(4, 10, 1, 5, 'test2', style)
+ws0.col(1).width = 0x0d00
+
+wb.save('merged0.xls')

config/softs/pyExcelerator-0.6.3a.patched/examples/merged1.py

@@ -0,0 +1,104 @@
+#!/usr/bin/env python
+# -*- coding: windows-1251 -*-
+# Copyright (C) 2005 Kiseliov Roman
+__rev_id__ = """$Id: merged1.py,v 1.1 2005/07/22 08:22:26 rvk Exp $"""
+
+
+from pyExcelerator import *
+
+wb = Workbook()
+ws0 = wb.add_sheet('sheet0')
+
+fnt1 = Font()
+fnt1.name = 'Verdana'
+fnt1.bold = True
+fnt1.height = 18*0x14
+
+pat1 = Pattern()
+pat1.pattern = Pattern.SOLID_PATTERN
+pat1.pattern_fore_colour = 0x16
+
+brd1 = Borders()
+brd1.left = 0x06
+brd1.right = 0x06
+brd1.top = 0x06
+brd1.bottom = 0x06
+
+fnt2 = Font()
+fnt2.name = 'Verdana'
+fnt2.bold = True
+fnt2.height = 14*0x14
+
+brd2 = Borders()
+brd2.left = 0x01
+brd2.right = 0x01
+brd2.top = 0x01
+brd2.bottom = 0x01
+
+pat2 = Pattern()
+pat2.pattern = Pattern.SOLID_PATTERN
+pat2.pattern_fore_colour = 0x01F
+
+fnt3 = Font()
+fnt3.name = 'Verdana'
+fnt3.bold = True
+fnt3.italic = True
+fnt3.height = 12*0x14
+
+brd3 = Borders()
+brd3.left = 0x07
+brd3.right = 0x07
+brd3.top = 0x07
+brd3.bottom = 0x07
+
+fnt4 = Font()
+
+al1 = Alignment()
+al1.horz = Alignment.HORZ_CENTER
+al1.vert = Alignment.VERT_CENTER
+
+al2 = Alignment()
+al2.horz = Alignment.HORZ_RIGHT
+al2.vert = Alignment.VERT_CENTER
+
+al3 = Alignment()
+al3.horz = Alignment.HORZ_LEFT
+al3.vert = Alignment.VERT_CENTER
+
+style1 = XFStyle()
+style1.font = fnt1
+style1.alignment = al1
+style1.pattern = pat1
+style1.borders = brd1
+
+style2 = XFStyle()
+style2.font = fnt2
+style2.alignment = al1
+style2.pattern = pat2
+style2.borders = brd2
+
+style3 = XFStyle()
+style3.font = fnt3
+style3.alignment = al1
+style3.pattern = pat2
+style3.borders = brd3
+
+price_style = XFStyle()
+price_style.font = fnt4
+price_style.alignment = al2
+price_style.borders = brd3
+price_style.num_format_str = '_(#,##0.00_) "money"'
+
+ware_style = XFStyle()
+ware_style.font = fnt4
+ware_style.alignment = al3
+ware_style.borders = brd3
+
+
+ws0.merge(3, 3, 1, 5, style1)
+ws0.merge(4, 10, 1, 6, style2)
+ws0.merge(14, 16, 1, 7, style3)
+ws0.col(1).width = 0x0d00
+
+
+wb.save('merged1.xls')

config/softs/pyExcelerator-0.6.3a.patched/examples/mini.py

@@ -0,0 +1,11 @@
+#!/usr/bin/env python
+# -*- coding: windows-1251 -*-
+# Copyright (C) 2005 Kiseliov Roman
+__rev_id__ = """$Id: mini.py,v 1.3 2005/03/27 12:47:06 rvk Exp $"""
+
+
+from pyExcelerator import *
+
+w = Workbook()
+ws = w.add_sheet('Hey, Dude')
+w.save('mini.xls')

config/softs/pyExcelerator-0.6.3a.patched/examples/num_formats.py

@@ -0,0 +1,62 @@
+#!/usr/bin/env python
+# -*- coding: windows-1251 -*-
+# Copyright (C) 2005 Kiseliov Roman
+__rev_id__ = """$Id: num_formats.py,v 1.1 2005/07/20 07:24:11 rvk Exp $"""
+
+
+from pyExcelerator import *
+
+w = Workbook()
+ws = w.add_sheet('Hey, Dude')
+
+fmts = [
+    'general',
+    '0',
+    '0.00',
+    '#,##0',
+    '#,##0.00',
+    '"$"#,##0_);("$"#,##',
+    '"$"#,##0_);[Red]("$"#,##',
+    '"$"#,##0.00_);("$"#,##',
+    '"$"#,##0.00_);[Red]("$"#,##',
+    '0%',
+    '0.00%',
+    '0.00E+00',
+    '# ?/?',
+    '# ??/??',
+    'M/D/YY',
+    'D-MMM-YY',
+    'D-MMM',
+    'MMM-YY',
+    'h:mm AM/PM',
+    'h:mm:ss AM/PM',
+    'h:mm',
+    'h:mm:ss',
+    'M/D/YY h:mm',
+    '_(#,##0_);(#,##0)',
+    '_(#,##0_);[Red](#,##0)',
+    '_(#,##0.00_);(#,##0.00)',
+    '_(#,##0.00_);[Red](#,##0.00)',
+    '_("$"* #,##0_);_("$"* (#,##0);_("$"* "-"_);_(@_)',
+    '_(* #,##0_);_(* (#,##0);_(* "-"_);_(@_)',
+    '_("$"* #,##0.00_);_("$"* (#,##0.00);_("$"* "-"??_);_(@_)',
+    '_(* #,##0.00_);_(* (#,##0.00);_(* "-"??_);_(@_)',
+    'mm:ss',
+    '[h]:mm:ss',
+    'mm:ss.0',
+    '##0.0E+0',
+    '@'   
+]
+
+i = 0
+for fmt in fmts:
+    ws.write(i, 0, fmt)
+
+    style = XFStyle()
+    style.num_format_str = fmt
+
+    ws.write(i, 4, -1278.9078, style)
+
+    i += 1
+
+w.save('num_formats.xls')

config/softs/pyExcelerator-0.6.3a.patched/examples/numbers.py

@@ -0,0 +1,27 @@
+#!/usr/bin/env python
+# -*- coding: windows-1251 -*-
+# Copyright (C) 2005 Kiseliov Roman
+__rev_id__ = """$Id: numbers.py,v 1.1 2005/07/20 07:24:11 rvk Exp $"""
+
+
+from pyExcelerator import *
+
+w = Workbook()
+ws = w.add_sheet('Hey, Dude')
+
+ws.write(0, 0, 1)
+ws.write(1, 0, 1.23)
+ws.write(2, 0, 12345678)
+ws.write(3, 0, 123456.78)
+
+ws.write(0, 1, -1)
+ws.write(1, 1, -1.23)
+ws.write(2, 1, -12345678)
+ws.write(3, 1, -123456.78)
+
+ws.write(0, 2, -17867868678687.0)
+ws.write(1, 2, -1.23e-5)
+ws.write(2, 2, -12345678.90780980)
+ws.write(3, 2, -123456.78)
+
+w.save('numbers.xls')

config/softs/pyExcelerator-0.6.3a.patched/examples/outline.py

@@ -0,0 +1,115 @@
+#!/usr/bin/env python
+# -*- coding: windows-1251 -*-
+# Copyright (C) 2005 Kiseliov Roman
+__rev_id__ = """$Id: outline.py,v 1.3 2005/03/27 12:47:06 rvk Exp $"""
+
+
+from pyExcelerator import *
+
+fnt = Font()
+fnt.name = 'Arial'
+fnt.colour_index = 4
+fnt.bold = True
+
+borders = Borders()
+borders.left = 6
+borders.right = 6
+borders.top = 6
+borders.bottom = 6
+
+style = XFStyle()
+style.font = fnt
+style.borders = borders
+
+wb = Workbook()
+
+ws0 = wb.add_sheet('Rows Outline')
+
+ws0.write_merge(1, 1, 1, 5, 'test 1', style)
+ws0.write_merge(2, 2, 1, 4, 'test 1', style)
+ws0.write_merge(3, 3, 1, 3, 'test 2', style)
+ws0.write_merge(4, 4, 1, 4, 'test 1', style)
+ws0.write_merge(5, 5, 1, 4, 'test 3', style)
+ws0.write_merge(6, 6, 1, 5, 'test 1', style)
+ws0.write_merge(7, 7, 1, 5, 'test 4', style)
+ws0.write_merge(8, 8, 1, 4, 'test 1', style)
+ws0.write_merge(9, 9, 1, 3, 'test 5', style)
+
+ws0.row(1).level = 1
+ws0.row(2).level = 1
+ws0.row(3).level = 2
+ws0.row(4).level = 2
+ws0.row(5).level = 2
+ws0.row(6).level = 2
+ws0.row(7).level = 2
+ws0.row(8).level = 1
+ws0.row(9).level = 1
+
+
+ws1 = wb.add_sheet('Columns Outline')
+
+ws1.write_merge(1, 1, 1, 5, 'test 1', style)
+ws1.write_merge(2, 2, 1, 4, 'test 1', style)
+ws1.write_merge(3, 3, 1, 3, 'test 2', style)
+ws1.write_merge(4, 4, 1, 4, 'test 1', style)
+ws1.write_merge(5, 5, 1, 4, 'test 3', style)
+ws1.write_merge(6, 6, 1, 5, 'test 1', style)
+ws1.write_merge(7, 7, 1, 5, 'test 4', style)
+ws1.write_merge(8, 8, 1, 4, 'test 1', style)
+ws1.write_merge(9, 9, 1, 3, 'test 5', style)
+
+ws1.col(1).level = 1
+ws1.col(2).level = 1
+ws1.col(3).level = 2
+ws1.col(4).level = 2
+ws1.col(5).level = 2
+ws1.col(6).level = 2
+ws1.col(7).level = 2
+ws1.col(8).level = 1
+ws1.col(9).level = 1
+
+
+ws2 = wb.add_sheet('Rows and Columns Outline')
+
+ws2.write_merge(1, 1, 1, 5, 'test 1', style)
+ws2.write_merge(2, 2, 1, 4, 'test 1', style)
+ws2.write_merge(3, 3, 1, 3, 'test 2', style)
+ws2.write_merge(4, 4, 1, 4, 'test 1', style)
+ws2.write_merge(5, 5, 1, 4, 'test 3', style)
+ws2.write_merge(6, 6, 1, 5, 'test 1', style)
+ws2.write_merge(7, 7, 1, 5, 'test 4', style)
+ws2.write_merge(8, 8, 1, 4, 'test 1', style)
+ws2.write_merge(9, 9, 1, 3, 'test 5', style)
+
+ws2.row(1).level = 1
+ws2.row(2).level = 1
+ws2.row(3).level = 2
+ws2.row(4).level = 2
+ws2.row(5).level = 2
+ws2.row(6).level = 2
+ws2.row(7).level = 2
+ws2.row(8).level = 1
+ws2.row(9).level = 1
+
+ws2.write_merge(1, 1, 1, 5, 'test 1', style)
+ws2.write_merge(2, 2, 1, 4, 'test 1', style)
+ws2.write_merge(3, 3, 1, 3, 'test 2', style)
+ws2.write_merge(4, 4, 1, 4, 'test 1', style)
+ws2.write_merge(5, 5, 1, 4, 'test 3', style)
+ws2.write_merge(6, 6, 1, 5, 'test 1', style)
+ws2.write_merge(7, 7, 1, 5, 'test 4', style)
+ws2.write_merge(8, 8, 1, 4, 'test 1', style)
+ws2.write_merge(9, 9, 1, 3, 'test 5', style)
+
+ws2.col(1).level = 1
+ws2.col(2).level = 1
+ws2.col(3).level = 2
+ws2.col(4).level = 2
+ws2.col(5).level = 2
+ws2.col(6).level = 2
+ws2.col(7).level = 2
+ws2.col(8).level = 1
+ws2.col(9).level = 1
+
+
+wb.save('outline.xls')

config/softs/pyExcelerator-0.6.3a.patched/examples/panes.py

@@ -0,0 +1,60 @@
+#!/usr/bin/env python
+# -*- coding: windows-1251 -*-
+# Copyright (C) 2005 Kiseliov Roman
+__rev_id__ = """$Id: panes.py,v 1.1 2005/10/26 07:44:24 rvk Exp $"""
+
+
+from pyExcelerator import *
+
+w = Workbook()
+ws1 = w.add_sheet('sheet 1')
+ws2 = w.add_sheet('sheet 2')
+ws3 = w.add_sheet('sheet 3')
+ws4 = w.add_sheet('sheet 4')
+ws5 = w.add_sheet('sheet 5')
+ws6 = w.add_sheet('sheet 6')
+
+for i in range(0x100):
+    ws1.write(i/0x10, i%0x10, i)
+
+for i in range(0x100):
+    ws2.write(i/0x10, i%0x10, i)
+
+for i in range(0x100):
+    ws3.write(i/0x10, i%0x10, i)
+
+for i in range(0x100):
+    ws4.write(i/0x10, i%0x10, i)
+
+for i in range(0x100):
+    ws5.write(i/0x10, i%0x10, i)
+
+for i in range(0x100):
+    ws6.write(i/0x10, i%0x10, i)
+
+ws1.panes_frozen = True
+ws1.horz_split_pos = 2
+
+ws2.panes_frozen = True
+ws2.vert_split_pos = 2
+
+ws3.panes_frozen = True
+ws3.horz_split_pos = 1
+ws3.vert_split_pos = 1
+
+ws4.panes_frozen = False
+ws4.horz_split_pos = 12
+ws4.horz_split_first_visible = 2
+
+ws5.panes_frozen = False
+ws5.vert_split_pos = 40
+ws4.vert_split_first_visible = 2
+
+ws6.panes_frozen = False
+ws6.horz_split_pos = 12
+ws4.horz_split_first_visible = 2
+ws6.vert_split_pos = 40
+ws4.vert_split_first_visible = 2
+
+w.save('panes.xls')
+

config/softs/pyExcelerator-0.6.3a.patched/examples/parse-fmla.py

@@ -0,0 +1,12 @@
+from pyExcelerator import ExcelFormulaParser, ExcelFormula
+import sys
+
+f = ExcelFormula.Formula(
+""" -((1.80 + 2.898 * 1)/(1.80 + 2.898))*
+AVERAGE((1.80 + 2.898 * 1)/(1.80 + 2.898); 
+        (1.80 + 2.898 * 1)/(1.80 + 2.898); 
+        (1.80 + 2.898 * 1)/(1.80 + 2.898)) + 
+SIN(PI()/4)""")
+
+#for t in f.rpn():
+#    print "%15s %15s" % (ExcelFormulaParser.PtgNames[t[0]], t[1])

config/softs/pyExcelerator-0.6.3a.patched/examples/protection.py

@@ -0,0 +1,136 @@
+#!/usr/bin/env python
+# -*- coding: windows-1251 -*-
+# Copyright (C) 2005 Kiseliov Roman
+__rev_id__ = """$Id: protection.py,v 1.1 2005/10/26 07:44:24 rvk Exp $"""
+
+
+from pyExcelerator import *
+
+fnt = Font()
+fnt.name = 'Arial'
+fnt.colour_index = 4
+fnt.bold = True
+
+borders = Borders()
+borders.left = 6
+borders.right = 6
+borders.top = 6
+borders.bottom = 6
+
+style = XFStyle()
+style.font = fnt
+style.borders = borders
+
+wb = Workbook()
+
+ws0 = wb.add_sheet('Rows Outline')
+
+ws0.write_merge(1, 1, 1, 5, 'test 1', style)
+ws0.write_merge(2, 2, 1, 4, 'test 1', style)
+ws0.write_merge(3, 3, 1, 3, 'test 2', style)
+ws0.write_merge(4, 4, 1, 4, 'test 1', style)
+ws0.write_merge(5, 5, 1, 4, 'test 3', style)
+ws0.write_merge(6, 6, 1, 5, 'test 1', style)
+ws0.write_merge(7, 7, 1, 5, 'test 4', style)
+ws0.write_merge(8, 8, 1, 4, 'test 1', style)
+ws0.write_merge(9, 9, 1, 3, 'test 5', style)
+
+ws0.row(1).level = 1
+ws0.row(2).level = 1
+ws0.row(3).level = 2
+ws0.row(4).level = 2
+ws0.row(5).level = 2
+ws0.row(6).level = 2
+ws0.row(7).level = 2
+ws0.row(8).level = 1
+ws0.row(9).level = 1
+
+
+ws1 = wb.add_sheet('Columns Outline')
+
+ws1.write_merge(1, 1, 1, 5, 'test 1', style)
+ws1.write_merge(2, 2, 1, 4, 'test 1', style)
+ws1.write_merge(3, 3, 1, 3, 'test 2', style)
+ws1.write_merge(4, 4, 1, 4, 'test 1', style)
+ws1.write_merge(5, 5, 1, 4, 'test 3', style)
+ws1.write_merge(6, 6, 1, 5, 'test 1', style)
+ws1.write_merge(7, 7, 1, 5, 'test 4', style)
+ws1.write_merge(8, 8, 1, 4, 'test 1', style)
+ws1.write_merge(9, 9, 1, 3, 'test 5', style)
+
+ws1.col(1).level = 1
+ws1.col(2).level = 1
+ws1.col(3).level = 2
+ws1.col(4).level = 2
+ws1.col(5).level = 2
+ws1.col(6).level = 2
+ws1.col(7).level = 2
+ws1.col(8).level = 1
+ws1.col(9).level = 1
+
+
+ws2 = wb.add_sheet('Rows and Columns Outline')
+
+ws2.write_merge(1, 1, 1, 5, 'test 1', style)
+ws2.write_merge(2, 2, 1, 4, 'test 1', style)
+ws2.write_merge(3, 3, 1, 3, 'test 2', style)
+ws2.write_merge(4, 4, 1, 4, 'test 1', style)
+ws2.write_merge(5, 5, 1, 4, 'test 3', style)
+ws2.write_merge(6, 6, 1, 5, 'test 1', style)
+ws2.write_merge(7, 7, 1, 5, 'test 4', style)
+ws2.write_merge(8, 8, 1, 4, 'test 1', style)
+ws2.write_merge(9, 9, 1, 3, 'test 5', style)
+
+ws2.row(1).level = 1
+ws2.row(2).level = 1
+ws2.row(3).level = 2
+ws2.row(4).level = 2
+ws2.row(5).level = 2
+ws2.row(6).level = 2
+ws2.row(7).level = 2
+ws2.row(8).level = 1
+ws2.row(9).level = 1
+
+ws2.write_merge(1, 1, 1, 5, 'test 1', style)
+ws2.write_merge(2, 2, 1, 4, 'test 1', style)
+ws2.write_merge(3, 3, 1, 3, 'test 2', style)
+ws2.write_merge(4, 4, 1, 4, 'test 1', style)
+ws2.write_merge(5, 5, 1, 4, 'test 3', style)
+ws2.write_merge(6, 6, 1, 5, 'test 1', style)
+ws2.write_merge(7, 7, 1, 5, 'test 4', style)
+ws2.write_merge(8, 8, 1, 4, 'test 1', style)
+ws2.write_merge(9, 9, 1, 3, 'test 5', style)
+
+ws2.col(1).level = 1
+ws2.col(2).level = 1
+ws2.col(3).level = 2
+ws2.col(4).level = 2
+ws2.col(5).level = 2
+ws2.col(6).level = 2
+ws2.col(7).level = 2
+ws2.col(8).level = 1
+ws2.col(9).level = 1
+
+
+ws0.protect = True
+ws0.wnd_protect = True
+ws0.obj_protect = True
+ws0.scen_protect = True
+ws0.password = "123456"
+
+ws1.protect = True
+ws1.wnd_protect = True
+ws1.obj_protect = True
+ws1.scen_protect = True
+ws1.password = "abcdefghij"
+
+ws2.protect = True
+ws2.wnd_protect = True
+ws2.obj_protect = True
+ws2.scen_protect = True
+ws2.password = "ok"
+
+wb.protect = True
+wb.wnd_protect = True
+wb.obj_protect = True
+wb.save('protection.xls')

config/softs/pyExcelerator-0.6.3a.patched/examples/row_styles.py

@@ -0,0 +1,19 @@
+#!/usr/bin/env python
+# -*- coding: windows-1251 -*-
+# Copyright (C) 2005 Kiseliov Roman
+__rev_id__ = """$Id: row_styles.py,v 1.3 2005/03/27 12:47:06 rvk Exp $"""
+
+
+from pyExcelerator import *
+
+w = Workbook()
+ws = w.add_sheet('Hey, Dude')
+
+for i in range(6, 80):
+    fnt = Font()
+    fnt.height = i*20
+    style = XFStyle()
+    style.font = fnt
+    ws.write(i, 1, 'Test')
+    ws.row(i).set_style(style)
+w.save('row_styles.xls')

config/softs/pyExcelerator-0.6.3a.patched/examples/row_styles_empty.py

@@ -0,0 +1,18 @@
+#!/usr/bin/env python
+# -*- coding: windows-1251 -*-
+# Copyright (C) 2005 Kiseliov Roman
+__rev_id__ = """$Id: row_styles_empty.py,v 1.3 2005/03/27 12:47:06 rvk Exp $"""
+
+
+from pyExcelerator import *
+
+w = Workbook()
+ws = w.add_sheet('Hey, Dude')
+
+for i in range(6, 80):
+    fnt = Font()
+    fnt.height = i*20
+    style = XFStyle()
+    style.font = fnt
+    ws.row(i).set_style(style)
+w.save('row_styles_empty.xls')

config/softs/pyExcelerator-0.6.3a.patched/examples/sst.py

@@ -0,0 +1,54 @@
+#!/usr/bin/env python
+# -*- coding: windows-1251 -*-
+# Copyright (C) 2005 Kiseliov Roman
+__rev_id__ = """$Id: sst.py,v 1.2 2005/03/25 07:31:12 rvk Exp $"""
+
+
+from pyExcelerator import *
+
+font0 = Formatting.Font()
+font0.name = 'Arial'
+font1 = Formatting.Font()
+font1.name = 'Arial Cyr'
+font2 = Formatting.Font()
+font2.name = 'Times New Roman'
+font3 = Formatting.Font()
+font3.name = 'Courier New Cyr'
+
+num_format0 = '0.00000'
+num_format1 = '0.000000'
+num_format2 = '0.0000000'
+num_format3 = '0.00000000'
+
+st0 = XFStyle()
+st1 = XFStyle()
+st2 = XFStyle()
+st3 = XFStyle()
+st4 = XFStyle()
+
+st0.font = font0
+st0.num_format = num_format0
+
+st1.font = font1
+st1.num_format = num_format1
+
+st2.font = font2
+st2.num_format = num_format2
+
+st3.font = font3
+st3.num_format = num_format3
+
+wb = Workbook()
+
+wb.add_style(st0)
+wb.add_style(st1)
+wb.add_style(st2)
+wb.add_style(st3)
+
+ws0 = wb.add_sheet('0')
+ws0.write(0, 0, 'Olya'*0x4000, st0)
+
+#for i in range(0, 0x10):
+#    ws0.write(i, 2, ('%d'%i)*0x4000, st1)
+    
+wb.save('sst.xls')

config/softs/pyExcelerator-0.6.3a.patched/examples/unicode0.py

@@ -0,0 +1,16 @@
+#!/usr/bin/env python
+# -*- coding: windows-1251 -*-
+# Copyright (C) 2005 Kiseliov Roman
+__rev_id__ = """$Id: unicode0.py,v 1.1 2005/03/27 12:47:06 rvk Exp $"""
+
+
+from pyExcelerator import *
+
+w = Workbook()
+ws1 = w.add_sheet('cp1251')
+
+UnicodeUtils.DEFAULT_ENCODING = 'cp1251'
+ws1.write(0, 0, 'Îëÿ')
+
+w.save('unicode0.xls')
+

config/softs/pyExcelerator-0.6.3a.patched/examples/unicode1.py

@@ -0,0 +1,30 @@
+#!/usr/bin/env python
+# -*- coding: windows-1251 -*-
+# Copyright (C) 2005 Kiseliov Roman
+__rev_id__ = """$Id: unicode1.py,v 1.1 2005/03/27 12:47:06 rvk Exp $"""
+
+
+from pyExcelerator import *
+
+w = Workbook()
+ws1 = w.add_sheet(u'\N{GREEK SMALL LETTER ALPHA}\N{GREEK SMALL LETTER BETA}\N{GREEK SMALL LETTER GAMMA}')
+
+ws1.write(0, 0, u'\N{GREEK SMALL LETTER ALPHA}\N{GREEK SMALL LETTER BETA}\N{GREEK SMALL LETTER GAMMA}')
+ws1.write(1, 1, u'\N{GREEK SMALL LETTER DELTA}x = 1 + \N{GREEK SMALL LETTER DELTA}')
+
+ws1.write(2,0, u'A\u2262\u0391.')     # RFC2152 example
+ws1.write(3,0, u'Hi Mom -\u263a-!')   # RFC2152 example
+ws1.write(4,0, u'\u65E5\u672C\u8A9E') # RFC2152 example
+ws1.write(5,0, u'Item 3 is \u00a31.') # RFC2152 example
+ws1.write(8,0, u'\N{INTEGRAL}')       # RFC2152 example
+
+w.add_sheet(u'A\u2262\u0391.')     # RFC2152 example
+w.add_sheet(u'Hi Mom -\u263a-!')   # RFC2152 example
+one_more_ws = w.add_sheet(u'\u65E5\u672C\u8A9E') # RFC2152 example
+w.add_sheet(u'Item 3 is \u00a31.') # RFC2152 example
+
+one_more_ws.write(0, 0, u'\u2665\u2665')
+
+w.add_sheet(u'\N{GREEK SMALL LETTER ETA WITH TONOS}')
+w.save('unicode1.xls')
+

config/softs/pyExcelerator-0.6.3a.patched/examples/unicode2.py

@@ -0,0 +1,21 @@
+#!/usr/bin/env python
+# -*- coding: windows-1251 -*-
+# Copyright (C) 2005 Kiseliov Roman
+__rev_id__ = """$Id: unicode2.py,v 1.1 2005/03/27 12:47:06 rvk Exp $"""
+
+
+from pyExcelerator import *
+
+w = Workbook()
+ws1 = w.add_sheet(u'\N{GREEK SMALL LETTER ALPHA}\N{GREEK SMALL LETTER BETA}\N{GREEK SMALL LETTER GAMMA}\u2665\u041e\u041b\u042f\u2665')
+
+fnt = Font()
+fnt.height = 26*20
+style = XFStyle()
+style.font = fnt
+
+for i in range(0x10000):
+    ws1.write(i/0x10, i%0x10, unichr(i), style)
+
+w.save('unicode2.xls')
+

config/softs/pyExcelerator-0.6.3a.patched/examples/wsprops.py

@@ -0,0 +1,157 @@
+__rev_id__ = """$Id: wsprops.py,v 1.3 2005/03/27 12:47:06 rvk Exp $"""
+
+props = \
+[
+        'name',
+        'parent',
+        'rows',
+        'cols',
+        'merged_ranges',
+        'bmp_rec',
+        'show_formulas',
+        'show_grid',
+        'show_headers',
+        'panes_frozen',
+        'show_empty_as_zero',
+        'auto_colour_grid',
+        'cols_right_to_left',
+        'show_outline',
+        'remove_splits',
+        'selected',
+        'hidden',
+        'page_preview',
+        'first_visible_row',
+        'first_visible_col',
+        'grid_colour',
+        'preview_magn',
+        'normal_magn',
+        'row_gut_width',
+        'col_gut_height',
+        'show_auto_page_breaks',
+        'dialogue_sheet',
+        'auto_style_outline',
+        'outline_below',
+        'outline_right',
+        'fit_num_pages',
+        'show_row_outline',
+        'show_col_outline',
+        'alt_expr_eval',
+        'alt_formula_entries',
+        'row_default_height',
+        'col_default_width',
+        'calc_mode',
+        'calc_count',
+        'RC_ref_mode',
+        'iterations_on',
+        'delta',
+        'save_recalc',
+        'print_headers',
+        'print_grid',
+        'grid_set',
+        'vert_page_breaks',
+        'horz_page_breaks',
+        'header_str',
+        'footer_str',
+        'print_centered_vert',
+        'print_centered_horz',
+        'left_margin',
+        'right_margin',
+        'top_margin',
+        'bottom_margin',
+        'paper_size_code',
+        'print_scaling',
+        'start_page_number',
+        'fit_width_to_pages',
+        'fit_height_to_pages',
+        'print_in_rows',
+        'portrait',
+        'print_not_colour',
+        'print_draft',
+        'print_notes',
+        'print_notes_at_end',
+        'print_omit_errors',
+        'print_hres',
+        'print_vres',
+        'header_margin',
+        'footer_margin',
+        'copies_num',
+]
+
+from pyExcelerator import *
+
+wb = Workbook()
+ws = wb.add_sheet('sheet')
+
+print ws.name
+print ws.parent
+print ws.rows
+print ws.cols
+print ws.merged_ranges
+print ws.bmp_rec
+print ws.show_formulas
+print ws.show_grid
+print ws.show_headers
+print ws.panes_frozen
+print ws.show_empty_as_zero
+print ws.auto_colour_grid
+print ws.cols_right_to_left
+print ws.show_outline
+print ws.remove_splits
+print ws.selected
+print ws.hidden
+print ws.page_preview
+print ws.first_visible_row
+print ws.first_visible_col
+print ws.grid_colour
+print ws.preview_magn
+print ws.normal_magn
+#print ws.row_gut_width
+#print ws.col_gut_height
+print ws.show_auto_page_breaks
+print ws.dialogue_sheet
+print ws.auto_style_outline
+print ws.outline_below
+print ws.outline_right
+print ws.fit_num_pages
+print ws.show_row_outline
+print ws.show_col_outline
+print ws.alt_expr_eval
+print ws.alt_formula_entries
+print ws.row_default_height
+print ws.col_default_width
+print ws.calc_mode
+print ws.calc_count
+print ws.RC_ref_mode
+print ws.iterations_on
+print ws.delta
+print ws.save_recalc
+print ws.print_headers
+print ws.print_grid
+#print ws.grid_set
+print ws.vert_page_breaks
+print ws.horz_page_breaks
+print ws.header_str
+print ws.footer_str
+print ws.print_centered_vert
+print ws.print_centered_horz
+print ws.left_margin
+print ws.right_margin
+print ws.top_margin
+print ws.bottom_margin
+print ws.paper_size_code
+print ws.print_scaling
+print ws.start_page_number
+print ws.fit_width_to_pages
+print ws.fit_height_to_pages
+print ws.print_in_rows
+print ws.portrait
+print ws.print_colour
+print ws.print_draft
+print ws.print_notes
+print ws.print_notes_at_end
+print ws.print_omit_errors
+print ws.print_hres
+print ws.print_vres
+print ws.header_margin
+print ws.footer_margin
+print ws.copies_num

config/softs/pyExcelerator-0.6.3a.patched/hrc/CVS/Entries

@@ -0,0 +1,3 @@
+/py-2.4-hrc.py/1.1/Tue Jul 19 18:58:44 2005//
+/python.hrc/1.2/Tue Jul 19 18:58:44 2005//
+D

config/softs/pyExcelerator-0.6.3a.patched/hrc/CVS/Entries.Extra

@@ -0,0 +1,2 @@
+/py-2.4-hrc.py////*///
+/python.hrc////*///

config/softs/pyExcelerator-0.6.3a.patched/hrc/CVS/Entries.Extra.Old

@@ -0,0 +1,2 @@
+/py-2.4-hrc.py////*///
+/python.hrc////*///

config/softs/pyExcelerator-0.6.3a.patched/hrc/CVS/Entries.Old

@@ -0,0 +1,3 @@
+/py-2.4-hrc.py/1.1/Thu Mar 24 15:30:01 2005//
+/python.hrc/1.2/Sun Mar 27 12:47:06 2005//
+D

config/softs/pyExcelerator-0.6.3a.patched/hrc/CVS/Repository

@@ -0,0 +1 @@
+pyExcelerator/hrc

config/softs/pyExcelerator-0.6.3a.patched/hrc/CVS/Root

@@ -0,0 +1 @@
+:ext:rvk@cvs.sf.net:/cvsroot/pyexcelerator

config/softs/pyExcelerator-0.6.3a.patched/hrc/py-2.4-hrc.py

@@ -0,0 +1,312 @@
+specials = [
+    "Ellipsis", 
+    "False", 
+    "None", 
+    "NotImplemented", 
+    "True", 
+    "__abs__", 
+    "__add__", 
+    "__and__", 
+    "__base__", 
+    "__bases__", 
+    "__basicsize__", 
+    "__builtins__", 
+    "__call__", 
+    "__class__", 
+    "__cmp__", 
+    "__coerce__", 
+    "__contains__", 
+    "__debug__", 
+    "__del__", 
+    "__delattr__", 
+    "__delete__", 
+    "__delitem__", 
+    "__delslice__", 
+    "__dict__", 
+    "__dictoffset__", 
+    "__div__", 
+    "__divmod__", 
+    "__doc__", 
+    "__eq__", 
+    "__flags__", 
+    "__float__", 
+    "__floordiv__", 
+    "__ge__", 
+    "__get__", 
+    "__getattr__", 
+    "__getattribute__", 
+    "__getitem__", 
+    "__getnewargs__", 
+    "__getslice__", 
+    "__gt__", 
+    "__hash__", 
+    "__hex__", 
+    "__iadd__", 
+    "__iand__", 
+    "__idiv__", 
+    "__ifloordiv__", 
+    "__ilshift__", 
+    "__imod__", 
+    "__import__", 
+    "__imul__", 
+    "__init__", 
+    "__int__", 
+    "__invert__", 
+    "__ior__", 
+    "__ipow__", 
+    "__irshift__", 
+    "__isub__", 
+    "__itemsize__", 
+    "__iter__", 
+    "__itruediv__", 
+    "__ixor__", 
+    "__le__", 
+    "__len__", 
+    "__long__", 
+    "__lshift__", 
+    "__lt__", 
+    "__main__", 
+    "__mod__", 
+    "__module__", 
+    "__mro__", 
+    "__mul__", 
+    "__name__", 
+    "__ne__", 
+    "__neg__", 
+    "__new__", 
+    "__nonzero__", 
+    "__oct__", 
+    "__or__", 
+    "__pos__", 
+    "__pow__", 
+    "__radd__", 
+    "__rand__", 
+    "__rdiv__", 
+    "__rdivmod__", 
+    "__reduce__", 
+    "__reduce_ex__", 
+    "__repr__", 
+    "__rfloordiv__", 
+    "__rlshift__", 
+    "__rmod__", 
+    "__rmul__", 
+    "__ror__", 
+    "__rpow__", 
+    "__rrshift__", 
+    "__rshift__", 
+    "__rsub__", 
+    "__rtruediv__", 
+    "__rxor__", 
+    "__set__", 
+    "__setattr__", 
+    "__setitem__", 
+    "__setslice__", 
+    "__str__", 
+    "__sub__", 
+    "__truediv__", 
+    "__weakrefoffset__", 
+    "__xor__", 
+    "abs", 
+    "apply", 
+    "basestring", 
+    "bool", 
+    "buffer", 
+    "callable", 
+    "capitalize", 
+    "center", 
+    "chr", 
+    "classmethod", 
+    "cmp", 
+    "coerce", 
+    "compile", 
+    "complex", 
+    "count", 
+    "decode", 
+    "delattr", 
+    "dict", 
+    "dir", 
+    "divmod", 
+    "encode", 
+    "endswith", 
+    "enumerate", 
+    "eval", 
+    "execfile", 
+    "exit", 
+    "expandtabs", 
+    "file", 
+    "filter", 
+    "find", 
+    "float", 
+    "frozenset", 
+    "getattr", 
+    "globals", 
+    "hasattr", 
+    "hash", 
+    "hex", 
+    "id", 
+    "index", 
+    "input", 
+    "int", 
+    "intern", 
+    "isalnum", 
+    "isalpha", 
+    "isdigit", 
+    "isinstance", 
+    "islower", 
+    "isspace", 
+    "issubclass", 
+    "istitle", 
+    "isupper", 
+    "iter", 
+    "join", 
+    "len", 
+    "list", 
+    "ljust", 
+    "locals", 
+    "long", 
+    "lower", 
+    "lstrip", 
+    "map", 
+    "max", 
+    "min", 
+    "next", 
+    "object", 
+    "oct", 
+    "open", 
+    "ord", 
+    "pow", 
+    "property", 
+    "quit", 
+    "range", 
+    "raw_input", 
+    "reduce", 
+    "reload", 
+    "replace", 
+    "repr", 
+    "reversed", 
+    "rfind", 
+    "rindex", 
+    "rjust", 
+    "round", 
+    "rsplit", 
+    "rstrip", 
+    "set", 
+    "setattr", 
+    "slice", 
+    "sorted", 
+    "split", 
+    "splitlines", 
+    "startswith", 
+    "staticmethod", 
+    "str", 
+    "strip", 
+    "sum", 
+    "super", 
+    "swapcase", 
+    "title", 
+    "translate", 
+    "tuple", 
+    "type", 
+    "unichr", 
+    "unicode", 
+    "upper", 
+    "vars", 
+    "xrange", 
+    "zfill", 
+    "zip"
+]
+
+exceptions = [
+    "Exception",
+    "SystemExit",
+    "StopIteration",
+    "StandardError",
+    "KeyboardInterrupt",
+    "ImportError",
+    "EnvironmentError",
+    "IOError",
+    "OSError",
+    "WindowsError",
+    "EOFError",
+    "RuntimeError",
+    "NotImplementedError",
+    "NameError",
+    "UnboundLocalError",
+    "AttributeError",
+    "SyntaxError",
+    "IndentationError",
+    "TabError",
+    "TypeError",
+    "AssertionError",
+    "LookupError",
+    "IndexError",
+    "KeyError",
+    "ArithmeticError",
+    "OverflowError",
+    "ZeroDivisionError",
+    "FloatingPointError",
+    "ValueError",
+    "UnicodeError",
+    "UnicodeEncodeError",
+    "UnicodeDecodeError",
+    "UnicodeTranslateError",
+    "ReferenceError",
+    "SystemError",
+    "MemoryError",
+    "Warning",
+    "UserWarning",
+    "DeprecationWarning",
+    "PendingDeprecationWarning",
+    "SyntaxWarning",
+    "OverflowWarning", # not generated in 2.4; won't exist in 2.5
+    "RuntimeWarning",
+    "FutureWarning"
+]
+
+reserved_words = [
+    "and",
+    "del",       
+    "for",       
+    "is",       
+    "raise",
+    "assert",    
+    "elif",
+    "from" ,     
+    "lambda",    
+    "return",   
+    "break",     
+    "else",      
+    "global",    
+    "not",
+    "try",     
+    "class",     
+    "except",    
+    "if",   
+    "or",        
+    "while",    
+    "continue",  
+    "exec",      
+    "import",    
+    "pass" ,     
+    "yield" ,   
+    "def",       
+    "finally",   
+    "in",        
+    "print"
+]
+
+print '<keywords region="pyWord">'
+for word in sorted(reserved_words):
+    print '    <word name="%s"/>' % word
+print '</keywords>'
+
+print '<keywords region="pyException">'
+for exc in sorted(exceptions):
+    print '    <word name="%s"/>' % exc
+print '</keywords>'
+
+print '<keywords region="pyBuiltins">'
+for special in sorted(specials):
+    print '    <word name="%s"/>' % special
+print '</keywords>'
+

config/softs/pyExcelerator-0.6.3a.patched/hrc/python.hrc

@@ -0,0 +1,347 @@
+<?xml version="1.0" encoding="Windows-1251"?>
+<!DOCTYPE hrc SYSTEM "../hrc.dtd">
+<?xml-stylesheet type="text/xsl" href="../hrc.xsl"?>
+<!--
+    Python Defs
+With help of:
+    Grzegorz Makarewicz <mak@mikroplan.com.pl>
+-->
+
+<!--
+    Updated by Roman V. Kiseliov <roman@kiseliov.ru>
+    for Python 2.4
+-->
+<hrc>
+
+<define name="pyString"   value="dString"/>
+<define name="pyComment"  value="dComment"/>
+<define name="pySymb"     value="dSymbol"/>
+<define name="pyWord"     value="dKeyword"/>
+<define name="pyBuiltins" value="dLabel"/>
+<define name="pyOctNumb"  value="dNumOct"/>
+
+<define name="pyException" value="dLabel"/>
+
+<scheme name="python">
+   <regexp match="/(\#.*$)/" region0="pyComment"/>
+   <block start='/\"\"\"/' end='/\"\"\"/' scheme="Comment"
+          region="pyComment" region00="dpOpenStruct" region10="dpCloseStruct"/>
+   <block start="/'''/" end="/'''/" scheme="Comment"
+          region="pyComment" region00="dpOpenStruct" region10="dpCloseStruct"/>
+   <!-- Strings -->
+   <regexp match='/("((\\.)|[^\\"])*?")/' region0="pyString"/>
+   <regexp match="/('((\\.)|[^\\'])*?')/" region0="pyString"/>
+
+   <!-- Numbers -->
+   <inherit scheme="mFloatNumb"/>
+   <inherit scheme="mcHexNumb"/>
+   <inherit scheme="mDecNumb"/>
+   <regexp match="/\b(0[0-7]*[Ll]?)\B/" region0="pyOctNumb"/>
+   <regexp match="/(`.*`)/" region0="pyBuiltins"/>
+
+   <keywords region="pySymb">
+      <symb name=";"/><symb name="="/><symb name="+"/><symb name="-"/>
+      <symb name="/"/><symb name="*"/><symb name="&amp;"/><symb name="|"/>
+      <symb name="^"/><symb name="("/><symb name=")"/><symb name="["/>
+      <symb name="]"/><symb name=","/><symb name="."/><symb name=":"/>
+      <symb name="!"/><symb name="~"/><symb name="&lt;"/><symb name="&gt;"/>
+      <symb name="%"/><symb name="{"/><symb name="}"/><symb name="?"/>
+      <symb name="@"/>
+   </keywords>
+   <keywords region="pyWord">
+       <word name="and"/>
+       <word name="assert"/>
+       <word name="break"/>
+       <word name="class"/>
+       <word name="continue"/>
+       <word name="def"/>
+       <word name="del"/>
+       <word name="elif"/>
+       <word name="else"/>
+       <word name="except"/>
+       <word name="exec"/>
+       <word name="finally"/>
+       <word name="for"/>
+       <word name="from"/>
+       <word name="global"/>
+       <word name="if"/>
+       <word name="import"/>
+       <word name="in"/>
+       <word name="is"/>
+       <word name="lambda"/>
+       <word name="not"/>
+       <word name="or"/>
+       <word name="pass"/>
+       <word name="print"/>
+       <word name="raise"/>
+       <word name="return"/>
+       <word name="try"/>
+       <word name="while"/>
+       <word name="yield"/>
+   </keywords>
+   <keywords region="pyException">
+       <word name="ArithmeticError"/>
+       <word name="AssertionError"/>
+       <word name="AttributeError"/>
+       <word name="DeprecationWarning"/>
+       <word name="EOFError"/>
+       <word name="EnvironmentError"/>
+       <word name="Exception"/>
+       <word name="FloatingPointError"/>
+       <word name="FutureWarning"/>
+       <word name="IOError"/>
+       <word name="ImportError"/>
+       <word name="IndentationError"/>
+       <word name="IndexError"/>
+       <word name="KeyError"/>
+       <word name="KeyboardInterrupt"/>
+       <word name="LookupError"/>
+       <word name="MemoryError"/>
+       <word name="NameError"/>
+       <word name="NotImplementedError"/>
+       <word name="OSError"/>
+       <word name="OverflowError"/>
+       <word name="OverflowWarning"/>
+       <word name="PendingDeprecationWarning"/>
+       <word name="ReferenceError"/>
+       <word name="RuntimeError"/>
+       <word name="RuntimeWarning"/>
+       <word name="StandardError"/>
+       <word name="StopIteration"/>
+       <word name="SyntaxError"/>
+       <word name="SyntaxWarning"/>
+       <word name="SystemError"/>
+       <word name="SystemExit"/>
+       <word name="TabError"/>
+       <word name="TypeError"/>
+       <word name="UnboundLocalError"/>
+       <word name="UnicodeDecodeError"/>
+       <word name="UnicodeEncodeError"/>
+       <word name="UnicodeError"/>
+       <word name="UnicodeTranslateError"/>
+       <word name="UserWarning"/>
+       <word name="ValueError"/>
+       <word name="Warning"/>
+       <word name="WindowsError"/>
+       <word name="ZeroDivisionError"/>
+   </keywords>
+   <keywords region="pyBuiltins">
+       <word name="Ellipsis"/>
+       <word name="False"/>
+       <word name="None"/>
+       <word name="NotImplemented"/>
+       <word name="True"/>
+       <word name="__abs__"/>
+       <word name="__add__"/>
+       <word name="__and__"/>
+       <word name="__base__"/>
+       <word name="__bases__"/>
+       <word name="__basicsize__"/>
+       <word name="__builtins__"/>
+       <word name="__call__"/>
+       <word name="__class__"/>
+       <word name="__cmp__"/>
+       <word name="__coerce__"/>
+       <word name="__contains__"/>
+       <word name="__debug__"/>
+       <word name="__del__"/>
+       <word name="__delattr__"/>
+       <word name="__delete__"/>
+       <word name="__delitem__"/>
+       <word name="__delslice__"/>
+       <word name="__dict__"/>
+       <word name="__dictoffset__"/>
+       <word name="__div__"/>
+       <word name="__divmod__"/>
+       <word name="__doc__"/>
+       <word name="__eq__"/>
+       <word name="__flags__"/>
+       <word name="__float__"/>
+       <word name="__floordiv__"/>
+       <word name="__ge__"/>
+       <word name="__get__"/>
+       <word name="__getattr__"/>
+       <word name="__getattribute__"/>
+       <word name="__getitem__"/>
+       <word name="__getnewargs__"/>
+       <word name="__getslice__"/>
+       <word name="__gt__"/>
+       <word name="__hash__"/>
+       <word name="__hex__"/>
+       <word name="__iadd__"/>
+       <word name="__iand__"/>
+       <word name="__idiv__"/>
+       <word name="__ifloordiv__"/>
+       <word name="__ilshift__"/>
+       <word name="__imod__"/>
+       <word name="__import__"/>
+       <word name="__imul__"/>
+       <word name="__init__"/>
+       <word name="__int__"/>
+       <word name="__invert__"/>
+       <word name="__ior__"/>
+       <word name="__ipow__"/>
+       <word name="__irshift__"/>
+       <word name="__isub__"/>
+       <word name="__itemsize__"/>
+       <word name="__iter__"/>
+       <word name="__itruediv__"/>
+       <word name="__ixor__"/>
+       <word name="__le__"/>
+       <word name="__len__"/>
+       <word name="__long__"/>
+       <word name="__lshift__"/>
+       <word name="__lt__"/>
+       <word name="__main__"/>
+       <word name="__mod__"/>
+       <word name="__module__"/>
+       <word name="__mro__"/>
+       <word name="__mul__"/>
+       <word name="__name__"/>
+       <word name="__ne__"/>
+       <word name="__neg__"/>
+       <word name="__new__"/>
+       <word name="__nonzero__"/>
+       <word name="__oct__"/>
+       <word name="__or__"/>
+       <word name="__pos__"/>
+       <word name="__pow__"/>
+       <word name="__radd__"/>
+       <word name="__rand__"/>
+       <word name="__rdiv__"/>
+       <word name="__rdivmod__"/>
+       <word name="__reduce__"/>
+       <word name="__reduce_ex__"/>
+       <word name="__repr__"/>
+       <word name="__rfloordiv__"/>
+       <word name="__rlshift__"/>
+       <word name="__rmod__"/>
+       <word name="__rmul__"/>
+       <word name="__ror__"/>
+       <word name="__rpow__"/>
+       <word name="__rrshift__"/>
+       <word name="__rshift__"/>
+       <word name="__rsub__"/>
+       <word name="__rtruediv__"/>
+       <word name="__rxor__"/>
+       <word name="__set__"/>
+       <word name="__setattr__"/>
+       <word name="__setitem__"/>
+       <word name="__setslice__"/>
+       <word name="__str__"/>
+       <word name="__sub__"/>
+       <word name="__truediv__"/>
+       <word name="__weakrefoffset__"/>
+       <word name="__xor__"/>
+       <word name="abs"/>
+       <word name="apply"/>
+       <word name="basestring"/>
+       <word name="bool"/>
+       <word name="buffer"/>
+       <word name="callable"/>
+       <word name="capitalize"/>
+       <word name="center"/>
+       <word name="chr"/>
+       <word name="classmethod"/>
+       <word name="cmp"/>
+       <word name="coerce"/>
+       <word name="compile"/>
+       <word name="complex"/>
+       <word name="count"/>
+       <word name="decode"/>
+       <word name="delattr"/>
+       <word name="dict"/>
+       <word name="dir"/>
+       <word name="divmod"/>
+       <word name="encode"/>
+       <word name="endswith"/>
+       <word name="enumerate"/>
+       <word name="eval"/>
+       <word name="execfile"/>
+       <word name="exit"/>
+       <word name="expandtabs"/>
+       <word name="file"/>
+       <word name="filter"/>
+       <word name="find"/>
+       <word name="float"/>
+       <word name="frozenset"/>
+       <word name="getattr"/>
+       <word name="globals"/>
+       <word name="hasattr"/>
+       <word name="hash"/>
+       <word name="hex"/>
+       <word name="id"/>
+       <word name="index"/>
+       <word name="input"/>
+       <word name="int"/>
+       <word name="intern"/>
+       <word name="isalnum"/>
+       <word name="isalpha"/>
+       <word name="isdigit"/>
+       <word name="isinstance"/>
+       <word name="islower"/>
+       <word name="isspace"/>
+       <word name="issubclass"/>
+       <word name="istitle"/>
+       <word name="isupper"/>
+       <word name="iter"/>
+       <word name="join"/>
+       <word name="len"/>
+       <word name="list"/>
+       <word name="ljust"/>
+       <word name="locals"/>
+       <word name="long"/>
+       <word name="lower"/>
+       <word name="lstrip"/>
+       <word name="map"/>
+       <word name="max"/>
+       <word name="min"/>
+       <word name="next"/>
+       <word name="object"/>
+       <word name="oct"/>
+       <word name="open"/>
+       <word name="ord"/>
+       <word name="pow"/>
+       <word name="property"/>
+       <word name="quit"/>
+       <word name="range"/>
+       <word name="raw_input"/>
+       <word name="reduce"/>
+       <word name="reload"/>
+       <word name="replace"/>
+       <word name="repr"/>
+       <word name="reversed"/>
+       <word name="rfind"/>
+       <word name="rindex"/>
+       <word name="rjust"/>
+       <word name="round"/>
+       <word name="rsplit"/>
+       <word name="rstrip"/>
+       <word name="set"/>
+       <word name="setattr"/>
+       <word name="slice"/>
+       <word name="sorted"/>
+       <word name="split"/>
+       <word name="splitlines"/>
+       <word name="startswith"/>
+       <word name="staticmethod"/>
+       <word name="str"/>
+       <word name="strip"/>
+       <word name="sum"/>
+       <word name="super"/>
+       <word name="swapcase"/>
+       <word name="title"/>
+       <word name="translate"/>
+       <word name="tuple"/>
+       <word name="type"/>
+       <word name="unichr"/>
+       <word name="unicode"/>
+       <word name="upper"/>
+       <word name="vars"/>
+       <word name="xrange"/>
+       <word name="zfill"/>
+       <word name="zip"/>
+   </keywords>
+</scheme>
+
+</hrc>

config/softs/pyExcelerator-0.6.3a.patched/museum/CVS/Entries

@@ -0,0 +1,9 @@
+/frmla.xls/1.1/Tue Aug  2 18:56:30 2005/-kb/
+/chart1v8.xls/1.1/Tue Jul 19 18:58:44 2005/-kb/
+/excel2003.xls/1.1/Tue Jul 19 18:58:44 2005/-kb/
+/macro2v8.xls/1.1/Tue Jul 19 18:58:44 2005/-kb/
+/mini-mini.xls/1.1/Tue Jul 19 18:58:44 2005/-kb/
+/mini.xls/1.1/Tue Jul 19 18:58:44 2005/-kb/
+/oo14.xls/1.1/Tue Jul 19 18:58:44 2005/-kb/
+/P-0508-0000507647-3280-5298.xls/1.1/Thu Sep 29 08:49:20 2005/-kb/
+D

config/softs/pyExcelerator-0.6.3a.patched/museum/CVS/Entries.Extra

@@ -0,0 +1,8 @@
+/frmla.xls////*///
+/chart1v8.xls////*///
+/excel2003.xls////*///
+/macro2v8.xls////*///
+/mini-mini.xls////*///
+/mini.xls////*///
+/oo14.xls////*///
+/P-0508-0000507647-3280-5298.xls////*///

config/softs/pyExcelerator-0.6.3a.patched/museum/CVS/Entries.Extra.Old

@@ -0,0 +1,8 @@
+/frmla.xls////*///
+/chart1v8.xls////*///
+/excel2003.xls////*///
+/macro2v8.xls////*///
+/mini-mini.xls////*///
+/mini.xls////*///
+/oo14.xls////*///
+/P-0508-0000507647-3280-5298.xls////*///

config/softs/pyExcelerator-0.6.3a.patched/museum/CVS/Entries.Old

@@ -0,0 +1,9 @@
+/frmla.xls/1.1/Tue Aug  2 18:56:30 2005/-kb/
+/chart1v8.xls/1.1/Tue Jul 19 18:58:44 2005/-kb/
+/excel2003.xls/1.1/Tue Jul 19 18:58:44 2005/-kb/
+/macro2v8.xls/1.1/Tue Jul 19 18:58:44 2005/-kb/
+/mini-mini.xls/1.1/Tue Jul 19 18:58:44 2005/-kb/
+/mini.xls/1.1/Tue Jul 19 18:58:44 2005/-kb/
+/oo14.xls/1.1/Tue Jul 19 18:58:44 2005/-kb/
+/P-0508-0000507647-3280-5298.xls/0/dummy timestamp/-kb/
+D

config/softs/pyExcelerator-0.6.3a.patched/museum/CVS/Repository

@@ -0,0 +1 @@
+pyExcelerator/museum

config/softs/pyExcelerator-0.6.3a.patched/museum/CVS/Root

@@ -0,0 +1 @@
+:ext:rvk@cvs.sf.net:/cvsroot/pyexcelerator

config/softs/pyExcelerator-0.6.3a.patched/pyExcelerator/Bitmap.py

@@ -0,0 +1,305 @@
+#!/usr/bin/env python
+# -*- coding: windows-1251 -*-
+
+#  Copyright (C) 2005 Roman V. Kiseliov
+
+#  Portions are Copyright (c) 2004 Evgeny Filatov <fufff@users.sourceforge.net>
+
+#  Portions are Copyright (c) 2002-2004 John McNamara (Perl Spreadsheet::WriteExcel)
+
+#  All rights reserved.
+
+# 
+#  Redistribution and use in source and binary forms, with or without
+#  modification, are permitted provided that the following conditions
+#  are met:
+# 
+#  1. Redistributions of source code must retain the above copyright
+#     notice, this list of conditions and the following disclaimer.
+# 
+#  2. Redistributions in binary form must reproduce the above copyright
+#     notice, this list of conditions and the following disclaimer in
+#     the documentation and/or other materials provided with the
+#     distribution.
+# 
+#  3. All advertising materials mentioning features or use of this
+#     software must display the following acknowledgment:
+#     "This product includes software developed by
+#      Roman V. Kiseliov <roman@kiseliov.ru>."
+# 
+#  4. Redistributions of any form whatsoever must retain the following
+#     acknowledgment:
+#     "This product includes software developed by
+#      Roman V. Kiseliov <roman@kiseliov.ru>."
+# 
+#  THIS SOFTWARE IS PROVIDED BY Roman V. Kiseliov ``AS IS'' AND ANY
+#  EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+#  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+#  PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL Roman V. Kiseliov OR
+#  ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+#  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+#  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+#  HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+#  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+#  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+#  OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+__rev_id__ = """$Id: Bitmap.py,v 1.4 2005/07/20 07:24:11 rvk Exp $"""
+
+
+from BIFFRecords import BiffRecord
+from struct import *
+
+
+def _size_col(sheet, col):
+    return sheet.col_width(col)
+
+
+def _size_row(sheet, row):
+    return sheet.row_height(row)     
+
+
+def _position_image(sheet, row_start, col_start, x1, y1, width, height):
+    """Calculate the vertices that define the position of the image as required by
+    the OBJ record.
+
+             +------------+------------+
+             |     A      |      B     |
+       +-----+------------+------------+
+       |     |(x1,y1)     |            |
+       |  1  |(A1)._______|______      |
+       |     |    |              |     |
+       |     |    |              |     |
+       +-----+----|    BITMAP    |-----+
+       |     |    |              |     |
+       |  2  |    |______________.     |
+       |     |            |        (B2)|
+       |     |            |     (x2,y2)|
+       +---- +------------+------------+
+
+    Example of a bitmap that covers some of the area from cell A1 to cell B2.
+
+    Based on the width and height of the bitmap we need to calculate 8 vars:
+        col_start, row_start, col_end, row_end, x1, y1, x2, y2.
+    The width and height of the cells are also variable and have to be taken into
+    account.
+    The values of col_start and row_start are passed in from the calling
+    function. The values of col_end and row_end are calculated by subtracting
+    the width and height of the bitmap from the width and height of the
+    underlying cells.
+    The vertices are expressed as a percentage of the underlying cell width as
+    follows (rhs values are in pixels):
+
+           x1 = X / W *1024
+           y1 = Y / H *256
+           x2 = (X-1) / W *1024
+           y2 = (Y-1) / H *256
+
+           Where:  X is distance from the left side of the underlying cell
+                   Y is distance from the top of the underlying cell
+                   W is the width of the cell
+                   H is the height of the cell
+
+    Note: the SDK incorrectly states that the height should be expressed as a
+    percentage of 1024.
+
+    col_start  - Col containing upper left corner of object
+    row_start  - Row containing top left corner of object
+    x1  - Distance to left side of object
+    y1  - Distance to top of object
+    width  - Width of image frame
+    height  - Height of image frame
+    
+    """
+    # Adjust start column for offsets that are greater than the col width
+    while x1 >= _size_col(sheet, col_start):
+        x1 -= _size_col(sheet, col_start)
+        col_start += 1
+    # Adjust start row for offsets that are greater than the row height
+    while y1 >= _size_row(sheet, row_start):
+        y1 -= _size_row(sheet, row_start)
+        row_start += 1
+    # Initialise end cell to the same as the start cell
+    row_end = row_start   # Row containing bottom right corner of object
+    col_end = col_start   # Col containing lower right corner of object
+    width = width + x1 - 1
+    height = height + y1 - 1
+    # Subtract the underlying cell widths to find the end cell of the image
+    while (width >= _size_col(sheet, col_end)):
+        width -= _size_col(sheet, col_end)
+        col_end += 1
+    # Subtract the underlying cell heights to find the end cell of the image
+    while (height >= _size_row(sheet, row_end)):
+        height -= _size_row(sheet, row_end)
+        row_end += 1
+    # Bitmap isn't allowed to start or finish in a hidden cell, i.e. a cell
+    # with zero height or width.
+    if ((_size_col(sheet, col_start) == 0) or (_size_col(sheet, col_end) == 0)
+            or (_size_row(sheet, row_start) == 0) or (_size_row(sheet, row_end) == 0)):
+        return
+    # Convert the pixel values to the percentage value expected by Excel
+    x1 = float(x1) / _size_col(sheet, col_start) * 1024
+    y1 = float(y1) / _size_row(sheet, row_start) * 256
+    # Distance to right side of object
+    x2 = float(width) / _size_col(sheet, col_end) * 1024
+    # Distance to bottom of object
+    y2 = float(height) / _size_row(sheet, row_end) * 256
+    return (col_start, x1, row_start, y1, col_end, x2, row_end, y2)
+
+
+class ObjBmpRecord(BiffRecord):
+    _REC_ID = 0x005D    # Record identifier
+
+    def __init__(self, row, col, sheet, im_data_bmp, x, y, scale_x, scale_y):
+        # Scale the frame of the image.
+        width = im_data_bmp.width * scale_x
+        height = im_data_bmp.height * scale_y
+
+        # Calculate the vertices of the image and write the OBJ record
+        col_start, x1, row_start, y1, col_end, x2, row_end, y2 = _position_image(sheet, row, col, x, y, width, height)
+
+        """Store the OBJ record that precedes an IMDATA record. This could be generalise
+        to support other Excel objects.
+
+        """
+        cObj = 0x0001      # Count of objects in file (set to 1)
+        OT = 0x0008        # Object type. 8 = Picture
+        id = 0x0001        # Object ID
+        grbit = 0x0614     # Option flags
+        colL = col_start    # Col containing upper left corner of object
+        dxL = x1            # Distance from left side of cell
+        rwT = row_start     # Row containing top left corner of object
+        dyT = y1            # Distance from top of cell
+        colR = col_end      # Col containing lower right corner of object
+        dxR = x2            # Distance from right of cell
+        rwB = row_end       # Row containing bottom right corner of object
+        dyB = y2            # Distance from bottom of cell
+        cbMacro = 0x0000    # Length of FMLA structure
+        Reserved1 = 0x0000  # Reserved
+        Reserved2 = 0x0000  # Reserved
+        icvBack = 0x09      # Background colour
+        icvFore = 0x09      # Foreground colour
+        fls = 0x00          # Fill pattern
+        fAuto = 0x00        # Automatic fill
+        icv = 0x08          # Line colour
+        lns = 0xff          # Line style
+        lnw = 0x01          # Line weight
+        fAutoB = 0x00       # Automatic border
+        frs = 0x0000        # Frame style
+        cf = 0x0009         # Image format, 9 = bitmap
+        Reserved3 = 0x0000  # Reserved
+        cbPictFmla = 0x0000 # Length of FMLA structure
+        Reserved4 = 0x0000  # Reserved
+        grbit2 = 0x0001     # Option flags
+        Reserved5 = 0x0000  # Reserved
+        
+        data = pack("<L", cObj)
+        data += pack("<H", OT)
+        data += pack("<H", id)
+        data += pack("<H", grbit)
+        data += pack("<H", colL)
+        data += pack("<H", dxL)
+        data += pack("<H", rwT)
+        data += pack("<H", dyT)
+        data += pack("<H", colR)
+        data += pack("<H", dxR)
+        data += pack("<H", rwB)
+        data += pack("<H", dyB)
+        data += pack("<H", cbMacro)
+        data += pack("<L", Reserved1)
+        data += pack("<H", Reserved2)
+        data += pack("<B", icvBack)
+        data += pack("<B", icvFore)
+        data += pack("<B", fls)
+        data += pack("<B", fAuto)
+        data += pack("<B", icv)
+        data += pack("<B", lns)
+        data += pack("<B", lnw)
+        data += pack("<B", fAutoB)
+        data += pack("<H", frs)
+        data += pack("<L", cf)
+        data += pack("<H", Reserved3)
+        data += pack("<H", cbPictFmla)
+        data += pack("<H", Reserved4)
+        data += pack("<H", grbit2)
+        data += pack("<L", Reserved5)
+
+        self._rec_data = data
+
+def _process_bitmap(bitmap):
+    """Convert a 24 bit bitmap into the modified internal format used by Windows.
+    This is described in BITMAPCOREHEADER and BITMAPCOREINFO structures in the
+    MSDN library.
+
+    """
+    # Open file and binmode the data in case the platform needs it.
+    fh = file(bitmap, "rb")
+    try:
+        # Slurp the file into a string.
+        data = fh.read()
+    finally:
+        fh.close()
+    # Check that the file is big enough to be a bitmap.
+    if len(data) <= 0x36:
+        raise Exception("bitmap doesn't contain enough data.")
+    # The first 2 bytes are used to identify the bitmap.
+    if (data[:2] != "BM"):
+        raise Exception("bitmap doesn't appear to to be a valid bitmap image.")
+    # Remove bitmap data: ID.
+    data = data[2:]
+    # Read and remove the bitmap size. This is more reliable than reading
+    # the data size at offset 0x22.
+    #
+    size = unpack("<L", data[:4])[0]
+    size -=  0x36   # Subtract size of bitmap header.
+    size +=  0x0C   # Add size of BIFF header.
+    data = data[4:]
+    # Remove bitmap data: reserved, offset, header length.
+    data = data[12:]
+    # Read and remove the bitmap width and height. Verify the sizes.
+    width, height = unpack("<LL", data[:8])
+    data = data[8:]
+    if (width > 0xFFFF):
+        raise Exception("bitmap: largest image width supported is 65k.")
+    if (height > 0xFFFF):
+        raise Exception("bitmap: largest image height supported is 65k.")
+    # Read and remove the bitmap planes and bpp data. Verify them.
+    planes, bitcount = unpack("<HH", data[:4])
+    data = data[4:]
+    if (bitcount != 24):
+        raise Exception("bitmap isn't a 24bit true color bitmap.")
+    if (planes != 1):
+        raise Exception("bitmap: only 1 plane supported in bitmap image.")
+    # Read and remove the bitmap compression. Verify compression.
+    compression = unpack("<L", data[:4])[0]
+    data = data[4:]
+    if (compression != 0):
+        raise Exception("bitmap: compression not supported in bitmap image.")
+    # Remove bitmap data: data size, hres, vres, colours, imp. colours.
+    data = data[20:]
+    # Add the BITMAPCOREHEADER data
+    header = pack("<LHHHH", 0x000c, width, height, 0x01, 0x18)
+    data = header + data
+    return (width, height, size, data)
+
+
+class ImDataBmpRecord(BiffRecord):
+    _REC_ID = 0x007F
+
+    def __init__(self, filename):
+        """Insert a 24bit bitmap image in a worksheet. The main record required is
+        IMDATA but it must be proceeded by a OBJ record to define its position.
+
+        """
+        BiffRecord.__init__(self)
+
+        self.width, self.height, self.size, data = _process_bitmap(filename)
+        # Write the IMDATA record to store the bitmap data
+        cf = 0x09
+        env = 0x01
+        lcb = self.size
+        self._rec_data = pack("<HHL", cf, env, lcb) + data
+
+

config/softs/pyExcelerator-0.6.3a.patched/pyExcelerator/CVS/Entries

@@ -0,0 +1,22 @@
+/Cell.py/1.3/Thu Aug 11 08:53:48 2005//
+/Row.py/1.6/Thu Aug 11 08:53:48 2005//
+/__init__.py/1.6/Thu Aug 11 08:53:48 2005//
+/Utils.py/1.1/Thu Aug 11 08:53:48 2005//
+/Bitmap.py/1.4/Wed Jul 20 07:24:10 2005//
+/Column.py/1.4/Wed Jul 20 07:24:10 2005//
+/Deco.py/1.4/Wed Jul 20 07:24:10 2005//
+/ExcelFormulaLexer.py/1.4/Sun Aug 14 06:40:22 2005//
+/ExcelFormulaParser.py/1.4/Sun Aug 14 06:40:22 2005//
+/Formatting.py/1.4/Wed Jul 20 07:24:10 2005//
+/Style.py/1.4/Wed Jul 20 07:24:10 2005//
+/UnicodeUtils.py/1.4/Wed Jul 20 07:24:10 2005//
+/excel-formula.g/1.4/Sun Aug 14 06:40:22 2005//
+/BIFFRecords.py/1.7/Wed Oct 26 07:44:24 2005//
+/CompoundDoc.py/1.7/Wed Oct 26 07:44:24 2005//
+/ExcelMagic.py/1.2/Wed Oct 26 07:44:24 2005//
+/ImportXLS.py/1.6/Wed Oct 26 07:44:24 2005//
+/Workbook.py/1.5/Wed Oct 26 07:44:24 2005//
+/Worksheet.py/1.8/Wed Oct 26 07:44:24 2005//
+/antlr.py/1.2/Wed Oct 26 07:44:24 2005//
+/ExcelFormula.py/1.3/Thu Oct  6 17:36:56 2005//
+D

config/softs/pyExcelerator-0.6.3a.patched/pyExcelerator/CVS/Entries.Extra

@@ -0,0 +1,21 @@
+/Cell.py////*///
+/Row.py////*///
+/__init__.py////*///
+/Utils.py////*///
+/Bitmap.py////*///
+/Column.py////*///
+/Deco.py////*///
+/ExcelFormulaLexer.py////*///
+/ExcelFormulaParser.py////*///
+/Formatting.py////*///
+/Style.py////*///
+/UnicodeUtils.py////*///
+/excel-formula.g////*///
+/BIFFRecords.py////*///
+/CompoundDoc.py////*///
+/ExcelMagic.py////*///
+/ImportXLS.py////*///
+/Workbook.py////*///
+/Worksheet.py////*///
+/antlr.py////*///
+/ExcelFormula.py////*///

config/softs/pyExcelerator-0.6.3a.patched/pyExcelerator/CVS/Entries.Extra.Old

@@ -0,0 +1,21 @@
+/Cell.py////*///
+/ExcelFormula.py////*///
+/Row.py////*///
+/__init__.py////*///
+/Utils.py////*///
+/Bitmap.py////*///
+/Column.py////*///
+/Deco.py////*///
+/ExcelFormulaLexer.py////*///
+/ExcelFormulaParser.py////*///
+/Formatting.py////*///
+/Style.py////*///
+/UnicodeUtils.py////*///
+/excel-formula.g////*///
+/BIFFRecords.py////*///
+/CompoundDoc.py////*///
+/ExcelMagic.py////*///
+/ImportXLS.py////*///
+/Workbook.py////*///
+/Worksheet.py////*///
+/antlr.py////*///

config/softs/pyExcelerator-0.6.3a.patched/pyExcelerator/CVS/Entries.Old

@@ -0,0 +1,22 @@
+/Cell.py/1.3/Thu Aug 11 08:53:48 2005//
+/ExcelFormula.py/1.3/Thu Aug 11 08:53:48 2005//
+/Row.py/1.6/Thu Aug 11 08:53:48 2005//
+/__init__.py/1.6/Thu Aug 11 08:53:48 2005//
+/Utils.py/1.1/Thu Aug 11 08:53:48 2005//
+/Bitmap.py/1.4/Wed Jul 20 07:24:10 2005//
+/Column.py/1.4/Wed Jul 20 07:24:10 2005//
+/Deco.py/1.4/Wed Jul 20 07:24:10 2005//
+/ExcelFormulaLexer.py/1.4/Sun Aug 14 06:40:22 2005//
+/ExcelFormulaParser.py/1.4/Sun Aug 14 06:40:22 2005//
+/Formatting.py/1.4/Wed Jul 20 07:24:10 2005//
+/Style.py/1.4/Wed Jul 20 07:24:10 2005//
+/UnicodeUtils.py/1.4/Wed Jul 20 07:24:10 2005//
+/excel-formula.g/1.4/Sun Aug 14 06:40:22 2005//
+/BIFFRecords.py/1.7/Wed Oct 26 07:44:24 2005//
+/CompoundDoc.py/1.7/Wed Oct 26 07:44:24 2005//
+/ExcelMagic.py/1.2/Wed Oct 26 07:44:24 2005//
+/ImportXLS.py/1.6/Wed Oct 26 07:44:24 2005//
+/Workbook.py/1.5/Wed Oct 26 07:44:24 2005//
+/Worksheet.py/1.8/Wed Oct 26 07:44:24 2005//
+/antlr.py/1.2/Wed Oct 26 07:44:24 2005//
+D

config/softs/pyExcelerator-0.6.3a.patched/pyExcelerator/CVS/Repository

@@ -0,0 +1 @@
+pyExcelerator/pyExcelerator

config/softs/pyExcelerator-0.6.3a.patched/pyExcelerator/CVS/Root

@@ -0,0 +1 @@
+:ext:rvk@cvs.sf.net:/cvsroot/pyexcelerator

config/softs/pyExcelerator-0.6.3a.patched/pyExcelerator/Cell.py

@@ -0,0 +1,169 @@
+#!/usr/bin/env python
+# -*- coding: windows-1251 -*-
+
+#  Copyright (C) 2005 Roman V. Kiseliov
+#  All rights reserved.
+# 
+#  Redistribution and use in source and binary forms, with or without
+#  modification, are permitted provided that the following conditions
+#  are met:
+# 
+#  1. Redistributions of source code must retain the above copyright
+#     notice, this list of conditions and the following disclaimer.
+# 
+#  2. Redistributions in binary form must reproduce the above copyright
+#     notice, this list of conditions and the following disclaimer in
+#     the documentation and/or other materials provided with the
+#     distribution.
+# 
+#  3. All advertising materials mentioning features or use of this
+#     software must display the following acknowledgment:
+#     "This product includes software developed by
+#      Roman V. Kiseliov <roman@kiseliov.ru>."
+# 
+#  4. Redistributions of any form whatsoever must retain the following
+#     acknowledgment:
+#     "This product includes software developed by
+#      Roman V. Kiseliov <roman@kiseliov.ru>."
+# 
+#  THIS SOFTWARE IS PROVIDED BY Roman V. Kiseliov ``AS IS'' AND ANY
+#  EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+#  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+#  PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL Roman V. Kiseliov OR
+#  ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+#  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+#  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+#  HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+#  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+#  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+#  OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+__rev_id__ = """$Id: Cell.py,v 1.3 2005/08/11 08:53:48 rvk Exp $"""
+
+
+import struct
+import BIFFRecords
+
+
+class StrCell(object):
+    __slots__ = ["__init__", "get_biff_data",
+                "__parent", "__idx", "__xf_idx", "__sst_idx"]
+
+    def __init__(self, parent, idx, xf_idx, sst_idx):
+        self.__parent = parent
+        self.__idx = idx
+        self.__xf_idx = xf_idx
+        self.__sst_idx = sst_idx
+
+    def get_biff_data(self):
+        return BIFFRecords.LabelSSTRecord(self.__parent.get_index(), self.__idx, self.__xf_idx, self.__sst_idx).get()
+
+
+class BlankCell(object):
+    __slots__ = ["__init__", "get_biff_data",
+                "__parent", "__idx", "__xf_idx"]
+
+    def __init__(self, parent, idx, xf_idx):
+        self.__parent = parent
+        self.__idx = idx
+        self.__xf_idx = xf_idx
+
+    def get_biff_data(self):
+        return BIFFRecords.BlankRecord(self.__parent.get_index(), self.__idx, self.__xf_idx).get()
+
+
+class MulBlankCell(object):
+    __slots__ = ["__init__", "get_biff_data",
+                "__parent", "__col1", "__col2", "__xf_idx"]
+
+    def __init__(self, parent, col1, col2, xf_idx):
+        self.__parent = parent
+        self.__col1 = col1
+        self.__col2 = col2
+        self.__xf_idx = xf_idx
+
+    def get_biff_data(self):
+        return BIFFRecords.MulBlankRecord(self.__parent.get_index(), self.__col1, self.__col2, self.__xf_idx).get()
+
+
+class NumberCell(object):
+    __slots__ = ["__init__", "get_biff_data",
+                "__parent", "__idx", "__xf_idx", "__number"]
+
+
+    def __init__(self, parent, idx, xf_idx, number):
+        self.__parent = parent
+        self.__idx = idx
+        self.__xf_idx = xf_idx
+        self.__number = float(number)
+
+
+    def get_biff_data(self):
+        rk_encoded = 0
+
+        packed = struct.pack('<d', self.__number)
+
+        #print self.__number
+        w0, w1, w2, w3 = struct.unpack('<4H', packed)
+        if w0 == 0 and w1 == 0 and w2 & 0xFFFC == w2:
+            # 34 lsb are 0
+            #print "float RK"
+            rk_encoded = (w3 << 16) | w2
+            return BIFFRecords.RKRecord(self.__parent.get_index(), self.__idx, self.__xf_idx, rk_encoded).get()
+
+        if abs(self.__number) < 0x40000000 and int(self.__number) == self.__number:
+            #print "30-bit integer RK"
+            rk_encoded = 2 | (int(self.__number) << 2)
+            return BIFFRecords.RKRecord(self.__parent.get_index(), self.__idx, self.__xf_idx, rk_encoded).get()
+
+        temp = self.__number*100
+        packed100 = struct.pack('<d', temp)
+        w0, w1, w2, w3 = struct.unpack('<4H', packed100)
+        if w0 == 0 and w1 == 0 and w2 & 0xFFFC == w2:
+            # 34 lsb are 0
+            #print "float RK*100"
+            rk_encoded = 1 | (w3 << 16) | w2
+            return BIFFRecords.RKRecord(self.__parent.get_index(), self.__idx, self.__xf_idx, rk_encoded).get()
+
+        if abs(temp) < 0x40000000 and int(temp) == temp:
+            #print "30-bit integer RK*100"
+            rk_encoded = 3 | (int(temp) << 2)
+            return BIFFRecords.RKRecord(self.__parent.get_index(), self.__idx, self.__xf_idx, rk_encoded).get()
+
+        #print "Number" 
+        #print
+        return BIFFRecords.NumberRecord(self.__parent.get_index(), self.__idx, self.__xf_idx, self.__number).get()
+
+
+class MulNumberCell(object):
+    __slots__ = ["__init__", "get_biff_data"]
+
+    def __init__(self, parent, idx, xf_idx, sst_idx):
+        self.__parent = parent
+        self.__idx = idx
+        self.__xf_idx = xf_idx
+        self.__sst_idx = sst_idx
+
+
+    def get_biff_data(self):
+        raise Exception
+
+
+class FormulaCell(object):
+    __slots__ = ["__init__", "get_biff_data",
+                "__parent", "__idx", "__xf_idx", "__frmla"]
+
+    def __init__(self, parent, idx, xf_idx, frmla):
+        self.__parent = parent
+        self.__idx = idx
+        self.__xf_idx = xf_idx
+        self.__frmla = frmla
+
+
+    def get_biff_data(self):
+        return BIFFRecords.FormulaRecord(self.__parent.get_index(), self.__idx, self.__xf_idx, self.__frmla.rpn()).get()
+
+
+

config/softs/pyExcelerator-0.6.3a.patched/pyExcelerator/Column.py

@@ -0,0 +1,73 @@
+#!/usr/bin/env python
+# -*- coding: windows-1251 -*-
+
+#  Copyright (C) 2005 Roman V. Kiseliov
+#  All rights reserved.
+# 
+#  Redistribution and use in source and binary forms, with or without
+#  modification, are permitted provided that the following conditions
+#  are met:
+# 
+#  1. Redistributions of source code must retain the above copyright
+#     notice, this list of conditions and the following disclaimer.
+# 
+#  2. Redistributions in binary form must reproduce the above copyright
+#     notice, this list of conditions and the following disclaimer in
+#     the documentation and/or other materials provided with the
+#     distribution.
+# 
+#  3. All advertising materials mentioning features or use of this
+#     software must display the following acknowledgment:
+#     "This product includes software developed by
+#      Roman V. Kiseliov <roman@kiseliov.ru>."
+# 
+#  4. Redistributions of any form whatsoever must retain the following
+#     acknowledgment:
+#     "This product includes software developed by
+#      Roman V. Kiseliov <roman@kiseliov.ru>."
+# 
+#  THIS SOFTWARE IS PROVIDED BY Roman V. Kiseliov ``AS IS'' AND ANY
+#  EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+#  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+#  PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL Roman V. Kiseliov OR
+#  ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+#  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+#  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+#  HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+#  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+#  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+#  OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+__rev_id__ = """$Id: Column.py,v 1.4 2005/07/20 07:24:11 rvk Exp $"""
+
+
+from BIFFRecords import ColInfoRecord
+from Deco import *
+from Worksheet import Worksheet
+
+
+class Column(object):
+    #accepts(object, int, Worksheet)
+    def __init__(self, indx, parent_sheet):
+        self._index = indx
+        self._parent = parent_sheet
+        self._parent_wb = parent_sheet.get_parent()
+        self._xf_index = 0x0F
+        
+        self.width = 0x0B92
+        self.hidden = 0
+        self.level = 0
+        self.collapse = 0
+
+
+    def get_biff_record(self):
+        options =  (self.hidden & 0x01) << 0
+        options |= (self.level & 0x07) << 8
+        options |= (self.collapse & 0x01) << 12
+        
+        return ColInfoRecord(self._index, self._index, self.width, self._xf_index, options).get()
+        
+        
+        

config/softs/pyExcelerator-0.6.3a.patched/pyExcelerator/CompoundDoc.py

@@ -0,0 +1,577 @@
+#!/usr/bin/env python
+# -*- coding: windows-1251 -*-
+
+#  Copyright (C) 2005 Roman V. Kiseliov
+#  All rights reserved.
+# 
+#  Redistribution and use in source and binary forms, with or without
+#  modification, are permitted provided that the following conditions
+#  are met:
+# 
+#  1. Redistributions of source code must retain the above copyright
+#     notice, this list of conditions and the following disclaimer.
+# 
+#  2. Redistributions in binary form must reproduce the above copyright
+#     notice, this list of conditions and the following disclaimer in
+#     the documentation and/or other materials provided with the
+#     distribution.
+# 
+#  3. All advertising materials mentioning features or use of this
+#     software must display the following acknowledgment:
+#     "This product includes software developed by
+#      Roman V. Kiseliov <roman@kiseliov.ru>."
+# 
+#  4. Redistributions of any form whatsoever must retain the following
+#     acknowledgment:
+#     "This product includes software developed by
+#      Roman V. Kiseliov <roman@kiseliov.ru>."
+# 
+#  THIS SOFTWARE IS PROVIDED BY Roman V. Kiseliov ``AS IS'' AND ANY
+#  EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+#  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+#  PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL Roman V. Kiseliov OR
+#  ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+#  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+#  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+#  HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+#  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+#  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+#  OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+import sys
+import struct
+
+
+
+__rev_id__ = """$Id: CompoundDoc.py,v 1.7 2005/10/26 07:44:24 rvk Exp $"""
+
+        
+class Reader:
+    def __init__(self, filename, dump = False, doc=None ): # XXX modif. Emmanuel
+        self.dump = dump
+        self.STREAMS = {}
+        if doc is None:
+            doc = file(filename, 'rb').read()
+        self.header, self.data = doc[0:512], doc[512:]
+        del doc
+
+        self.__build_header()
+        self.__build_MSAT()
+        self.__build_SAT()
+        self.__build_directory()
+        self.__build_short_sectors_data()
+        
+        if len(self.short_sectors_data) > 0:
+            self.__build_SSAT()
+        else:
+            if self.dump and (self.total_ssat_sectors != 0 or self.ssat_start_sid != -2):
+                print 'NOTE: header says that must be', self.total_ssat_sectors, 'short sectors'
+                print 'NOTE: starting at', self.ssat_start_sid, 'sector'
+                print 'NOTE: but file does not contains data in short sectors'
+            self.ssat_start_sid = -2
+            self.total_ssat_sectors = 0
+            self.SSAT = [-2]
+
+        for dentry in self.dir_entry_list[1:]:
+            (did, 
+             sz, name, 
+             t, c, 
+             did_left, did_right, did_root, 
+             dentry_start_sid, 
+             stream_size
+            ) = dentry
+            stream_data = ''
+            if stream_size > 0:
+                if stream_size >= self.min_stream_size:
+                    args = (self.data, self.SAT, dentry_start_sid, self.sect_size)
+                else:
+                    args = (self.short_sectors_data, self.SSAT, dentry_start_sid, self.short_sect_size)
+                stream_data = self.get_stream_data(*args)
+
+            if name != '':
+                # BAD IDEA: names may be equal. NEED use full paths...
+                self.STREAMS[name] = stream_data
+
+    
+    def __build_header(self):
+        self.doc_magic             = self.header[0:8]
+
+        if self.doc_magic != '\xD0\xCF\x11\xE0\xA1\xB1\x1A\xE1':
+            raise Exception, 'Not an OLE file.'
+
+        self.file_uid              = self.header[8:24]
+        self.rev_num               = self.header[24:26]
+        self.ver_num               = self.header[26:28]
+        self.byte_order            = self.header[28:30]
+        self.log2_sect_size,       = struct.unpack('<H', self.header[30:32])
+        self.log2_short_sect_size, = struct.unpack('<H', self.header[32:34])
+        self.total_sat_sectors,    = struct.unpack('<L', self.header[44:48])
+        self.dir_start_sid,        = struct.unpack('<l', self.header[48:52])
+        self.min_stream_size,      = struct.unpack('<L', self.header[56:60])
+        self.ssat_start_sid,       = struct.unpack('<l', self.header[60:64])
+        self.total_ssat_sectors,   = struct.unpack('<L', self.header[64:68])
+        self.msat_start_sid,       = struct.unpack('<l', self.header[68:72])
+        self.total_msat_sectors,   = struct.unpack('<L', self.header[72:76])
+         
+        self.sect_size        = 1 << self.log2_sect_size
+        self.short_sect_size  = 1 << self.log2_short_sect_size
+
+        if self.dump:
+            print 'file magic: '
+            print_bin_data(self.doc_magic)
+
+            print 'file uid: '
+            print_bin_data(self.file_uid)
+
+            print 'revision number: '
+            print_bin_data(self.rev_num)
+         
+            print 'version number: '
+            print_bin_data(self.ver_num)
+            
+            print 'byte order: '
+            print_bin_data(self.byte_order)
+            
+            print 'sector size                                :', hex(self.sect_size), self.sect_size
+            #print 'total sectors in file                      :', hex(self.total_sectors), self.total_sectors
+            print 'short sector size                          :', hex(self.short_sect_size), self.short_sect_size
+            print 'Total number of sectors used for the SAT   :', hex(self.total_sat_sectors), self.total_sat_sectors
+            print 'SID of first sector of the directory stream:', hex(self.dir_start_sid), self.dir_start_sid
+            print 'Minimum size of a standard stream          :', hex(self.min_stream_size), self.min_stream_size
+            print 'SID of first sector of the SSAT            :', hex(self.ssat_start_sid), self.ssat_start_sid
+            print 'Total number of sectors used for the SSAT  :', hex(self.total_ssat_sectors), self.total_ssat_sectors
+            print 'SID of first additional sector of the MSAT :', hex(self.msat_start_sid), self.msat_start_sid
+            print 'Total number of sectors used for the MSAT  :', hex(self.total_msat_sectors), self.total_msat_sectors
+
+
+    def __build_MSAT(self):
+        self.MSAT = list(struct.unpack('<109l', self.header[76:]))
+        
+        next = self.msat_start_sid
+        while next > 0:
+           msat_sector = struct.unpack('<128l', self.data[next*self.sect_size:(next+1)*self.sect_size])
+           self.MSAT.extend(msat_sector[:127])
+           next = msat_sector[-1]
+
+        if self.dump:
+            print 'MSAT (header part): \n', self.MSAT[:109]
+            print 'additional MSAT sectors: \n', self.MSAT[109:]
+
+
+    def __build_SAT(self):
+        sat_stream = ''.join([self.data[i*self.sect_size:(i+1)*self.sect_size] for i in self.MSAT if i >= 0])
+
+        sat_sids_count = len(sat_stream) >> 2
+        self.SAT = struct.unpack('<%dl' % sat_sids_count, sat_stream) # SIDs tuple
+
+        if self.dump:
+            print 'SAT sid count:\n', sat_sids_count
+            print 'SAT content:\n', self.SAT
+
+
+    def __build_SSAT(self):
+        ssat_stream = self.get_stream_data(self.data, self.SAT, self.ssat_start_sid, self.sect_size)
+
+        ssids_count = len(ssat_stream) >> 2
+        self.SSAT = struct.unpack('<%dl' % ssids_count, ssat_stream)
+
+        if self.dump:
+            print 'SSID count:', ssids_count
+            print 'SSAT content:\n', self.SSAT
+
+
+    def __build_directory(self):
+        dir_stream = self.get_stream_data(self.data, self.SAT, self.dir_start_sid, self.sect_size)
+
+        self.dir_entry_list = []
+
+        i = 0
+        while i < len(dir_stream):
+            dentry = dir_stream[i:i+128] # 128 -- dir entry size
+            i += 128
+            
+            did = len(self.dir_entry_list)
+            sz, = struct.unpack('<H', dentry[64:66])
+            if sz > 0 :
+                name = dentry[0:sz-2].decode('utf_16_le', 'replace')
+            else:
+                name = u''
+            t,  = struct.unpack('B', dentry[66])
+            c,  = struct.unpack('B', dentry[67])
+            did_left ,  = struct.unpack('<l', dentry[68:72])
+            did_right ,  = struct.unpack('<l', dentry[72:76])
+            did_root ,  = struct.unpack('<l', dentry[76:80])
+            dentry_start_sid ,  = struct.unpack('<l', dentry[116:120])
+            stream_size ,  = struct.unpack('<L', dentry[120:124])
+
+            self.dir_entry_list.extend([(did, sz, name, t, c, 
+                                            did_left, did_right, did_root, 
+                                            dentry_start_sid, stream_size)]) 
+
+        if self.dump:
+            dentry_types = {
+                0x00: 'Empty',
+                0x01: 'User storage',
+                0x02: 'User stream',
+                0x03: 'LockBytes',
+                0x04: 'Property',
+                0x05: 'Root storage'
+            }
+            node_colours = {
+                0x00: 'Red',
+                0x01: 'Black'
+            }
+            print 'total directory entries:', len(self.dir_entry_list)
+
+            for dentry in self.dir_entry_list:
+                (did, sz, name, t, c, 
+                 did_left, did_right, did_root, 
+                 dentry_start_sid, stream_size) = dentry
+                print 'DID', did
+                print 'Size of the used area of the character buffer of the name:', sz
+                print 'dir entry name:', repr(name)
+                print 'type of entry:', t, dentry_types[t]
+                print 'entry colour:', c, node_colours[c]
+                print 'left child DID :', did_left
+                print 'right child DID:', did_right
+                print 'root DID       :', did_root
+                print 'start SID       :', dentry_start_sid
+                print 'stream size     :', stream_size
+                if stream_size == 0:
+                    print 'stream is empty'
+                elif stream_size >= self.min_stream_size:
+                    print 'stream stored as normal stream'
+                else:
+                    print 'stream stored as short-stream'
+
+    
+    def __build_short_sectors_data(self):
+        (did, sz, name, t, c, 
+         did_left, did_right, did_root, 
+         dentry_start_sid, stream_size) = self.dir_entry_list[0]
+        assert t == 0x05 # Short-Stream Container Stream (SSCS) resides in Root Storage
+        if stream_size == 0:
+            self.short_sectors_data = ''
+        else:
+            self.short_sectors_data = self.get_stream_data(self.data, self.SAT, dentry_start_sid, self.sect_size)
+
+
+    def get_stream_data(self, data, SAT, start_sid, sect_size):
+        sid = start_sid
+        chunks = [(sid, sid)]
+        stream_data = ''
+
+        while SAT[sid] >= 0:
+            next_in_chain = SAT[sid]
+            last_chunk_start, last_chunk_finish = chunks[-1]
+            if next_in_chain - last_chunk_finish <= 1:
+                chunks[-1] = last_chunk_start, next_in_chain
+            else:
+                chunks.extend([(next_in_chain, next_in_chain)]) 
+            sid = next_in_chain
+        for s, f in chunks:
+            stream_data += data[s*sect_size:(f+1)*sect_size]
+        #print chunks
+        return stream_data
+
+        
+def print_bin_data(data):
+    i = 0
+    while i < len(data):
+        j = 0
+        while (i < len(data)) and (j < 16):
+            c = '0x%02X' % ord(data[i])
+            sys.stdout.write(c)
+            sys.stdout.write(' ')
+            i += 1
+            j += 1
+        print
+    if i == 0:
+        print '<NO DATA>'
+
+
+
+# This implementation writes only 'Root Entry', 'Workbook' streams
+# and 2 empty streams for aligning directory stream on sector boundary
+# 
+# LAYOUT:
+# 0         header
+# 76                MSAT (1st part: 109 SID)
+# 512       workbook stream
+# ...       additional MSAT sectors if streams' size > about 7 Mb == (109*512 * 128)
+# ...       SAT
+# ...       directory stream
+#
+# NOTE: this layout is "ad hoc". It can be more general. RTFM
+
+class XlsDoc:
+    SECTOR_SIZE = 0x0200
+    MIN_LIMIT   = 0x1000
+
+    SID_FREE_SECTOR  = -1
+    SID_END_OF_CHAIN = -2
+    SID_USED_BY_SAT  = -3
+    SID_USED_BY_MSAT = -4
+
+    def __init__(self):
+        #self.book_stream = ''                # padded
+        self.book_stream_sect = []
+
+        self.dir_stream = ''
+        self.dir_stream_sect = []
+
+        self.packed_SAT = ''
+        self.SAT_sect = []
+
+        self.packed_MSAT_1st = ''
+        self.packed_MSAT_2nd = ''
+        self.MSAT_sect_2nd = []
+
+        self.header = ''
+
+    def __build_directory(self): # align on sector boundary
+        self.dir_stream = ''
+
+        dentry_name      = '\x00'.join('Root Entry\x00') + '\x00'
+        dentry_name_sz   = len(dentry_name)
+        dentry_name_pad  = '\x00'*(64 - dentry_name_sz)
+        dentry_type      = 0x05 # root storage
+        dentry_colour    = 0x01 # black
+        dentry_did_left  = -1
+        dentry_did_right = -1
+        dentry_did_root  = 1
+        dentry_start_sid = -2
+        dentry_stream_sz = 0
+
+        self.dir_stream += struct.pack('<64s H 2B 3l 9L l L L',
+           dentry_name + dentry_name_pad,
+           dentry_name_sz,
+           dentry_type,
+           dentry_colour,
+           dentry_did_left, 
+           dentry_did_right,
+           dentry_did_root,
+           0, 0, 0, 0, 0, 0, 0, 0, 0,
+           dentry_start_sid,
+           dentry_stream_sz,
+           0
+        )
+
+        dentry_name      = '\x00'.join('Workbook\x00') + '\x00'
+        dentry_name_sz   = len(dentry_name)
+        dentry_name_pad  = '\x00'*(64 - dentry_name_sz)
+        dentry_type      = 0x02 # user stream
+        dentry_colour    = 0x01 # black
+        dentry_did_left  = -1
+        dentry_did_right = -1
+        dentry_did_root  = -1
+        dentry_start_sid = 0     
+        dentry_stream_sz = self.book_stream_len
+
+        self.dir_stream += struct.pack('<64s H 2B 3l 9L l L L',
+           dentry_name + dentry_name_pad,
+           dentry_name_sz,
+           dentry_type,
+           dentry_colour,
+           dentry_did_left, 
+           dentry_did_right,
+           dentry_did_root,
+           0, 0, 0, 0, 0, 0, 0, 0, 0, 
+           dentry_start_sid,
+           dentry_stream_sz,
+           0
+        )
+        
+        # padding
+        dentry_name      = ''
+        dentry_name_sz   = len(dentry_name)
+        dentry_name_pad  = '\x00'*(64 - dentry_name_sz)
+        dentry_type      = 0x00 # empty
+        dentry_colour    = 0x01 # black
+        dentry_did_left  = -1
+        dentry_did_right = -1
+        dentry_did_root  = -1
+        dentry_start_sid = -2
+        dentry_stream_sz = 0
+
+        self.dir_stream += struct.pack('<64s H 2B 3l 9L l L L',
+           dentry_name + dentry_name_pad,
+           dentry_name_sz,
+           dentry_type,
+           dentry_colour,
+           dentry_did_left, 
+           dentry_did_right,
+           dentry_did_root,
+           0, 0, 0, 0, 0, 0, 0, 0, 0,
+           dentry_start_sid,
+           dentry_stream_sz,
+           0
+        ) * 2
+    
+    def __build_sat(self):
+        # Build SAT
+        book_sect_count = self.book_stream_len >> 9
+        dir_sect_count  = len(self.dir_stream) >> 9
+        
+        total_sect_count     = book_sect_count + dir_sect_count
+        SAT_sect_count       = 0
+        MSAT_sect_count      = 0
+        SAT_sect_count_limit = 109
+        while total_sect_count > 128*SAT_sect_count or SAT_sect_count > SAT_sect_count_limit:
+            SAT_sect_count   += 1
+            total_sect_count += 1
+            if SAT_sect_count > SAT_sect_count_limit:
+                MSAT_sect_count      += 1
+                total_sect_count     += 1
+                SAT_sect_count_limit += 127
+
+
+        SAT = [self.SID_FREE_SECTOR]*128*SAT_sect_count
+
+        sect = 0
+        while sect < book_sect_count - 1:
+            self.book_stream_sect.append(sect)
+            SAT[sect] = sect + 1
+            sect += 1
+        self.book_stream_sect.append(sect)
+        SAT[sect] = self.SID_END_OF_CHAIN
+        sect += 1
+
+        while sect < book_sect_count + MSAT_sect_count:
+            self.MSAT_sect_2nd.append(sect)
+            SAT[sect] = self.SID_USED_BY_MSAT
+            sect += 1
+
+        while sect < book_sect_count + MSAT_sect_count + SAT_sect_count:
+            self.SAT_sect.append(sect)            
+            SAT[sect] = self.SID_USED_BY_SAT
+            sect += 1
+
+        while sect < book_sect_count + MSAT_sect_count + SAT_sect_count + dir_sect_count - 1:
+            self.dir_stream_sect.append(sect)
+            SAT[sect] = sect + 1
+            sect += 1
+        self.dir_stream_sect.append(sect)
+        SAT[sect] = self.SID_END_OF_CHAIN
+        sect += 1
+
+        self.packed_SAT = struct.pack('<%dl' % (SAT_sect_count*128), *SAT)
+
+        MSAT_1st = [self.SID_FREE_SECTOR]*109
+        for i, SAT_sect_num in zip(range(0, 109), self.SAT_sect):
+            MSAT_1st[i] = SAT_sect_num
+        self.packed_MSAT_1st = struct.pack('<109l', *MSAT_1st)
+
+        MSAT_2nd = [self.SID_FREE_SECTOR]*128*MSAT_sect_count
+        if MSAT_sect_count > 0:
+            MSAT_2nd[- 1] = self.SID_END_OF_CHAIN
+
+        i = 109
+        msat_sect = 0
+        sid_num = 0
+        while i < SAT_sect_count:
+            if (sid_num + 1) % 128 == 0:
+                #print 'link: ',
+                msat_sect += 1
+                if msat_sect < len(self.MSAT_sect_2nd):
+                    MSAT_2nd[sid_num] = self.MSAT_sect_2nd[msat_sect]
+            else:
+                #print 'sid: ',
+                MSAT_2nd[sid_num] = self.SAT_sect[i]
+                i += 1
+            #print sid_num, MSAT_2nd[sid_num]
+            sid_num += 1
+
+        self.packed_MSAT_2nd = struct.pack('<%dl' % (MSAT_sect_count*128), *MSAT_2nd)
+
+        #print vars()
+        #print zip(range(0, sect), SAT)
+        #print self.book_stream_sect
+        #print self.MSAT_sect_2nd
+        #print MSAT_2nd
+        #print self.SAT_sect
+        #print self.dir_stream_sect
+
+
+    def __build_header(self):
+        doc_magic             = '\xD0\xCF\x11\xE0\xA1\xB1\x1A\xE1'
+        file_uid              = '\x00'*16
+        rev_num               = '\x3E\x00'
+        ver_num               = '\x03\x00'
+        byte_order            = '\xFE\xFF'
+        log_sect_size         = struct.pack('<H', 9)
+        log_short_sect_size   = struct.pack('<H', 6)
+        not_used0             = '\x00'*10
+        total_sat_sectors     = struct.pack('<L', len(self.SAT_sect))
+        dir_start_sid         = struct.pack('<l', self.dir_stream_sect[0])
+        not_used1             = '\x00'*4        
+        min_stream_size       = struct.pack('<L', 0x1000)
+        ssat_start_sid        = struct.pack('<l', -2)
+        total_ssat_sectors    = struct.pack('<L', 0)
+
+        if len(self.MSAT_sect_2nd) == 0:
+            msat_start_sid        = struct.pack('<l', -2)
+        else:
+            msat_start_sid        = struct.pack('<l', self.MSAT_sect_2nd[0])
+
+        total_msat_sectors    = struct.pack('<L', len(self.MSAT_sect_2nd))
+
+        self.header =       ''.join([  doc_magic,
+                                        file_uid,
+                                        rev_num,
+                                        ver_num,
+                                        byte_order,
+                                        log_sect_size,
+                                        log_short_sect_size,
+                                        not_used0,
+                                        total_sat_sectors,
+                                        dir_start_sid,
+                                        not_used1,
+                                        min_stream_size,
+                                        ssat_start_sid,
+                                        total_ssat_sectors,
+                                        msat_start_sid,
+                                        total_msat_sectors
+                                    ])
+                                        
+
+    def save(self, filename, stream):
+        # 1. Align stream on 0x1000 boundary (and therefore on sector boundary)
+        padding = '\x00' * (0x1000 - (len(stream) % 0x1000))
+        self.book_stream_len = len(stream) + len(padding)
+
+        self.__build_directory()
+        self.__build_sat()
+        self.__build_header()
+        
+        f = file(filename, 'wb')
+        f.write(self.header)
+        f.write(self.packed_MSAT_1st)
+        f.write(stream)
+        f.write(padding)
+        f.write(self.packed_MSAT_2nd)
+        f.write(self.packed_SAT)
+        f.write(self.dir_stream)
+        f.close()
+
+    def savetostr(self, stream): # XXX added by Emmanuel
+        # 1. Align stream on 0x1000 boundary (and therefore on sector boundary)
+        padding = '\x00' * (0x1000 - (len(stream) % 0x1000))
+        self.book_stream_len = len(stream) + len(padding)
+
+        self.__build_directory()
+        self.__build_sat()
+        self.__build_header()
+        
+        return self.header+self.packed_MSAT_1st+stream+padding+self.packed_MSAT_2nd+self.packed_SAT+self.dir_stream
+
+if __name__ == '__main__':
+    d = XlsDoc()
+    d.save('a.aaa', 'b'*17000)
+
+
+
+
+

config/softs/pyExcelerator-0.6.3a.patched/pyExcelerator/Deco.py

@@ -0,0 +1,61 @@
+# This code from 
+
+# PEP: 318 
+# Title: Decorators for Functions and Methods 
+# Version: 1.35 
+# Last-Modified: 2004/09/14 07:34:23 
+# Author: Kevin D. Smith, Jim Jewett, Skip Montanaro, Anthony Baxter 
+
+# This code fixes error in example 4: 
+# authors' code contains
+#       @accepts(int, (int,float))
+#       @returns((int,float))
+#       def func(arg1, arg2):
+#           return arg1 * arg2
+# 
+# It should be:
+#       @returns((int,float))
+#       @accepts(int, (int,float))
+#       def func(arg1, arg2):
+#           return arg1 * arg2
+# because of decorators are applied from bottom to up.
+
+
+__rev_id__ = """$Id: Deco.py,v 1.4 2005/07/20 07:24:11 rvk Exp $"""
+
+
+def accepts(*types):
+    #print types
+    def check_accepts(f):
+        assert len(types) == f.func_code.co_argcount
+        def new_f(*args, **kwds):
+            for (a, t) in zip(args, types):
+                assert isinstance(a, t), \
+                       "arg %r does not match %s" % (a,t)
+            return f(*args, **kwds)
+        new_f.func_name = f.func_name
+        return new_f
+    return check_accepts
+
+def returns(rtype):
+    def check_returns(f):
+        def new_f(*args, **kwds):
+            result = f(*args, **kwds)
+            assert isinstance(result, rtype), \
+                   "return value %r does not match %s" % (result,rtype)
+            return result
+        new_f.func_name = f.func_name
+        return new_f
+    return check_returns
+
+
+if __name__ == '__main__':
+    import types 
+
+##    @returns(types.NoneType)
+##    @accepts(int, (int,float))
+    def func(arg1, arg2):
+        #return str(arg1 * arg2)
+        pass
+
+    func(1, 2)      

config/softs/pyExcelerator-0.6.3a.patched/pyExcelerator/ExcelFormula.py

@@ -0,0 +1,76 @@
+#!/usr/bin/env python
+# -*- coding: windows-1251 -*-
+
+#  Copyright (C) 2005 Roman V. Kiseliov
+#  All rights reserved.
+# 
+#  Redistribution and use in source and binary forms, with or without
+#  modification, are permitted provided that the following conditions
+#  are met:
+# 
+#  1. Redistributions of source code must retain the above copyright
+#     notice, this list of conditions and the following disclaimer.
+# 
+#  2. Redistributions in binary form must reproduce the above copyright
+#     notice, this list of conditions and the following disclaimer in
+#     the documentation and/or other materials provided with the
+#     distribution.
+# 
+#  3. All advertising materials mentioning features or use of this
+#     software must display the following acknowledgment:
+#     "This product includes software developed by
+#      Roman V. Kiseliov <roman@kiseliov.ru>."
+# 
+#  4. Redistributions of any form whatsoever must retain the following
+#     acknowledgment:
+#     "This product includes software developed by
+#      Roman V. Kiseliov <roman@kiseliov.ru>."
+# 
+#  THIS SOFTWARE IS PROVIDED BY Roman V. Kiseliov ``AS IS'' AND ANY
+#  EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+#  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+#  PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL Roman V. Kiseliov OR
+#  ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+#  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+#  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+#  HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+#  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+#  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+#  OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+__rev_id__ = """$Id: ExcelFormula.py,v 1.3 2005/08/11 08:53:48 rvk Exp $"""
+
+
+import ExcelFormulaParser, ExcelFormulaLexer
+import struct
+from antlr import ANTLRException
+
+
+class Formula(object):
+    __slots__ = ["__init__", "text", "rpn", "__s", "__parser"]
+
+
+    def __init__(self, s):
+        try:
+            self.__s = s
+            lexer = ExcelFormulaLexer.Lexer(s)
+            self.__parser = ExcelFormulaParser.Parser(lexer)
+            self.__parser.formula()
+        except ANTLRException:
+            raise Exception, "can't parse formula " + s
+
+    def text(self):
+        return self.__s
+
+    def rpn(self):
+        '''
+        Offset    Size    Contents
+        0         2       Size of the following formula data (sz)
+        2         sz      Formula data (RPN token array)
+        [2+sz]    var.    (optional) Additional data for specific tokens
+
+        '''
+        return struct.pack("<H", len(self.__parser.rpn)) + self.__parser.rpn
+

config/softs/pyExcelerator-0.6.3a.patched/pyExcelerator/ExcelFormulaLexer.py

@@ -0,0 +1,158 @@
+#!/usr/bin/env python
+# -*- coding: windows-1251 -*-
+
+#  Copyright (C) 2005 Roman V. Kiseliov
+#  All rights reserved.
+#
+#  Redistribution and use in source and binary forms, with or without
+#  modification, are permitted provided that the following conditions
+#  are met:
+#
+#  1. Redistributions of source code must retain the above copyright
+#     notice, this list of conditions and the following disclaimer.
+#
+#  2. Redistributions in binary form must reproduce the above copyright
+#     notice, this list of conditions and the following disclaimer in
+#     the documentation and/or other materials provided with the
+#     distribution.
+#
+#  3. All advertising materials mentioning features or use of this
+#     software must display the following acknowledgment:
+#     "This product includes software developed by
+#      Roman V. Kiseliov <roman@kiseliov.ru>."
+#
+#  4. Redistributions of any form whatsoever must retain the following
+#     acknowledgment:
+#     "This product includes software developed by
+#      Roman V. Kiseliov <roman@kiseliov.ru>."
+#
+#  THIS SOFTWARE IS PROVIDED BY Roman V. Kiseliov ``AS IS'' AND ANY
+#  EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+#  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+#  PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL Roman V. Kiseliov OR
+#  ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+#  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+#  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+#  HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+#  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+#  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+#  OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+__rev_id__ = """$Id: ExcelFormulaLexer.py,v 1.4 2005/08/14 06:40:23 rvk Exp $"""
+
+
+import sys
+from antlr import EOF, CommonToken as Tok, TokenStream, TokenStreamException
+import struct
+import ExcelFormulaParser
+from re import compile as recompile, match, LOCALE, UNICODE, IGNORECASE
+
+
+int_const_pattern = recompile(r"\d+")
+flt_const_pattern = recompile(r"\d*\.\d+(?:[Ee][+-]?\d+)?")
+str_const_pattern = recompile(r'["][^"]*["]')
+#range2d_pattern   = recompile(r"\$?[A-I]?[A-Z]\$?\d+:\$?[A-I]?[A-Z]\$?\d+")
+ref2d_pattern     = recompile(r"\$?[A-I]?[A-Z]\$?\d+")
+true_pattern      = recompile(r"TRUE", IGNORECASE)
+false_pattern     = recompile(r"FALSE", IGNORECASE)
+name_pattern      = recompile(r"[\.\w]+", LOCALE)
+
+pattern_type_tuples = (
+    (flt_const_pattern, ExcelFormulaParser.NUM_CONST),
+    (int_const_pattern, ExcelFormulaParser.INT_CONST),
+    (str_const_pattern, ExcelFormulaParser.STR_CONST),
+#    (range2d_pattern  , ExcelFormulaParser.RANGE2D),
+    (ref2d_pattern    , ExcelFormulaParser.REF2D),
+    (true_pattern     , ExcelFormulaParser.TRUE_CONST),
+    (false_pattern    , ExcelFormulaParser.FALSE_CONST),
+    (name_pattern     , ExcelFormulaParser.NAME)
+)
+
+
+type_text_tuples = (
+    (ExcelFormulaParser.NE, '<>'),
+    (ExcelFormulaParser.LE, '<='),
+    (ExcelFormulaParser.GE, '>='),
+    (ExcelFormulaParser.EQ, '='),
+    (ExcelFormulaParser.LT, '<'),
+    (ExcelFormulaParser.GT, '>'),
+    (ExcelFormulaParser.ADD, '+'),
+    (ExcelFormulaParser.SUB, '-'),
+    (ExcelFormulaParser.MUL, '*'),
+    (ExcelFormulaParser.DIV, '/'),
+    (ExcelFormulaParser.COLON, ':'),
+    (ExcelFormulaParser.SEMICOLON, ';'),
+    (ExcelFormulaParser.COMMA, ','),
+    (ExcelFormulaParser.LP, '('),
+    (ExcelFormulaParser.RP, ')'),
+    (ExcelFormulaParser.CONCAT, '&'),
+    (ExcelFormulaParser.PERCENT, '%'),
+    (ExcelFormulaParser.POWER, '^')
+)
+
+
+class Lexer(TokenStream):
+    def __init__(self, text):
+        self._text = text[:]
+        self._pos = 0
+        self._line = 0
+
+
+    def isEOF(self):
+        return len(self._text) <= self._pos
+
+
+    def curr_ch(self):
+        return self._text[self._pos]
+
+
+    def next_ch(self, n = 1):
+        self._pos += n
+
+
+    def is_whitespace(self):
+        return self.curr_ch() in " \t\n\r\f\v"
+
+
+    def match_pattern(self, pattern, toktype):
+        m = pattern.match(self._text[self._pos:])
+        if m:
+            start_pos = self._pos + m.start(0)
+            end_pos = self._pos + m.end(0)
+            tt = self._text[start_pos:end_pos]
+            self._pos = end_pos
+            return Tok(type = toktype, text = tt, col = start_pos + 1)
+        else:
+            return None
+
+
+    def nextToken(self):
+        # skip whitespace
+        while not self.isEOF() and self.is_whitespace():
+            self.next_ch()
+        if self.isEOF():
+            return Tok(type = EOF)
+        # first, try to match token with more chars
+        for ptt in pattern_type_tuples:
+            t = self.match_pattern(*ptt);
+            if t:
+                return t
+        # second, we want find short tokens
+        for ty, te in type_text_tuples:
+            if self.curr_ch() == te:
+                self.next_ch()
+                return Tok(type = ty, text = te, col = self._pos)
+        # at this point, smth strange is happened
+        raise TokenStreamException("Unknown char %s at %u col." % (self.curr_ch(), self._pos))
+
+
+if __name__ == '__main__' :
+    import locale
+    locale.setlocale(locale.LC_ALL, 'russian')
+    try:
+        for t in Lexer('1+2+3+67.8678 + " @##$$$ klhkh kljhklhkl " + .58e-678*A1:B4 - 1lkjljlkjl3535ïîðïîð'):
+            print t
+    except TokenStreamException, e:
+        print "error:", e

config/softs/pyExcelerator-0.6.3a.patched/pyExcelerator/ExcelFormulaParser.py

@@ -0,0 +1,457 @@
+### $ANTLR 2.7.5 (20050128): "excel-formula.g" -> "ExcelFormulaParser.py"$
+### import antlr and other modules ..
+import sys
+import antlr
+
+version = sys.version.split()[0]
+if version < '2.2.1':
+    False = 0
+if version < '2.3':
+    True = not False
+### header action >>> 
+__rev_id__ = """$Id: ExcelFormulaParser.py,v 1.4 2005/08/14 06:40:23 rvk Exp $"""
+
+import struct
+import Utils
+from UnicodeUtils import upack1
+from ExcelMagic import *
+### header action <<< 
+### preamble action>>>
+
+### preamble action <<<
+
+### import antlr.Token 
+from antlr import Token
+### >>>The Known Token Types <<<
+SKIP                = antlr.SKIP
+INVALID_TYPE        = antlr.INVALID_TYPE
+EOF_TYPE            = antlr.EOF_TYPE
+EOF                 = antlr.EOF
+NULL_TREE_LOOKAHEAD = antlr.NULL_TREE_LOOKAHEAD
+MIN_USER_TYPE       = antlr.MIN_USER_TYPE
+TRUE_CONST = 4
+FALSE_CONST = 5
+STR_CONST = 6
+NUM_CONST = 7
+INT_CONST = 8
+NAME = 9
+EQ = 10
+NE = 11
+GT = 12
+LT = 13
+GE = 14
+LE = 15
+ADD = 16
+SUB = 17
+MUL = 18
+DIV = 19
+POWER = 20
+PERCENT = 21
+LP = 22
+RP = 23
+LB = 24
+RB = 25
+COLON = 26
+COMMA = 27
+SEMICOLON = 28
+CONCAT = 29
+REF2D = 30
+
+class Parser(antlr.LLkParser):
+    ### user action >>>
+    ### user action <<<
+    
+    def __init__(self, *args, **kwargs):
+        antlr.LLkParser.__init__(self, *args, **kwargs)
+        self.tokenNames = _tokenNames
+        ### __init__ header action >>> 
+        self.rpn = ""
+        ### __init__ header action <<< 
+        
+    def formula(self):    
+        
+        pass
+        self.expr("V")
+    
+    def expr(self,
+        arg_type
+    ):    
+        
+        pass
+        self.prec0_expr(arg_type)
+        while True:
+            if ((self.LA(1) >= EQ and self.LA(1) <= LE)):
+                pass
+                la1 = self.LA(1)
+                if False:
+                    pass
+                elif la1 and la1 in [EQ]:
+                    pass
+                    self.match(EQ)
+                    op = struct.pack('B', ptgEQ)
+                elif la1 and la1 in [NE]:
+                    pass
+                    self.match(NE)
+                    op = struct.pack('B', ptgNE)
+                elif la1 and la1 in [GT]:
+                    pass
+                    self.match(GT)
+                    op = struct.pack('B', ptgGE)
+                elif la1 and la1 in [LT]:
+                    pass
+                    self.match(LT)
+                    op = struct.pack('B', ptgLT)
+                elif la1 and la1 in [GE]:
+                    pass
+                    self.match(GE)
+                    op = struct.pack('B', ptgGE)
+                elif la1 and la1 in [LE]:
+                    pass
+                    self.match(LE)
+                    op = struct.pack('B', ptgLE)
+                else:
+                        raise antlr.NoViableAltException(self.LT(1), self.getFilename())
+                    
+                self.prec0_expr(arg_type)
+                self.rpn += op
+            else:
+                break
+            
+    
+    def prec0_expr(self,
+        arg_type
+    ):    
+        
+        pass
+        self.prec1_expr(arg_type)
+        while True:
+            if (self.LA(1)==CONCAT):
+                pass
+                pass
+                self.match(CONCAT)
+                op = struct.pack('B', ptgConcat)
+                self.prec1_expr(arg_type)
+                self.rpn += op
+            else:
+                break
+            
+    
+    def prec1_expr(self,
+        arg_type
+    ):    
+        
+        pass
+        self.prec2_expr(arg_type)
+        while True:
+            if (self.LA(1)==ADD or self.LA(1)==SUB):
+                pass
+                la1 = self.LA(1)
+                if False:
+                    pass
+                elif la1 and la1 in [ADD]:
+                    pass
+                    self.match(ADD)
+                    op = struct.pack('B', ptgAdd)
+                elif la1 and la1 in [SUB]:
+                    pass
+                    self.match(SUB)
+                    op = struct.pack('B', ptgSub)
+                else:
+                        raise antlr.NoViableAltException(self.LT(1), self.getFilename())
+                    
+                self.prec2_expr(arg_type)
+                self.rpn += op
+            else:
+                break
+            
+    
+    def prec2_expr(self,
+        arg_type
+    ):    
+        
+        pass
+        self.prec3_expr(arg_type)
+        while True:
+            if (self.LA(1)==MUL or self.LA(1)==DIV):
+                pass
+                la1 = self.LA(1)
+                if False:
+                    pass
+                elif la1 and la1 in [MUL]:
+                    pass
+                    self.match(MUL)
+                    op = struct.pack('B', ptgMul)
+                elif la1 and la1 in [DIV]:
+                    pass
+                    self.match(DIV)
+                    op = struct.pack('B', ptgDiv)
+                else:
+                        raise antlr.NoViableAltException(self.LT(1), self.getFilename())
+                    
+                self.prec3_expr(arg_type)
+                self.rpn += op
+            else:
+                break
+            
+    
+    def prec3_expr(self,
+        arg_type
+    ):    
+        
+        pass
+        self.prec4_expr(arg_type)
+        while True:
+            if (self.LA(1)==POWER):
+                pass
+                pass
+                self.match(POWER)
+                op = struct.pack('B', ptgPower)
+                self.prec4_expr(arg_type)
+                self.rpn += op
+            else:
+                break
+            
+    
+    def prec4_expr(self,
+        arg_type
+    ):    
+        
+        pass
+        self.prec5_expr(arg_type)
+        la1 = self.LA(1)
+        if False:
+            pass
+        elif la1 and la1 in [PERCENT]:
+            pass
+            self.match(PERCENT)
+            self.rpn += struct.pack('B', ptgPercent)
+        elif la1 and la1 in [EOF,EQ,NE,GT,LT,GE,LE,ADD,SUB,MUL,DIV,POWER,RP,SEMICOLON,CONCAT]:
+            pass
+        else:
+                raise antlr.NoViableAltException(self.LT(1), self.getFilename())
+            
+    
+    def prec5_expr(self,
+        arg_type
+    ):    
+        
+        la1 = self.LA(1)
+        if False:
+            pass
+        elif la1 and la1 in [TRUE_CONST,FALSE_CONST,STR_CONST,NUM_CONST,INT_CONST,NAME,LP,REF2D]:
+            pass
+            self.primary(arg_type)
+        elif la1 and la1 in [SUB]:
+            pass
+            self.match(SUB)
+            self.primary(arg_type)
+            self.rpn += struct.pack('B', ptgUminus)
+        else:
+                raise antlr.NoViableAltException(self.LT(1), self.getFilename())
+            
+    
+    def primary(self,
+        arg_type
+    ):    
+        
+        str_tok = None
+        int_tok = None
+        num_tok = None
+        ref2d_tok = None
+        ref2d1_tok = None
+        ref2d2_tok = None
+        name_tok = None
+        func_tok = None
+        la1 = self.LA(1)
+        if False:
+            pass
+        elif la1 and la1 in [TRUE_CONST]:
+            pass
+            self.match(TRUE_CONST)
+            self.rpn += struct.pack("2B", ptgBool, 1)
+        elif la1 and la1 in [FALSE_CONST]:
+            pass
+            self.match(FALSE_CONST)
+            self.rpn += struct.pack("2B", ptgBool, 0)
+        elif la1 and la1 in [STR_CONST]:
+            pass
+            str_tok = self.LT(1)
+            self.match(STR_CONST)
+            self.rpn += struct.pack("B", ptgStr) + upack1(str_tok.text[1:-1])
+        elif la1 and la1 in [INT_CONST]:
+            pass
+            int_tok = self.LT(1)
+            self.match(INT_CONST)
+            self.rpn += struct.pack("<BH", ptgInt, int(int_tok.text))
+        elif la1 and la1 in [NUM_CONST]:
+            pass
+            num_tok = self.LT(1)
+            self.match(NUM_CONST)
+            self.rpn += struct.pack("<Bd", ptgNum, float(num_tok.text))
+        elif la1 and la1 in [LP]:
+            pass
+            self.match(LP)
+            self.expr(arg_type)
+            self.match(RP)
+            self.rpn += struct.pack("B", ptgParen)
+        else:
+            if (self.LA(1)==REF2D) and (_tokenSet_0.member(self.LA(2))):
+                pass
+                ref2d_tok = self.LT(1)
+                self.match(REF2D)
+                r, c = Utils.cell_to_packed_rowcol(ref2d_tok.text)
+                if arg_type == "R":
+                   self.rpn += struct.pack("<B2H", ptgRefR, r, c)
+                else:
+                   self.rpn += struct.pack("<B2H", ptgRefV, r, c)
+            elif (self.LA(1)==REF2D) and (self.LA(2)==COLON):
+                pass
+                ref2d1_tok = self.LT(1)
+                self.match(REF2D)
+                self.match(COLON)
+                ref2d2_tok = self.LT(1)
+                self.match(REF2D)
+                r1, c1 = Utils.cell_to_packed_rowcol(ref2d1_tok.text)
+                r2, c2 = Utils.cell_to_packed_rowcol(ref2d2_tok.text)
+                if arg_type == "R":
+                   self.rpn += struct.pack("<B4H", ptgAreaR, r1, r2, c1, c2)
+                else:
+                   self.rpn += struct.pack("<B4H", ptgAreaV, r1, r2, c1, c2)
+            elif (self.LA(1)==NAME) and (_tokenSet_0.member(self.LA(2))):
+                pass
+                name_tok = self.LT(1)
+                self.match(NAME)
+                self.rpn += ""
+            elif (self.LA(1)==NAME) and (self.LA(2)==LP):
+                pass
+                func_tok = self.LT(1)
+                self.match(NAME)
+                if func_tok.text.upper() in std_func_by_name:
+                   (opcode,
+                   min_argc,
+                   max_argc,
+                   func_type,
+                   arg_type_list,
+                   volatile_func) = std_func_by_name[func_tok.text.upper()]
+                else:
+                   raise Exception, "unknown function: %s" % func_tok.text
+                self.match(LP)
+                arg_count=self.expr_list(arg_type_list, min_argc, max_argc)
+                self.match(RP)
+                if arg_count > max_argc or arg_count < min_argc:
+                   raise Exception, "%d parameters for function: %s" % (arg_count, func_tok.text)
+                if min_argc == max_argc:
+                   if func_type == "V":
+                       func_ptg = ptgFuncV
+                   elif func_type == "R":
+                       func_ptg = ptgFuncR
+                   elif func_type == "A":
+                       func_ptg = ptgFuncA
+                   else:
+                       raise Exception, "wrong function type"
+                   self.rpn += struct.pack("<BH", func_ptg, opcode)
+                else:
+                   if func_type == "V":
+                       func_ptg = ptgFuncVarV
+                   elif func_type == "R":
+                       func_ptg = ptgFuncVarR
+                   elif func_type == "A":
+                       func_ptg = ptgFuncVarA
+                   else:
+                       raise Exception, "wrong function type"
+                   self.rpn += struct.pack("<2BH", func_ptg, arg_count, opcode)
+            else:
+                raise antlr.NoViableAltException(self.LT(1), self.getFilename())
+            
+    
+    def expr_list(self,
+        arg_type_list, min_argc, max_argc
+    ):    
+        arg_cnt = None
+        
+        arg_cnt = 0
+        arg_type_list = arg_type_list.split()
+        arg_type = arg_type_list[arg_cnt]
+        la1 = self.LA(1)
+        if False:
+            pass
+        elif la1 and la1 in [TRUE_CONST,FALSE_CONST,STR_CONST,NUM_CONST,INT_CONST,NAME,SUB,LP,REF2D]:
+            pass
+            self.expr(arg_type)
+            arg_cnt += 1
+            while True:
+                if (self.LA(1)==SEMICOLON):
+                    pass
+                    if arg_cnt < len(arg_type_list):
+                       arg_type = arg_type_list[arg_cnt]
+                    else:
+                       arg_type = arg_type_list[-1]
+                    if arg_type == "...":
+                       arg_type = arg_type_list[-2]
+                    self.match(SEMICOLON)
+                    la1 = self.LA(1)
+                    if False:
+                        pass
+                    elif la1 and la1 in [TRUE_CONST,FALSE_CONST,STR_CONST,NUM_CONST,INT_CONST,NAME,SUB,LP,REF2D]:
+                        pass
+                        self.expr(arg_type)
+                    elif la1 and la1 in [RP,SEMICOLON]:
+                        pass
+                        self.rpn += struct.pack("B", ptgMissArg)
+                    else:
+                            raise antlr.NoViableAltException(self.LT(1), self.getFilename())
+                        
+                    arg_cnt += 1
+                else:
+                    break
+                
+        elif la1 and la1 in [RP]:
+            pass
+        else:
+                raise antlr.NoViableAltException(self.LT(1), self.getFilename())
+            
+        return arg_cnt
+    
+
+_tokenNames = [
+    "<0>", 
+    "EOF", 
+    "<2>", 
+    "NULL_TREE_LOOKAHEAD", 
+    "TRUE_CONST", 
+    "FALSE_CONST", 
+    "STR_CONST", 
+    "NUM_CONST", 
+    "INT_CONST", 
+    "NAME", 
+    "EQ", 
+    "NE", 
+    "GT", 
+    "LT", 
+    "GE", 
+    "LE", 
+    "ADD", 
+    "SUB", 
+    "MUL", 
+    "DIV", 
+    "POWER", 
+    "PERCENT", 
+    "LP", 
+    "RP", 
+    "LB", 
+    "RB", 
+    "COLON", 
+    "COMMA", 
+    "SEMICOLON", 
+    "CONCAT", 
+    "REF2D"
+]
+    
+
+### generate bit set
+def mk_tokenSet_0(): 
+    ### var1
+    data = [ 817888258L, 0L]
+    return data
+_tokenSet_0 = antlr.BitSet(mk_tokenSet_0())
+    

config/softs/pyExcelerator-0.6.3a.patched/pyExcelerator/Formatting.py

@@ -0,0 +1,278 @@
+#!/usr/bin/env python
+# -*- coding: windows-1251 -*-
+
+#  Copyright (C) 2005 Roman V. Kiseliov
+#  All rights reserved.
+# 
+#  Redistribution and use in source and binary forms, with or without
+#  modification, are permitted provided that the following conditions
+#  are met:
+# 
+#  1. Redistributions of source code must retain the above copyright
+#     notice, this list of conditions and the following disclaimer.
+# 
+#  2. Redistributions in binary form must reproduce the above copyright
+#     notice, this list of conditions and the following disclaimer in
+#     the documentation and/or other materials provided with the
+#     distribution.
+# 
+#  3. All advertising materials mentioning features or use of this
+#     software must display the following acknowledgment:
+#     "This product includes software developed by
+#      Roman V. Kiseliov <roman@kiseliov.ru>."
+# 
+#  4. Redistributions of any form whatsoever must retain the following
+#     acknowledgment:
+#     "This product includes software developed by
+#      Roman V. Kiseliov <roman@kiseliov.ru>."
+# 
+#  THIS SOFTWARE IS PROVIDED BY Roman V. Kiseliov ``AS IS'' AND ANY
+#  EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+#  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+#  PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL Roman V. Kiseliov OR
+#  ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+#  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+#  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+#  HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+#  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+#  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+#  OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+
+'''
+The  XF  record is able to store explicit cell formatting attributes or the
+attributes  of  a cell style. Explicit formatting includes the reference to
+a  cell  style  XF  record. This allows to extend a defined cell style with
+some  explicit  attributes.  The  formatting  attributes  are  divided into
+6 groups:
+
+Group           Attributes
+-------------------------------------
+Number format   Number format index (index to FORMAT record)
+Font            Font index (index to FONT record)
+Alignment       Horizontal and vertical alignment, text wrap, indentation, 
+                orientation/rotation, text direction
+Border          Border line styles and colours
+Background      Background area style and colours
+Protection      Cell locked, formula hidden
+
+For  each  group  a flag in the cell XF record specifies whether to use the
+attributes  contained  in  that  XF  record  or  in  the  referenced  style
+XF  record. In style XF records, these flags specify whether the attributes
+will  overwrite  explicit  cell  formatting  when  the  style is applied to
+a  cell. Changing a cell style (without applying this style to a cell) will
+change  all  cells which already use that style and do not contain explicit
+cell  attributes for the changed style attributes. If a cell XF record does
+not  contain  explicit  attributes  in a group (if the attribute group flag
+is not set), it repeats the attributes of its style XF record.
+
+'''
+
+__rev_id__ = """$Id: Formatting.py,v 1.4 2005/07/20 07:24:11 rvk Exp $"""
+
+
+import BIFFRecords
+
+class Font(object):
+    ESCAPEMENT_NONE         = 0x00
+    ESCAPEMENT_SUPERSCRIPT  = 0x01
+    ESCAPEMENT_SUBSCRIPT    = 0x02
+    
+    UNDERLINE_NONE          = 0x00
+    UNDERLINE_SINGLE        = 0x01
+    UNDERLINE_SINGLE_ACC    = 0x21
+    UNDERLINE_DOUBLE        = 0x02
+    UNDERLINE_DOUBLE_ACC    = 0x22
+    
+    FAMILY_NONE         = 0x00
+    FAMILY_ROMAN        = 0x01
+    FAMILY_SWISS        = 0x02
+    FAMILY_MODERN       = 0x03
+    FAMILY_SCRIPT       = 0x04
+    FAMILY_DECORARTIVE  = 0x05
+    
+    CHARSET_ANSI_LATIN          = 0x00
+    CHARSET_SYS_DEFAULT         = 0x01
+    CHARSET_SYMBOL              = 0x02
+    CHARSET_APPLE_ROMAN         = 0x4D
+    CHARSET_ANSI_JAP_SHIFT_JIS  = 0x80
+    CHARSET_ANSI_KOR_HANGUL     = 0x81
+    CHARSET_ANSI_KOR_JOHAB      = 0x82
+    CHARSET_ANSI_CHINESE_GBK    = 0x86
+    CHARSET_ANSI_CHINESE_BIG5   = 0x88
+    CHARSET_ANSI_GREEK          = 0xA1
+    CHARSET_ANSI_TURKISH        = 0xA2
+    CHARSET_ANSI_VIETNAMESE     = 0xA3
+    CHARSET_ANSI_HEBREW         = 0xB1
+    CHARSET_ANSI_ARABIC         = 0xB2
+    CHARSET_ANSI_BALTIC         = 0xBA
+    CHARSET_ANSI_CYRILLIC       = 0xCC
+    CHARSET_ANSI_THAI           = 0xDE
+    CHARSET_ANSI_LATIN_II       = 0xEE
+    CHARSET_OEM_LATIN_I         = 0xFF   
+    
+    def __init__(self):
+        # twip = 1/20 of a point = 1/1440 of a inch
+        # usually resolution == 96 pixels per 1 inch 
+        # (rarely 120 pixels per 1 inch or another one)
+        
+        self.height = 0x00C8 # 200: this is font with height 10 points
+        self.italic = False
+        self.struck_out = False
+        self.outline = False
+        self.shadow = False
+        self.colour_index = 0x7FFF
+        self.bold = False
+        self._weight = 0x0190 # 0x02BC gives bold font
+        self.escapement = self.ESCAPEMENT_NONE
+        self.underline = self.UNDERLINE_NONE
+        self.family = self.FAMILY_NONE
+        self.charset = self.CHARSET_ANSI_CYRILLIC       
+        self.name = 'Arial'
+                
+    def get_biff_record(self):
+        height = self.height
+        
+        options = 0x00
+        if self.bold:
+            options |= 0x01
+            self._weight = 0x02BC
+        if self.italic:
+            options |= 0x02
+        if self.underline != self.UNDERLINE_NONE:
+            options |= 0x04
+        if self.struck_out:
+            options |= 0x08
+        if self.outline:
+            options |= 0x010
+        if self.shadow:
+            options |= 0x020
+            
+        colour_index = self.colour_index 
+        weight = self._weight
+        escapement = self.escapement
+        underline = self.underline 
+        family = self.family 
+        charset = self.charset
+        name = self.name
+        
+        return BIFFRecords.FontRecord(height, options, colour_index, weight, escapement, 
+                    underline, family, charset, 
+                    name)
+
+class Alignment(object):
+    HORZ_GENERAL                = 0x00
+    HORZ_LEFT                   = 0x01
+    HORZ_CENTER                 = 0x02
+    HORZ_RIGHT                  = 0x03
+    HORZ_FILLED                 = 0x04
+    HORZ_JUSTIFIED              = 0x05 # BIFF4-BIFF8X
+    HORZ_CENTER_ACROSS_SEL      = 0x06 # Centred across selection (BIFF4-BIFF8X)
+    HORZ_DISTRIBUTED            = 0x07 # Distributed (BIFF8X)
+    
+    VERT_TOP                    = 0x00 
+    VERT_CENTER                 = 0x01
+    VERT_BOTTOM                 = 0x02
+    VERT_JUSTIFIED              = 0x03 # Justified (BIFF5-BIFF8X)
+    VERT_DISIRIBUTED            = 0x04 # Distributed (BIFF8X)
+
+    DIRECTION_GENERAL           = 0x00 # BIFF8X
+    DIRECTION_LR                = 0x01
+    DIRECTION_RL                = 0x02
+
+    ORIENTATION_NOT_ROTATED     = 0x00
+    ORIENTATION_STACKED         = 0x01
+    ORIENTATION_90_CC           = 0x02
+    ORIENTATION_90_CW           = 0x03
+
+    ROTATION_0_ANGLE            = 0x00
+    ROTATION_STACKED            = 0xFF
+    
+    WRAP_AT_RIGHT               = 0x01
+    NOT_WRAP_AT_RIGHT           = 0x00
+    
+    SHRINK_TO_FIT               = 0x01
+    NOT_SHRINK_TO_FIT           = 0x00       
+
+    def __init__(self):
+        self.horz = self.HORZ_GENERAL
+        self.vert = self.VERT_BOTTOM
+        self.dire = self.DIRECTION_GENERAL
+        self.orie = self.ORIENTATION_NOT_ROTATED
+        self.rota = self.ROTATION_0_ANGLE
+        self.wrap = self.NOT_WRAP_AT_RIGHT
+        self.shri = self.NOT_SHRINK_TO_FIT
+        self.inde = 0
+        self.merg = 0
+
+class Borders(object):
+    NO_LINE = 0x00
+    THIN    = 0x01
+    MEDIUM  = 0x02
+    DASHED  = 0x03
+    DOTTED  = 0x04
+    THICK   = 0x05
+    DOUBLE  = 0x06
+    HAIR    = 0x07
+    #The following for BIFF8
+    MEDIUM_DASHED               = 0x08
+    THIN_DASH_DOTTED            = 0x09
+    MEDIUM_DASH_DOTTED          = 0x0A
+    THIN_DASH_DOT_DOTTED        = 0x0B
+    MEDIUM_DASH_DOT_DOTTED      = 0x0C
+    SLANTED_MEDIUM_DASH_DOTTED  = 0x0D
+    
+    NEED_DIAG1      = 0x01
+    NEED_DIAG2      = 0x01
+    NO_NEED_DIAG1   = 0x00
+    NO_NEED_DIAG2   = 0x00
+
+    def __init__(self):
+        self.left   = self.NO_LINE
+        self.right  = self.NO_LINE
+        self.top    = self.NO_LINE
+        self.bottom = self.NO_LINE
+        self.diag   = self.NO_LINE
+
+        self.left_colour   = 0x40
+        self.right_colour  = 0x40
+        self.top_colour    = 0x40
+        self.bottom_colour = 0x40
+        self.diag_colour   = 0x40
+        
+        self.need_diag1 = self.NO_NEED_DIAG1
+        self.need_diag2 = self.NO_NEED_DIAG2
+
+class Pattern(object):
+    # patterns 0x00 - 0x12
+    NO_PATTERN      = 0x00 
+    SOLID_PATTERN   = 0x01 
+    
+    def __init__(self):
+        self.pattern = self.NO_PATTERN
+        self.pattern_fore_colour = 0x40
+        self.pattern_back_colour = 0x41
+        
+class Protection(object):
+    def __init__(self):
+        self.cell_locked = 1
+        self.formula_hidden = 0
+        
+        
+if __name__ == '__main__':
+    font0 = Font()
+    font0.name = 'Arial'
+    font1 = Font()
+    font1.name = 'Arial Cyr'
+    font2 = Font()
+    font2.name = 'Times New Roman'
+    font3 = Font()
+    font3.name = 'Courier New Cyr'
+    
+    for font, filename in [(font0, 'font0.bin'), (font1, 'font1.bin'), (font2, 'font2.bin'), (font3, 'font3.bin')]:
+        f = file(filename, 'wb')
+        f.write(font.get_biff_record().get_data())
+        f.close
+        

config/softs/pyExcelerator-0.6.3a.patched/pyExcelerator/ImportXLS.py

@@ -0,0 +1,476 @@
+#!/usr/bin/env python
+# -*- coding: windows-1251 -*-
+
+#  Copyright (C) 2005 Roman V. Kiseliov
+#  All rights reserved.
+# 
+#  Redistribution and use in source and binary forms, with or without
+#  modification, are permitted provided that the following conditions
+#  are met:
+# 
+#  1. Redistributions of source code must retain the above copyright
+#     notice, this list of conditions and the following disclaimer.
+# 
+#  2. Redistributions in binary form must reproduce the above copyright
+#     notice, this list of conditions and the following disclaimer in
+#     the documentation and/or other materials provided with the
+#     distribution.
+# 
+#  3. All advertising materials mentioning features or use of this
+#     software must display the following acknowledgment:
+#     "This product includes software developed by
+#      Roman V. Kiseliov <roman@kiseliov.ru>."
+# 
+#  4. Redistributions of any form whatsoever must retain the following
+#     acknowledgment:
+#     "This product includes software developed by
+#      Roman V. Kiseliov <roman@kiseliov.ru>."
+# 
+#  THIS SOFTWARE IS PROVIDED BY Roman V. Kiseliov ``AS IS'' AND ANY
+#  EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+#  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+#  PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL Roman V. Kiseliov OR
+#  ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+#  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+#  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+#  HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+#  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+#  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+#  OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+__rev_id__ = """$Id: ImportXLS.py,v 1.6 2005/10/26 07:44:24 rvk Exp $"""
+
+
+import UnicodeUtils
+import CompoundDoc
+import ExcelMagic
+from struct import pack, unpack
+
+
+def parse_xls(filename, encoding = None, doc=None): # XXX added doc arg.
+    
+    ##########################################################################
+
+    def process_BOUNDSHEET(biff8, rec_data):
+        sheet_stream_pos, visibility, sheet_type = unpack('<I2B', rec_data[:6])
+        sheet_name = rec_data[6:]
+
+        if biff8:
+            chars_num, options = unpack('2B', sheet_name[:2])
+            
+            chars_start = 2
+            runs_num = 0
+            asian_phonetic_size = 0
+
+            result = ''
+
+            compressed = (options & 0x01) == 0
+            has_asian_phonetic = (options & 0x04) != 0
+            has_format_runs = (options & 0x08) != 0
+
+            if has_format_runs:
+                runs_num , = unpack('<H', sheet_name[chars_start:chars_start+2])
+                chars_start += 2
+            if has_asian_phonetic:
+                asian_phonetic_size , = unpack('<I', sheet_name[chars_start:chars_start+4])
+                chars_start += 4
+
+            if compressed:
+                chars_end = chars_start + chars_num
+                result = sheet_name[chars_start:chars_end].decode('latin_1', 'replace')
+            else:
+                chars_end = chars_start + 2*chars_num
+                result = sheet_name[chars_start:chars_end].decode('utf_16_le', 'replace')
+            
+            tail_size = 4*runs_num + asian_phonetic_size
+        else:
+            result = sheet_name[1:].decode(encoding, 'replace')
+        
+        return result
+
+
+    def unpack2str(biff8, label_name): # 2 bytes length str
+        if biff8:
+            chars_num, options = unpack('<HB', label_name[:3])
+            
+            chars_start = 3
+            runs_num = 0
+            asian_phonetic_size = 0
+
+            result = ''
+
+            compressed = (options & 0x01) == 0
+            has_asian_phonetic = (options & 0x04) != 0
+            has_format_runs = (options & 0x08) != 0
+
+            if has_format_runs:
+                runs_num , = unpack('<H', label_name[chars_start:chars_start+2])
+                chars_start += 2
+            if has_asian_phonetic:
+                asian_phonetic_size , = unpack('<I', label_name[chars_start:chars_start+4])
+                chars_start += 4
+
+            if compressed:
+                chars_end = chars_start + chars_num
+                result = label_name[chars_start:chars_end].decode('latin_1', 'replace')
+            else:
+                chars_end = chars_start + 2*chars_num
+                result = label_name[chars_start:chars_end].decode('utf_16_le', 'replace')
+            
+            tail_size = 4*runs_num + asian_phonetic_size
+        else:
+            result = label_name[2:].decode(encoding, 'replace')
+
+        return result
+
+
+    def process_LABEL(biff8, rec_data):
+        row_idx, col_idx, xf_idx = unpack('<3H', rec_data[:6])
+        label_name = rec_data[6:]
+        result = unpack2str(biff8, label_name)
+        return (row_idx, col_idx, result)
+
+
+    def process_LABELSST(rec_data):
+        row_idx, col_idx, xf_idx, sst_idx = unpack('<3HI', rec_data)
+        return (row_idx, col_idx, sst_idx)
+
+
+    def process_RSTRING(biff8, rec_data):
+        if biff8:
+            return process_LABEL(biff8, rec_data)
+        else:
+            row_idx, col_idx, xf_idx, length = unpack('<4H', rec_data[:8])
+            result = rec_data[8:8+length].decode(encoding, 'replace')
+
+        return (row_idx, col_idx, result)
+        
+
+    def decode_rk(encoded):
+        b0, b1, b2, b3 = unpack('4B', encoded)
+        is_multed_100 = (b0 & 0x01) != 0
+        is_integer = (b0 & 0x02) != 0
+
+        if is_integer:
+            result , = unpack('<i', encoded)
+            result >>= 2
+        else:
+            ieee754 = struct.pack('8B', 0, 0, 0, 0, b0 & 0xFC, b1, b2, b3)
+            result , = unpack('<d', ieee754)
+        if is_multed_100:
+            result /= 100.0
+        
+        return result
+
+
+    def process_RK(rec_data):
+        row_idx, col_idx, xf_idx, encoded = unpack('<3H4s', rec_data)
+        result = decode_rk(encoded)
+        return (row_idx, col_idx, result)
+
+
+    def process_MULRK(rec_data):
+        row_idx, first_col_idx = unpack('<2H', rec_data[:4])
+        last_col_idx , = unpack('<H', rec_data[-2:])
+        xf_rk_num = last_col_idx - first_col_idx + 1
+
+        results = []
+        for i in range(xf_rk_num):
+            xf_idx, encoded = unpack('<H4s', rec_data[4+6*i : 4+6*(i+1)])
+            results.append(decode_rk(encoded))
+
+        return zip([row_idx]*xf_rk_num, range(first_col_idx, last_col_idx+1), results)
+
+
+    def process_NUMBER(rec_data):
+        row_idx, col_idx, xf_idx, result = unpack('<3Hd', rec_data)
+        return (row_idx, col_idx, result)
+
+    
+    def process_SST(rec_data, sst_continues):
+        # 0x00FC
+        total_refs, total_str = unpack('<2I', rec_data[:8])
+        #print total_refs, str_num
+
+        pos = 8
+        curr_block = rec_data
+        curr_block_num = -1
+        curr_str_num = 0
+        SST = {}
+
+        while curr_str_num < total_str:
+            if pos >= len(curr_block):
+                curr_block_num += 1
+                curr_block = sst_continues[curr_block_num]
+                pos = 0
+
+            chars_num, options = unpack('<HB', curr_block[pos:pos+3])
+            #print chars_num, options
+            pos += 3
+
+            asian_phonetic_size = 0
+            runs_num = 0
+            has_asian_phonetic = (options & 0x04) != 0
+            has_format_runs = (options & 0x08) != 0
+            if has_format_runs:
+                runs_num , = unpack('<H', curr_block[pos:pos+2])
+                pos += 2
+            if has_asian_phonetic:
+                asian_phonetic_size , = unpack('<I', curr_block[pos:pos+4])
+                pos += 4
+
+            curr_char = 0
+            result = ''
+            while curr_char < chars_num:
+                if pos >= len(curr_block):
+                    curr_block_num += 1
+                    curr_block = sst_continues[curr_block_num]
+                    options = ord(curr_block[0])
+                    pos = 1
+                #print curr_block_num
+
+                compressed = (options & 0x01) == 0
+                if compressed:
+                    chars_end = pos + chars_num - curr_char
+                else:
+                    chars_end = pos + 2*(chars_num - curr_char)
+                #print compressed, has_asian_phonetic, has_format_runs
+
+                splitted = chars_end > len(curr_block)
+                if splitted:
+                    chars_end = len(curr_block)
+                #print splitted, curr_char, pos, chars_end, repr(curr_block[pos:chars_end])
+
+                if compressed:
+                    result += curr_block[pos:chars_end].decode('latin_1', 'replace')
+                else:
+                    result += curr_block[pos:chars_end].decode('utf_16_le', 'replace')
+
+                pos = chars_end
+                curr_char = len(result)
+            # end while
+
+            # TODO: handle spanning format runs over CONTINUE blocks ???
+            tail_size = 4*runs_num + asian_phonetic_size
+            if len(curr_block) < pos + tail_size:
+                pos = pos + tail_size - len(curr_block)
+                curr_block_num += 1
+                curr_block = sst_continues[curr_block_num]
+            else:
+                pos += tail_size
+
+            #print result.encode('cp866')
+
+            SST[curr_str_num] = result
+            curr_str_num += 1
+
+        return SST
+
+
+    #####################################################################################
+    
+    import struct
+
+    encodings = {
+        0x016F: 'ascii',     #ASCII
+        0x01B5: 'cp437',     #IBM PC CP-437 (US)
+        0x02D0: 'cp720',     #IBM PC CP-720 (OEM Arabic)
+        0x02E1: 'cp737',     #IBM PC CP-737 (Greek)
+        0x0307: 'cp775',     #IBM PC CP-775 (Baltic)
+        0x0352: 'cp850',     #IBM PC CP-850 (Latin I)
+        0x0354: 'cp852',     #IBM PC CP-852 (Latin II (Central European))
+        0x0357: 'cp855',     #IBM PC CP-855 (Cyrillic)
+        0x0359: 'cp857',     #IBM PC CP-857 (Turkish)
+        0x035A: 'cp858',     #IBM PC CP-858 (Multilingual Latin I with Euro)
+        0x035C: 'cp860',     #IBM PC CP-860 (Portuguese)
+        0x035D: 'cp861',     #IBM PC CP-861 (Icelandic)
+        0x035E: 'cp862',     #IBM PC CP-862 (Hebrew)
+        0x035F: 'cp863',     #IBM PC CP-863 (Canadian (French))
+        0x0360: 'cp864',     #IBM PC CP-864 (Arabic)
+        0x0361: 'cp865',     #IBM PC CP-865 (Nordic)
+        0x0362: 'cp866',     #IBM PC CP-866 (Cyrillic (Russian))
+        0x0365: 'cp869',     #IBM PC CP-869 (Greek (Modern))
+        0x036A: 'cp874',     #Windows CP-874 (Thai)
+        0x03A4: 'cp932',     #Windows CP-932 (Japanese Shift-JIS)
+        0x03A8: 'cp936',     #Windows CP-936 (Chinese Simplified GBK)
+        0x03B5: 'cp949',     #Windows CP-949 (Korean (Wansung))
+        0x03B6: 'cp950',     #Windows CP-950 (Chinese Traditional BIG5)
+        0x04B0: 'utf_16_le', #UTF-16 (BIFF8)
+        0x04E2: 'cp1250',    #Windows CP-1250 (Latin II) (Central European)
+        0x04E3: 'cp1251',    #Windows CP-1251 (Cyrillic)
+        0x04E4: 'cp1252',    #Windows CP-1252 (Latin I) (BIFF4-BIFF7)
+        0x04E5: 'cp1253',    #Windows CP-1253 (Greek)
+        0x04E6: 'cp1254',    #Windows CP-1254 (Turkish)
+        0x04E7: 'cp1255',    #Windows CP-1255 (Hebrew)
+        0x04E8: 'cp1256',    #Windows CP-1256 (Arabic)
+        0x04E9: 'cp1257',    #Windows CP-1257 (Baltic)
+        0x04EA: 'cp1258',    #Windows CP-1258 (Vietnamese)
+        0x0551: 'cp1361',    #Windows CP-1361 (Korean (Johab))
+        0x2710: 'mac_roman', #Apple Roman
+        0x8000: 'mac_roman', #Apple Roman
+        0x8001: 'cp1252'     #Windows CP-1252 (Latin I) (BIFF2-BIFF3)
+    }
+
+    biff8 = True
+    SST = {}
+    sheets = []
+    sheet_names = []
+    values = {}
+    ws_num = 0
+    BOFs = 0
+    EOFs = 0
+
+    # Inside MS Office document looks like filesystem
+    # We need extract stream named 'Workbook' or 'Book'
+    ole_streams = CompoundDoc.Reader(filename, doc=doc).STREAMS
+
+    if 'Workbook' in ole_streams:
+        workbook_stream = ole_streams['Workbook']
+    elif 'Book' in ole_streams:
+        workbook_stream = ole_streams['Book']
+    else:
+        raise Exception, 'No workbook stream in file.'
+
+    workbook_stream_len = len(workbook_stream)
+    stream_pos = 0
+    
+    # Excel's method of data storing is based on 
+    # ancient technology "TLV" (Type, Length, Value).
+    # In addition, if record size grows to some limit
+    # Excel writes CONTINUE records
+    while stream_pos < workbook_stream_len and EOFs <= ws_num:
+        rec_id, data_size = unpack('<2H', workbook_stream[stream_pos:stream_pos+4])
+        stream_pos += 4
+        
+        rec_data = workbook_stream[stream_pos:stream_pos+data_size]
+        stream_pos += data_size
+
+        if rec_id == 0x0809: # BOF
+            #print 'BOF', 
+            BOFs += 1
+            ver, substream_type = unpack('<2H', rec_data[:4])
+            if substream_type == 0x0005:
+                # workbook global substream
+                biff8 = ver >= 0x0600
+            elif substream_type == 0x0010:
+                # worksheet substream
+                pass
+            else: # skip chart stream or unknown stream
+            # stream offsets may be used from BOUNDSHEET record
+                rec_id, data_size = unpack('<2H', workbook_stream[stream_pos:stream_pos+4])
+                while rec_id != 0x000A: # EOF
+                    #print 'SST CONTINUE'
+                    stream_pos += 4
+                    stream_pos += data_size
+                    rec_id, data_size = unpack('<2H', workbook_stream[stream_pos:stream_pos+4])
+            #print 'BIFF8 == ', biff8
+        elif rec_id == 0x000A: # EOF
+            #print 'EOF'
+            if BOFs > 1:
+                sheets.extend([values])
+                values = {}
+            EOFs += 1
+        elif rec_id == 0x0042: # CODEPAGE
+            cp ,  = unpack('<H', rec_data)
+            #print 'CODEPAGE', hex(cp)
+            if not encoding:
+                encoding = encodings[cp]
+            #print encoding
+        elif rec_id == 0x0085: # BOUNDSHEET
+            #print 'BOUNDSHEET',
+            ws_num += 1
+            b = process_BOUNDSHEET(biff8, rec_data)
+            sheet_names.extend([b])
+            #print b.encode('cp866')
+        elif rec_id == 0x00FC: # SST
+            #print 'SST'
+            sst_data = rec_data
+            sst_continues = []
+            rec_id, data_size = unpack('<2H', workbook_stream[stream_pos:stream_pos+4])
+            while rec_id == 0x003C: # CONTINUE
+                #print 'SST CONTINUE'
+                stream_pos += 4
+                rec_data = workbook_stream[stream_pos:stream_pos+data_size]
+                sst_continues.extend([rec_data])
+                stream_pos += data_size
+                rec_id, data_size = unpack('<2H', workbook_stream[stream_pos:stream_pos+4])
+            SST = process_SST(sst_data, sst_continues)
+        elif rec_id == 0x00FD: # LABELSST
+            #print 'LABELSST',
+            r, c, i = process_LABELSST(rec_data)
+            values[(r, c)] = SST[i]
+            #print r, c, SST[i].encode('cp866')
+        elif rec_id == 0x0204: # LABEL
+            #print 'LABEL',
+            r, c, b = process_LABEL(biff8, rec_data)
+            values[(r, c)] = b
+            #print r, c, b.encode('cp866')
+        elif rec_id == 0x00D6: # RSTRING
+            #print 'RSTRING',
+            r, c, b = process_RSTRING(biff8, rec_data)
+            values[(r, c)] = b
+            #print r, c, b.encode('cp866')
+        elif rec_id == 0x027E: # RK
+            #print 'RK',
+            r, c, b = process_RK(rec_data)
+            values[(r, c)] = b
+            #print r, c, b
+        elif rec_id == 0x00BD: # MULRK
+            #print 'MULRK',
+            for r, c, b in process_MULRK(rec_data):
+                values[(r, c)] = b
+            #print r, c, b
+        elif rec_id == 0x0203: # NUMBER
+            #print 'NUMBER',
+            r, c, b = process_NUMBER(rec_data)
+            values[(r, c)] = b
+            #print r, c, b
+        elif rec_id == 0x0006: # FORMULA
+            #print 'FORMULA',
+            r, c, x = unpack('<3H', rec_data[0:6])
+            if rec_data[12] == '\xFF' and rec_data[13] == '\xFF':
+                if rec_data[6] == '\x00':
+                    got_str = False
+                    if ord(rec_data[14]) & 8:
+                        # part of shared formula
+                        rec_id, data_size = unpack('<2H', workbook_stream[stream_pos:stream_pos+4])
+                        stream_pos += 4                      
+                        rec_data = workbook_stream[stream_pos:stream_pos+data_size]
+                        stream_pos += data_size
+                        if rec_id == 0x0207: # STRING
+                            got_str = True
+                        elif rec_id not in (0x0221, 0x04BC, 0x0236, 0x0037, 0x0036):
+                            raise Exception("Expected ARRAY, SHRFMLA, TABLEOP* or STRING record")
+                    if not got_str:
+                        rec_id, data_size = unpack('<2H', workbook_stream[stream_pos:stream_pos+4])
+                        stream_pos += 4                      
+                        rec_data = workbook_stream[stream_pos:stream_pos+data_size]
+                        stream_pos += data_size
+                        if rec_id != 0x0207: # STRING
+                            raise Exception("Expected STRING record")
+                    values[(r, c)] = unpack2str(biff8, rec_data)
+                elif rec_data[6] == '\x01':
+                    # boolean 
+                    v = ord(rec_data[8])
+                    values[(r, c)] = bool(v)
+                elif rec_data[6] == '\x02':
+                    # error
+                    v = ord(rec_data[8])
+                    if v in ExcelMagic.error_msg_by_code:
+                        values[(r, c)] = ExcelMagic.error_msg_by_code[v]
+                    else:
+                        values[(r, c)] = u'#UNKNOWN ERROR!'
+                elif rec_data[6] == '\x03':
+                    # empty
+                    values[(r, c)] = u''
+                else:
+                    raise Exception("Unknown value for formula result")
+            else:
+                # 64-bit float
+                d, = unpack("<d", rec_data[6:14])
+                values[(r, c)] = d
+
+    encoding = None
+    return zip(sheet_names, sheets)

config/softs/pyExcelerator-0.6.3a.patched/pyExcelerator/Row.py

@@ -0,0 +1,231 @@
+#!/usr/bin/env python
+# -*- coding: windows-1251 -*-
+
+#  Copyright (C) 2005 Roman V. Kiseliov
+#  All rights reserved.
+# 
+#  Redistribution and use in source and binary forms, with or without
+#  modification, are permitted provided that the following conditions
+#  are met:
+# 
+#  1. Redistributions of source code must retain the above copyright
+#     notice, this list of conditions and the following disclaimer.
+# 
+#  2. Redistributions in binary form must reproduce the above copyright
+#     notice, this list of conditions and the following disclaimer in
+#     the documentation and/or other materials provided with the
+#     distribution.
+# 
+#  3. All advertising materials mentioning features or use of this
+#     software must display the following acknowledgment:
+#     "This product includes software developed by
+#      Roman V. Kiseliov <roman@kiseliov.ru>."
+# 
+#  4. Redistributions of any form whatsoever must retain the following
+#     acknowledgment:
+#     "This product includes software developed by
+#      Roman V. Kiseliov <roman@kiseliov.ru>."
+# 
+#  THIS SOFTWARE IS PROVIDED BY Roman V. Kiseliov ``AS IS'' AND ANY
+#  EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+#  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+#  PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL Roman V. Kiseliov OR
+#  ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+#  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+#  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+#  HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+#  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+#  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+#  OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+__rev_id__ = """$Id: Row.py,v 1.6 2005/08/11 08:53:48 rvk Exp $"""
+
+
+import BIFFRecords
+from Deco import *
+from Worksheet import Worksheet
+import Style
+import Cell
+import ExcelFormula
+import datetime as dt
+
+
+class Row(object):
+    __slots__ = ["__init__", 
+                 "__adjust_height",
+                 "__adjust_bound_col_idx",
+                 "__excel_date_dt",
+                 "get_height_in_pixels",
+                 "set_style",
+                 "get_xf_index",
+                 "get_cells_count",
+                 "get_min_col",
+                 "get_max_col",
+                 "get_str_count",
+                 "get_row_biff_data",
+                 "get_cells_biff_data",
+                 "get_index",
+                 "write",
+                 "write_blanks",
+                 # private variables
+                 "__idx",
+                 "__parent",
+                 "__parent_wb",
+                 "__cells",
+                 "__min_col_idx",
+                 "__max_col_idx",
+                 "__total_str",
+                 "__xf_index",
+                 "__has_default_format",
+                 "__height_in_pixels",
+                 # public variables
+                 "height",
+                 "has_default_height",
+                 "level",
+                 "collapse",
+                 "hidden",
+                 "space_above",
+                 "space_below"]
+
+    #################################################################
+    ## Constructor
+    #################################################################
+    def __init__(self, index, parent_sheet):
+        self.__idx = index
+        self.__parent = parent_sheet
+        self.__parent_wb = parent_sheet.get_parent()
+        self.__cells = []
+        self.__min_col_idx = 0
+        self.__max_col_idx = 0
+        self.__total_str = 0
+        self.__xf_index = 0x0F
+        self.__has_default_format = 0
+        self.__height_in_pixels = 0x11
+        
+        self.height = 0x00FF
+        self.has_default_height = 0x00
+        self.level = 0
+        self.collapse = 0
+        self.hidden = 0
+        self.space_above = 0
+        self.space_below = 0
+
+
+    def __adjust_height(self, style):
+        twips = style.font.height
+        points = float(twips)/20.0
+        # Cell height in pixels can be calcuted by following approx. formula:
+        # cell height in pixels = font height in points * 83/50 + 2/5
+        # It works when screen resolution is 96 dpi 
+        pix = int(round(points*83.0/50.0 + 2.0/5.0))
+        if pix > self.__height_in_pixels:
+            self.__height_in_pixels = pix
+
+
+    def __adjust_bound_col_idx(self, *args):
+        for arg in args:
+            if arg < self.__min_col_idx:
+                self.__min_col_idx = arg
+            elif arg > self.__max_col_idx:
+                self.__max_col_idx = arg
+
+    def __excel_date_dt(self, date):
+        if isinstance(date, dt.date) and (not isinstance(date, dt.datetime)):
+            epoch = dt.date(1899, 12, 31)
+        elif isinstance(date, dt.time):
+            date = dt.datetime.combine(dt.datetime(1900, 1, 1), date)
+            epoch = dt.datetime(1900, 1, 1, 0, 0, 0)
+        else:
+            epoch = dt.datetime(1899, 12, 31, 0, 0, 0)
+        delta = date - epoch
+        xldate = delta.days + float(delta.seconds) / (24*60*60)
+        # Add a day for Excel's missing leap day in 1900
+        if xldate > 59:
+            xldate += 1
+        return xldate
+
+    def get_height_in_pixels(self):
+        return self.__height_in_pixels
+
+
+    #accepts(object, Style.XFStyle)
+    def set_style(self, style):
+        self.__adjust_height(style)
+        self.__xf_index = self.__parent_wb.add_style(style)
+
+            
+    def get_xf_index(self):
+        return self.__xf_index
+
+    
+    def get_cells_count(self):
+        return len(self.__cells)
+
+    
+    def get_min_col(self):
+        return self.__min_col_idx
+
+        
+    def get_max_col(self):
+        return self.__min_col_idx
+
+        
+    def get_str_count(self):
+        return self.__total_str
+
+
+    def get_row_biff_data(self):
+        height_options = (self.height & 0x07FFF) 
+        height_options |= (self.has_default_height & 0x01) << 15
+
+        options =  (self.level & 0x07) << 0
+        options |= (self.collapse & 0x01) << 4
+        options |= (self.hidden & 0x01) << 5
+        options |= (0x00 & 0x01) << 6
+        options |= (0x01 & 0x01) << 8
+        if self.__xf_index != 0x0F:
+            options |= (0x01 & 0x01) << 7
+        else:
+            options |= (0x00 & 0x01) << 7
+        options |= (self.__xf_index & 0x0FFF) << 16 
+        options |= (0x00 & self.space_above) << 28
+        options |= (0x00 & self.space_below) << 29
+        
+        return BIFFRecords.RowRecord(self.__idx, self.__min_col_idx, self.__max_col_idx, height_options, options).get()                                              
+                        
+
+    def get_cells_biff_data(self):
+        return ''.join([ cell.get_biff_data() for cell in self.__cells ])
+
+
+    def get_index(self):
+        return self.__idx
+
+
+    #accepts(object, int, (str, unicode, int, float, dt.datetime, dt.time, dt.date, ExcelFormula.Formula), Style.XFStyle)
+    def write(self, col, label, style):
+        self.__adjust_height(style)
+        self.__adjust_bound_col_idx(col)
+        if isinstance(label, (str, unicode)):
+            if len(label) > 0:
+                self.__cells.extend([ Cell.StrCell(self, col, self.__parent_wb.add_style(style), self.__parent_wb.add_str(label)) ])
+                self.__total_str += 1
+            else:
+                self.__cells.extend([ Cell.BlankCell(self, col, self.__parent_wb.add_style(style)) ])
+        elif isinstance(label, (int, float)):
+            self.__cells.extend([ Cell.NumberCell(self, col, self.__parent_wb.add_style(style), label) ])            
+        elif isinstance(label, (dt.datetime, dt.time)):
+            self.__cells.extend([ Cell.NumberCell(self, col, self.__parent_wb.add_style(style), self.__excel_date_dt(label)) ])
+        else:
+            self.__cells.extend([ Cell.FormulaCell(self, col, self.__parent_wb.add_style(style), label) ])
+
+    #accepts(object, int, int, Style.XFStyle)                        
+    def write_blanks(self, c1, c2, style):
+        self.__adjust_height(style)
+        self.__adjust_bound_col_idx(c1, c2)
+        self.__cells.extend([ Cell.MulBlankCell(self, c1, c2, self.__parent_wb.add_style(style)) ])
+
+        
+        

config/softs/pyExcelerator-0.6.3a.patched/pyExcelerator/Style.py

@@ -0,0 +1,197 @@
+#!/usr/bin/env python
+# -*- coding: windows-1251 -*-
+
+#  Copyright (C) 2005 Roman V. Kiseliov
+#  All rights reserved.
+# 
+#  Redistribution and use in source and binary forms, with or without
+#  modification, are permitted provided that the following conditions
+#  are met:
+# 
+#  1. Redistributions of source code must retain the above copyright
+#     notice, this list of conditions and the following disclaimer.
+# 
+#  2. Redistributions in binary form must reproduce the above copyright
+#     notice, this list of conditions and the following disclaimer in
+#     the documentation and/or other materials provided with the
+#     distribution.
+# 
+#  3. All advertising materials mentioning features or use of this
+#     software must display the following acknowledgment:
+#     "This product includes software developed by
+#      Roman V. Kiseliov <roman@kiseliov.ru>."
+# 
+#  4. Redistributions of any form whatsoever must retain the following
+#     acknowledgment:
+#     "This product includes software developed by
+#      Roman V. Kiseliov <roman@kiseliov.ru>."
+# 
+#  THIS SOFTWARE IS PROVIDED BY Roman V. Kiseliov ``AS IS'' AND ANY
+#  EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+#  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+#  PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL Roman V. Kiseliov OR
+#  ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+#  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+#  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+#  HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+#  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+#  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+#  OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+__rev_id__ = """$Id: Style.py,v 1.4 2005/07/20 07:24:11 rvk Exp $"""
+
+
+import Formatting
+from BIFFRecords import *
+
+
+_default_num_format = 'general'
+_default_font = Formatting.Font()
+_default_alignment = Formatting.Alignment()
+_default_borders = Formatting.Borders()
+_default_pattern = Formatting.Pattern()
+_default_protection = Formatting.Protection()
+
+class XFStyle(object):
+    
+    def __init__(self):
+        self.num_format_str  = _default_num_format
+        self.font            = _default_font 
+        self.alignment       = _default_alignment
+        self.borders         = _default_borders
+        self.pattern         = _default_pattern 
+        self.protection      = _default_protection
+
+class StyleCollection(object):
+    _std_num_fmt_list = [
+            'general',
+            '0',
+            '0.00',
+            '#,##0',
+            '#,##0.00',
+            '"$"#,##0_);("$"#,##',
+            '"$"#,##0_);[Red]("$"#,##',
+            '"$"#,##0.00_);("$"#,##',
+            '"$"#,##0.00_);[Red]("$"#,##',
+            '0%',
+            '0.00%',
+            '0.00E+00',
+            '# ?/?',
+            '# ??/??',
+            'M/D/YY',
+            'D-MMM-YY',
+            'D-MMM',
+            'MMM-YY',
+            'h:mm AM/PM',
+            'h:mm:ss AM/PM',
+            'h:mm',
+            'h:mm:ss',
+            'M/D/YY h:mm',
+            '_(#,##0_);(#,##0)',
+            '_(#,##0_);[Red](#,##0)',
+            '_(#,##0.00_);(#,##0.00)',
+            '_(#,##0.00_);[Red](#,##0.00)',
+            '_("$"* #,##0_);_("$"* (#,##0);_("$"* "-"_);_(@_)',
+            '_(* #,##0_);_(* (#,##0);_(* "-"_);_(@_)',
+            '_("$"* #,##0.00_);_("$"* (#,##0.00);_("$"* "-"??_);_(@_)',
+            '_(* #,##0.00_);_(* (#,##0.00);_(* "-"??_);_(@_)',
+            'mm:ss',
+            '[h]:mm:ss',
+            'mm:ss.0',
+            '##0.0E+0',
+            '@'   
+    ]
+
+    def __init__(self):
+        self._fonts = {}
+        self._fonts[Formatting.Font()] = 0
+        self._fonts[Formatting.Font()] = 1
+        self._fonts[Formatting.Font()] = 2
+        self._fonts[Formatting.Font()] = 3
+        # The font with index 4 is omitted in all BIFF versions
+        self._fonts[Formatting.Font()] = 5
+        
+        self._num_formats = {}
+        for fmtidx, fmtstr in zip(range(0, 23), StyleCollection._std_num_fmt_list[0:23]):
+            self._num_formats[fmtstr] = fmtidx 
+        for fmtidx, fmtstr in zip(range(37, 50), StyleCollection._std_num_fmt_list[23:]):
+            self._num_formats[fmtstr] = fmtidx 
+
+        self._xf = {}
+        self.default_style = XFStyle()
+        self._default_xf = self._add_style(self.default_style)[0]
+        
+    def add(self, style): 
+        if style == None:
+            return 0x10
+        return self._add_style(style)[1]
+    
+    def _add_style(self, style):
+        num_format_str = style.num_format_str
+        if num_format_str in self._num_formats:
+            num_format_idx = self._num_formats[num_format_str]
+        else:
+            num_format_idx = 163 + len(self._num_formats) - len(StyleCollection._std_num_fmt_list)
+            self._num_formats[num_format_str] = num_format_idx
+            
+        font = style.font
+        if font in self._fonts:
+            font_idx = self._fonts[font]
+        else:
+            font_idx = len(self._fonts) + 1
+            self._fonts[font] = font_idx
+            
+        xf = (font_idx, num_format_idx, style.alignment, style.borders, style.pattern, style.protection)
+        
+        if xf in self._xf:
+            xf_index = self._xf[xf]
+        else:
+            xf_index = 0x10 + len(self._xf)
+            self._xf[xf] = xf_index
+            
+        return xf, xf_index
+        
+    def get_biff_data(self):
+        result = ''
+        result += self._all_fonts()
+        result += self._all_num_formats()
+        result += self._all_cell_styles()
+        result += self._all_styles()
+        return result 
+            
+    def _all_fonts(self):
+        result = ''
+        i = sorted([(v, k) for k, v in self._fonts.items()])
+        for font_idx, font in i:
+            result += font.get_biff_record().get()
+        return result
+    
+    def _all_num_formats(self):
+        result = ''
+        i = sorted([(v, k) for k, v in self._num_formats.items() if v>=163])
+        for fmtidx, fmtstr in i:
+            result += NumberFormatRecord(fmtidx, fmtstr).get()
+        return result
+    
+    def _all_cell_styles(self):        
+        result = ''
+        for i in range(0, 16):
+            result += XFRecord(self._default_xf, 'style').get()
+            
+        i = sorted([(v, k) for k, v in self._xf.items()])                            
+        for xf_idx, xf in i:
+            result += XFRecord(xf).get()
+        return result
+        
+    def _all_styles(self):
+        return StyleRecord().get()
+        
+if __name__ == '__main__':
+    sc = StyleCollection()
+    f = file('styles.bin', 'wb')
+    f.write(sc.get_biff_data())
+    f.close()
+
+            

config/softs/pyExcelerator-0.6.3a.patched/pyExcelerator/UnicodeUtils.py

@@ -0,0 +1,135 @@
+#!/usr/bin/env python
+# -*- coding: windows-1251 -*-
+
+#  Copyright (C) 2005 Roman V. Kiseliov
+#  All rights reserved.
+# 
+#  Redistribution and use in source and binary forms, with or without
+#  modification, are permitted provided that the following conditions
+#  are met:
+# 
+#  1. Redistributions of source code must retain the above copyright
+#     notice, this list of conditions and the following disclaimer.
+# 
+#  2. Redistributions in binary form must reproduce the above copyright
+#     notice, this list of conditions and the following disclaimer in
+#     the documentation and/or other materials provided with the
+#     distribution.
+# 
+#  3. All advertising materials mentioning features or use of this
+#     software must display the following acknowledgment:
+#     "This product includes software developed by
+#      Roman V. Kiseliov <roman@kiseliov.ru>."
+# 
+#  4. Redistributions of any form whatsoever must retain the following
+#     acknowledgment:
+#     "This product includes software developed by
+#      Roman V. Kiseliov <roman@kiseliov.ru>."
+# 
+#  THIS SOFTWARE IS PROVIDED BY Roman V. Kiseliov ``AS IS'' AND ANY
+#  EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+#  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+#  PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL Roman V. Kiseliov OR
+#  ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+#  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+#  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+#  HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+#  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+#  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+#  OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+'''
+From BIFF8 on, strings are always stored using UTF-16LE  text encoding. The
+character  array  is  a  sequence  of  16-bit  values4.  Additionally it is
+possible  to  use  a  compressed  format, which omits the high bytes of all
+characters, if they are all zero.
+
+The following tables describe the standard format of the entire string, but
+in many records the strings differ from this format. This will be mentioned
+separately. It is possible (but not required) to store Rich-Text formatting
+information  and  Asian  phonetic information inside a Unicode string. This
+results  in  four  different  ways  to  store a string. The character array
+is not zero-terminated.
+
+The  string  consists  of  the  character count (as usual an 8-bit value or
+a  16-bit value), option flags, the character array and optional formatting
+information.  If the string is empty, sometimes the option flags field will
+not occur. This is mentioned at the respective place.
+
+Offset  Size    Contents
+0       1 or 2  Length of the string (character count, ln)
+1 or 2  1       Option flags:
+                  Bit   Mask Contents
+                  0     01H  Character compression (ccompr):
+                               0 = Compressed (8-bit characters)
+                               1 = Uncompressed (16-bit characters)
+                  2     04H  Asian phonetic settings (phonetic):
+                               0 = Does not contain Asian phonetic settings
+                               1 = Contains Asian phonetic settings
+                  3     08H  Rich-Text settings (richtext):
+                               0 = Does not contain Rich-Text settings
+                               1 = Contains Rich-Text settings
+[2 or 3] 2      (optional, only if richtext=1) Number of Rich-Text formatting runs (rt)
+[var.]   4      (optional, only if phonetic=1) Size of Asian phonetic settings block (in bytes, sz)
+var.     ln or 
+         2·ln   Character array (8-bit characters or 16-bit characters, dependent on ccompr)
+[var.]   4·rt   (optional, only if richtext=1) List of rt formatting runs 
+[var.]   sz     (optional, only if phonetic=1) Asian Phonetic Settings Block 
+'''
+
+
+__rev_id__ = """$Id: UnicodeUtils.py,v 1.4 2005/07/20 07:24:11 rvk Exp $"""
+
+
+import struct
+
+
+DEFAULT_ENCODING = 'cp1251'
+
+def u2ints(ustr):
+    ints = [ord(uchr) for uchr in ustr]
+    return ints
+
+def u2bytes(ustr):
+    ints = u2ints(ustr)
+    return struct.pack('<' + 'H'*len(ints), *ints)
+
+def upack2(_str):
+    try:
+        ustr = u2bytes(unicode(_str, 'ascii'))
+        return struct.pack('<HB', len(_str), 0) + _str    
+    except:
+        if isinstance(_str, unicode):
+            ustr = u2bytes(_str)
+        else:
+            ustr = u2bytes(unicode(_str, DEFAULT_ENCODING))
+        return struct.pack('<HB', len(_str), 1) + ustr
+
+def upack1(_str):
+    try:
+        ustr = u2bytes(unicode(_str, 'ascii'))
+        return struct.pack('BB', len(_str), 0) + _str    
+    except:
+        if isinstance(_str, unicode):
+            ustr = u2bytes(_str)
+        else:
+            ustr = u2bytes(unicode(_str, DEFAULT_ENCODING))
+        return struct.pack('BB', len(_str), 1) + ustr
+
+if __name__ == '__main__':   
+    f = file('out0.bin', 'wb')
+    f.write(u2bytes('þíèêîä: unicode'))
+    f.close()
+
+    f = file('out1.bin', 'wb')
+    f.write(upack1('þíèêîä: unicode'))
+    f.close()
+
+    f = file('out2.bin', 'wb')
+    f.write(upack2('þíèêîä: unicode'))
+    f.close()
+
+
+

config/softs/pyExcelerator-0.6.3a.patched/pyExcelerator/Utils.py

@@ -0,0 +1,165 @@
+# pyXLWriter: A library for generating Excel Spreadsheets
+# Copyright (c) 2004 Evgeny Filatov <fufff@users.sourceforge.net>
+# Copyright (c) 2002-2004 John McNamara (Perl Spreadsheet::WriteExcel)
+#
+# This library is free software; you can redistribute it and/or modify it
+# under the terms of the GNU Lesser General Public License as published by
+# the Free Software Foundation; either version 2.1 of the License, or
+# (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU Lesser
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with this library; if not, write to the Free Software Foundation,
+# Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+#----------------------------------------------------------------------------
+# This module was written/ported from PERL Spreadsheet::WriteExcel module
+# The author of the PERL Spreadsheet::WriteExcel module is John McNamara
+# <jmcnamara@cpan.org>
+#----------------------------------------------------------------------------
+# See the README.txt distributed with pyXLWriter for more details.
+
+# Portions are (C) Roman V. Kiseliov, 2005
+
+"""pyXLWriter.utilites
+
+Utilities for work with reference to cells
+
+"""
+__rev_id__ = """$Id: Utils.py,v 1.1 2005/08/11 08:53:48 rvk Exp $"""
+
+import re
+from struct import pack
+from ExcelMagic import MAX_ROW, MAX_COL
+
+
+_re_cell_ex = re.compile(r"(\$?)([A-I]?[A-Z])(\$?)(\d+)")
+_re_row_range = re.compile(r"\$?(\d+):\$?(\d+)")
+_re_col_range = re.compile(r"\$?([A-I]?[A-Z]):\$?([A-I]?[A-Z])")
+_re_cell_range = re.compile(r"\$?([A-I]?[A-Z]\$?\d+):\$?([A-I]?[A-Z]\$?\d+)")
+_re_cell_ref = re.compile(r"\$?([A-I]?[A-Z]\$?\d+)")
+
+
+def col_by_name(colname):
+    """
+    """
+    col = 0
+    pow = 1
+    for i in xrange(len(colname)-1, -1, -1):
+        ch = colname[i]
+        col += (ord(ch) - ord('A') + 1) * pow
+        pow *= 26
+    return col - 1
+
+
+def cell_to_rowcol(cell):
+    """Convert an Excel cell reference string in A1 notation
+    to numeric row/col notation.
+  
+    Returns: row, col, row_abs, col_abs
+ 
+    """
+    m = _re_cell_ex.match(cell)
+    if not m:
+        raise Exception("Error in cell format")
+    col_abs, col, row_abs, row = m.groups()
+    row_abs = bool(row_abs)
+    col_abs = bool(col_abs)
+    row = int(row) - 1
+    col = col_by_name(col)
+    return row, col, row_abs, col_abs
+
+
+def cell_to_rowcol2(cell):
+    """Convert an Excel cell reference string in A1 notation
+    to numeric row/col notation.
+  
+    Returns: row, col
+    
+    """
+    m = _re_cell_ex.match(cell)
+    if not m:
+        raise Exception("Error in cell format")
+    col_abs, col, row_abs, row = m.groups()
+    # Convert base26 column string to number
+    # All your Base are belong to us.
+    row = int(row) - 1
+    col = col_by_name(col)
+    return row, col
+    
+    
+def rowcol_to_cell(row, col, row_abs=False, col_abs=False):
+    """Convert numeric row/col notation to an Excel cell reference string in
+    A1 notation.
+ 
+    """
+    d = col // 26
+    m = col % 26
+    chr1 = ""    # Most significant character in AA1
+    if row_abs:
+        row_abs = '$'
+    else:
+        row_abs = ''
+    if col_abs:
+        col_abs = '$'
+    else:
+        col_abs = ''
+    if d > 0:
+        chr1 = chr(ord('A') + d  - 1)
+    chr2 = chr(ord('A') + m)
+    # Zero index to 1-index
+    return col_abs + chr1 + chr2 + row_abs + str(row + 1)
+
+
+def cellrange_to_rowcol_pair(cellrange):
+    """Convert cell range string in A1 notation to numeric row/col 
+    pair.
+
+    Returns: row1, col1, row2, col2
+    
+    """
+    cellrange = cellrange.upper()
+    # Convert a row range: '1:3'
+    res = _re_row_range.match(cellrange)
+    if res:
+        row1 = int(res.group(1)) - 1
+        col1 = 0
+        row2 = int(res.group(2)) - 1
+        col2 = -1
+        return row1, col1, row2, col2
+    # Convert a column range: 'A:A' or 'B:G'.
+    # A range such as A:A is equivalent to A1:A16384, so add rows as required
+    res = _re_col_range.match(cellrange)
+    if res:
+        col1 = col_by_name(res.group(1))
+        row1 = 0
+        col2 = col_by_name(res.group(2))
+        row2 = -1
+        return row1, col1, row2, col2
+    # Convert a cell range: 'A1:B7'
+    res = _re_cell_range.match(cellrange)
+    if res:
+        row1, col1 = cell_to_rowcol2(res.group(1))
+        row2, col2 = cell_to_rowcol2(res.group(2))
+        return row1, col1, row2, col2
+    # Convert a cell reference: 'A1' or 'AD2000'
+    res = _re_cell_ref.match(cellrange)
+    if res:
+        row1, col1 = cell_to_rowcol2(res.group(1))
+        return row1, col1, row1, col1
+    raise Exception("Unknown cell reference %s" % (cell))
+
+
+def cell_to_packed_rowcol(cell):
+    """ pack row and column into the required 4 byte format """
+    row, col, row_abs, col_abs = cell_to_rowcol(cell)
+    if col >= MAX_COL:
+        raise Exception("Column %s greater than IV in formula" % cell)
+    if row >= MAX_ROW: # this for BIFF8. for BIFF7 available 2^14
+        raise Exception("Row %s greater than %d in formula" % (cell, MAX_ROW))
+    col |= int(not row_abs) << 15
+    col |= int(not col_abs) << 14
+    return row, col

config/softs/pyExcelerator-0.6.3a.patched/pyExcelerator/Workbook.py

@@ -0,0 +1,576 @@
+#!/usr/bin/env python
+# -*- coding: windows-1251 -*-
+
+#  Copyright (C) 2005 Roman V. Kiseliov
+#  All rights reserved.
+# 
+#  Redistribution and use in source and binary forms, with or without
+#  modification, are permitted provided that the following conditions
+#  are met:
+# 
+#  1. Redistributions of source code must retain the above copyright
+#     notice, this list of conditions and the following disclaimer.
+# 
+#  2. Redistributions in binary form must reproduce the above copyright
+#     notice, this list of conditions and the following disclaimer in
+#     the documentation and/or other materials provided with the
+#     distribution.
+# 
+#  3. All advertising materials mentioning features or use of this
+#     software must display the following acknowledgment:
+#     "This product includes software developed by
+#      Roman V. Kiseliov <roman@kiseliov.ru>."
+# 
+#  4. Redistributions of any form whatsoever must retain the following
+#     acknowledgment:
+#     "This product includes software developed by
+#      Roman V. Kiseliov <roman@kiseliov.ru>."
+# 
+#  THIS SOFTWARE IS PROVIDED BY Roman V. Kiseliov ``AS IS'' AND ANY
+#  EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+#  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+#  PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL Roman V. Kiseliov OR
+#  ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+#  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+#  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+#  HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+#  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+#  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+#  OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+'''
+Record Order in BIFF8
+  Workbook Globals Substream
+      BOF Type = workbook globals
+      Interface Header
+      MMS
+      Interface End
+      WRITEACCESS
+      CODEPAGE
+      DSF
+      TABID
+      FNGROUPCOUNT
+      Workbook Protection Block
+            WINDOWPROTECT
+            PROTECT
+            PASSWORD
+            PROT4REV
+            PROT4REVPASS
+      BACKUP
+      HIDEOBJ 
+      WINDOW1 
+      DATEMODE 
+      PRECISION
+      REFRESHALL
+      BOOKBOOL 
+      FONT +
+      FORMAT *
+      XF +
+      STYLE +
+    ? PALETTE
+      USESELFS
+    
+      BOUNDSHEET +
+    
+      COUNTRY 
+    ? Link Table 
+      SST 
+      ExtSST
+      EOF
+'''
+
+
+__rev_id__ = """$Id: Workbook.py,v 1.5 2005/10/26 07:44:24 rvk Exp $"""
+
+
+import BIFFRecords
+import Style
+from Deco import accepts, returns
+
+
+class Workbook(object):
+
+    #################################################################
+    ## Constructor
+    #################################################################
+    #accepts(object)
+    def __init__(self):
+        self.__owner = 'None'       
+        self.__country_code = 0x07 
+        self.__wnd_protect = 0
+        self.__obj_protect = 0
+        self.__protect = 0        
+        self.__backup_on_save = 0
+        # for WINDOW1 record
+        self.__hpos_twips = 0x01E0
+        self.__vpos_twips = 0x005A
+        self.__width_twips = 0x3FCF
+        self.__height_twips = 0x2A4E
+        
+        self.__active_sheet = 0
+        self.__first_tab_index = 0
+        self.__selected_tabs = 0x01
+        self.__tab_width_twips = 0x0258
+        
+        self.__wnd_hidden = 0
+        self.__wnd_mini = 0
+        self.__hscroll_visible = 1
+        self.__vscroll_visible = 1
+        self.__tabs_visible = 1
+
+        self.__styles = Style.StyleCollection()
+         
+        self.__dates_1904 = 0
+        self.__use_cell_values = 1
+        
+        self.__sst = BIFFRecords.SharedStringTable()
+        
+        self.__worksheets = []
+
+    #################################################################
+    ## Properties, "getters", "setters"
+    #################################################################
+
+    #accepts(object, str)
+    def set_owner(self, value):
+        self.__owner = value
+
+    def get_owner(self):
+        return self.__owner
+
+    owner = property(get_owner, set_owner)
+
+    #################################################################
+
+    #accepts(object, int)
+    def set_country_code(self, value):
+        self.__country_code = value
+
+    def get_country_code(self):
+        return self.__country_code
+
+    country_code = property(get_country_code, set_country_code)
+
+    #################################################################
+
+    #accepts(object, bool)
+    def set_wnd_protect(self, value):
+        self.__wnd_protect = int(value)
+
+    def get_wnd_protect(self):
+        return bool(self.__wnd_protect)
+
+    wnd_protect = property(get_wnd_protect, set_wnd_protect)
+
+    #################################################################
+
+    #accepts(object, bool)
+    def set_obj_protect(self, value):
+        self.__obj_protect = int(value)
+
+    def get_obj_protect(self):
+        return bool(self.__obj_protect)
+
+    obj_protect = property(get_obj_protect, set_obj_protect)
+
+    #################################################################
+
+    #accepts(object, bool)
+    def set_protect(self, value):
+        self.__protect = int(value)
+
+    def get_protect(self):
+        return bool(self.__protect)
+
+    protect = property(get_protect, set_protect)
+    
+    #################################################################
+
+    #accepts(object, bool)
+    def set_backup_on_save(self, value):
+        self.__backup_on_save = int(value)
+
+    def get_backup_on_save(self):
+        return bool(self.__backup_on_save)
+
+    backup_on_save = property(get_backup_on_save, set_backup_on_save)
+
+    #################################################################
+
+    #accepts(object, int)
+    def set_hpos(self, value):
+        self.__hpos_twips = value & 0xFFFF
+
+    def get_hpos(self):
+        return self.__hpos_twips
+
+    hpos = property(get_hpos, set_hpos)
+
+    #################################################################
+
+    #accepts(object, int)
+    def set_vpos(self, value):
+        self.__vpos_twips = value & 0xFFFF
+
+    def get_vpos(self):
+        return self.__vpos_twips
+
+    vpos = property(get_vpos, set_vpos)
+
+    #################################################################
+
+    #accepts(object, int)
+    def set_width(self, value):
+        self.__width_twips = value & 0xFFFF
+
+    def get_width(self):
+        return self.__width_twips
+
+    width = property(get_width, set_width)
+
+    #################################################################
+
+    #accepts(object, int)
+    def set_height(self, value):
+        self.__height_twips = value & 0xFFFF
+
+    def get_height(self):
+        return self.__height_twips
+
+    height = property(get_height, set_height)
+
+    #################################################################
+
+    #accepts(object, int)
+    def set_active_sheet(self, value):
+        self.__active_sheet = value & 0xFFFF
+        self.__first_tab_index = self.__active_sheet
+
+    def get_active_sheet(self):
+        return self.__active_sheet
+
+    active_sheet = property(get_active_sheet, set_active_sheet)
+
+    #################################################################
+
+    #accepts(object, int)
+    def set_tab_width(self, value):
+        self.__tab_width_twips = value & 0xFFFF
+
+    def get_tab_width(self):
+        return self.__tab_width_twips
+
+    tab_width = property(get_tab_width, set_tab_width)
+
+    #################################################################
+
+    #accepts(object, bool)
+    def set_wnd_visible(self, value):
+        self.__wnd_hidden = int(not value)
+
+    def get_wnd_visible(self):
+        return not bool(self.__wnd_hidden)
+
+    wnd_visible = property(get_wnd_visible, set_wnd_visible)
+
+    #################################################################
+
+    #accepts(object, bool)
+    def set_wnd_mini(self, value):
+        self.__wnd_mini = int(value)
+
+    def get_wnd_mini(self):
+        return bool(self.__wnd_mini)
+
+    wnd_mini = property(get_wnd_mini, set_wnd_mini)
+
+    #################################################################
+
+    #accepts(object, bool)
+    def set_hscroll_visible(self, value):
+        self.__hscroll_visible = int(value)
+
+    def get_hscroll_visible(self):
+        return bool(self.__hscroll_visible)
+
+    hscroll_visible = property(get_hscroll_visible, set_hscroll_visible)
+
+    #################################################################
+
+    #accepts(object, bool)
+    def set_vscroll_visible(self, value):
+        self.__vscroll_visible = int(value)
+
+    def get_vscroll_visible(self):
+        return bool(self.__vscroll_visible)
+
+    vscroll_visible = property(get_vscroll_visible, set_vscroll_visible)
+
+    #################################################################
+
+    #accepts(object, bool)
+    def set_tabs_visible(self, value):
+        self.__tabs_visible = int(value)
+
+    def get_tabs_visible(self):
+        return bool(self.__tabs_visible)
+
+    tabs_visible = property(get_tabs_visible, set_tabs_visible)
+
+    #################################################################
+
+    #accepts(object, bool)
+    def set_dates_1904(self, value):
+        self.__dates_1904 = int(value)
+
+    def get_dates_1904(self):
+        return bool(self.__dates_1904)
+
+    dates_1904 = property(get_dates_1904, set_dates_1904)
+
+    #################################################################
+
+    #accepts(object, bool)
+    def set_use_cell_values(self, value):
+        self.__use_cell_values = int(value)
+
+    def get_use_cell_values(self):
+        return bool(self.__use_cell_values)
+
+    use_cell_values = property(get_use_cell_values, set_use_cell_values)
+
+    #################################################################
+
+    def get_default_style(self):
+        return self.__styles.default_style
+
+    default_style = property(get_default_style)
+
+    ##################################################################
+    ## Methods
+    ##################################################################
+
+    #accepts(object, Style.XFStyle)
+    def add_style(self, style):
+        return self.__styles.add(style)
+
+    #accepts(object, (str, unicode))    
+    def add_str(self, s):
+        return self.__sst.add_str(s)
+        
+    #accepts(object, str)    
+    def str_index(self, s):
+        return self.__sst.str_index(s)
+        
+    #accepts(object, (str, unicode))    
+    def add_sheet(self, sheetname):
+        import Worksheet
+        self.__worksheets.append(Worksheet.Worksheet(sheetname, self))
+        return self.__worksheets[-1]
+
+    #accepts(object, int)    
+    def get_sheet(self, sheetnum):
+        return self.__worksheets[sheetnum]
+        
+    ##################################################################
+    ## BIFF records generation
+    ##################################################################
+
+    def __bof_rec(self):
+        return BIFFRecords.Biff8BOFRecord(BIFFRecords.Biff8BOFRecord.BOOK_GLOBAL).get()
+
+    def __eof_rec(self):
+        return BIFFRecords.EOFRecord().get()
+        
+    def __intf_hdr_rec(self):
+        return BIFFRecords.InteraceHdrRecord().get()
+
+    def __intf_end_rec(self):
+        return BIFFRecords.InteraceEndRecord().get()
+
+    def __intf_mms_rec(self):
+        return BIFFRecords.MMSRecord().get()
+
+    def __write_access_rec(self):
+        return BIFFRecords.WriteAccessRecord(self.__owner).get()
+
+    def __wnd_protect_rec(self):
+        return BIFFRecords.WindowProtectRecord(self.__wnd_protect).get()
+
+    def __obj_protect_rec(self):
+        return BIFFRecords.ObjectProtectRecord(self.__obj_protect).get()
+
+    def __protect_rec(self):
+        return BIFFRecords.ProtectRecord(self.__protect).get()
+
+    def __password_rec(self):
+        return BIFFRecords.PasswordRecord().get()
+
+    def __prot4rev_rec(self):
+        return BIFFRecords.Prot4RevRecord().get()
+
+    def __prot4rev_pass_rec(self):
+        return BIFFRecords.Prot4RevPassRecord().get()
+
+    def __backup_rec(self):
+        return BIFFRecords.BackupRecord(self.__backup_on_save).get()
+        
+    def __hide_obj_rec(self):
+        return BIFFRecords.HideObjRecord().get()
+        
+    def __window1_rec(self):
+        flags = 0
+        flags |= (self.__wnd_hidden) << 0
+        flags |= (self.__wnd_mini) << 1
+        flags |= (self.__hscroll_visible) << 3
+        flags |= (self.__vscroll_visible) << 4
+        flags |= (self.__tabs_visible) << 5
+        
+        return BIFFRecords.Window1Record(self.__hpos_twips, self.__vpos_twips, 
+                                self.__width_twips, self.__height_twips, 
+                                flags,
+                                self.__active_sheet, self.__first_tab_index, 
+                                self.__selected_tabs, self.__tab_width_twips).get()
+        
+    def __codepage_rec(self):
+        return BIFFRecords.CodepageBiff8Record().get()
+        
+    def __country_rec(self):
+        return BIFFRecords.CountryRecord(self.__country_code, self.__country_code).get()
+        
+    def __dsf_rec(self):
+        return BIFFRecords.DSFRecord().get()
+        
+    def __tabid_rec(self):
+        return BIFFRecords.TabIDRecord(len(self.__worksheets)).get()
+        
+    def __fngroupcount_rec(self):
+        return BIFFRecords.FnGroupCountRecord().get()
+        
+    def __datemode_rec(self):
+        return BIFFRecords.DateModeRecord(self.__dates_1904).get()        
+
+    def __precision_rec(self):
+        return BIFFRecords.PrecisionRecord(self.__use_cell_values).get()         
+
+    def __refresh_all_rec(self):
+        return BIFFRecords.RefreshAllRecord().get()        
+
+    def __bookbool_rec(self):
+        return BIFFRecords.BookBoolRecord().get()         
+
+    def __all_fonts_num_formats_xf_styles_rec(self):
+        return self.__styles.get_biff_data()
+
+    def __palette_rec(self):
+        result = ''
+        return result
+        
+    def __useselfs_rec(self):
+        return BIFFRecords.UseSelfsRecord().get()
+        
+    def __boundsheets_rec(self, data_len_before, data_len_after, sheet_biff_lens):
+        #  .................................  
+        # BOUNDSEHEET0
+        # BOUNDSEHEET1
+        # BOUNDSEHEET2
+        # ..................................
+        # WORKSHEET0
+        # WORKSHEET1
+        # WORKSHEET2
+        boundsheets_len = 0
+        for sheet in self.__worksheets:
+            boundsheets_len += len(BIFFRecords.BoundSheetRecord(0x00L, sheet.hidden, sheet.name).get())
+        
+        start = data_len_before + boundsheets_len + data_len_after
+        
+        result = ''
+        for sheet_biff_len,  sheet in zip(sheet_biff_lens, self.__worksheets):
+            result += BIFFRecords.BoundSheetRecord(start, sheet.hidden, sheet.name).get()
+            start += sheet_biff_len            
+        return result
+
+    def __all_links_rec(self):
+        result = ''
+        return result
+        
+    def __sst_rec(self):
+        return self.__sst.get_biff_record()
+        
+    def __ext_sst_rec(self, abs_stream_pos):
+        return ''
+        #return BIFFRecords.ExtSSTRecord(abs_stream_pos, self.sst_record.str_placement,
+        #self.sst_record.portions_len).get()
+
+    def get_biff_data(self):
+        before = ''
+        before += self.__bof_rec()
+        before += self.__intf_hdr_rec()
+        before += self.__intf_mms_rec()
+        before += self.__intf_end_rec()
+        before += self.__write_access_rec()
+        before += self.__codepage_rec()
+        before += self.__dsf_rec() 
+        before += self.__tabid_rec() 
+        before += self.__fngroupcount_rec()
+        before += self.__wnd_protect_rec()
+        before += self.__protect_rec()
+        before += self.__obj_protect_rec()
+        before += self.__password_rec()
+        before += self.__prot4rev_rec()
+        before += self.__prot4rev_pass_rec()
+        before += self.__backup_rec()        
+        before += self.__hide_obj_rec()        
+        before += self.__window1_rec()
+        before += self.__datemode_rec()
+        before += self.__precision_rec()
+        before += self.__refresh_all_rec()
+        before += self.__bookbool_rec()
+        before += self.__all_fonts_num_formats_xf_styles_rec()
+        before += self.__palette_rec()
+        before += self.__useselfs_rec()
+        
+        country            = self.__country_rec()
+        all_links          = self.__all_links_rec()
+        
+        shared_str_table   = self.__sst_rec()        
+        after = country + all_links + shared_str_table
+        
+        ext_sst = self.__ext_sst_rec(0) # need fake cause we need calc stream pos
+        eof = self.__eof_rec()
+
+        self.__worksheets[self.__active_sheet].selected = True
+        sheets = ''
+        sheet_biff_lens = []
+        for sheet in self.__worksheets:
+            data = sheet.get_biff_data()
+            sheets += data
+            sheet_biff_lens.append(len(data))
+            
+        bundlesheets = self.__boundsheets_rec(len(before), len(after)+len(ext_sst)+len(eof), sheet_biff_lens)       
+       
+        sst_stream_pos = len(before) + len(bundlesheets) + len(country)  + len(all_links)
+        ext_sst = self.__ext_sst_rec(sst_stream_pos)           
+        
+        return before + bundlesheets + after + ext_sst + eof + sheets
+
+    def save(self, filename):
+        import CompoundDoc
+
+        doc = CompoundDoc.XlsDoc()
+        doc.save(filename, self.get_biff_data())
+
+    def savetostr(self): # XXX ADDED BY EMMANUEL
+        import CompoundDoc
+
+        doc = CompoundDoc.XlsDoc()
+        return doc.savetostr(self.get_biff_data())
+
+if __name__ == '__main__':
+    wb = Workbook()
+    f = file('workbook.bin', 'wb')
+    f.write(wb.get_biff_data())
+    f.close()
+    

config/softs/pyExcelerator-0.6.3a.patched/pyExcelerator/__init__.py

@@ -0,0 +1,27 @@
+#!/usr/bin/env python
+# -*- coding: windows-1251 -*-
+
+__rev_id__ = """$Id: __init__.py,v 1.6 2005/08/11 08:53:48 rvk Exp $"""
+
+import sys
+if sys.version_info[:2] < (2, 4):
+    def sorted(l, cmp=None, key=None, reverse=False):
+        tmp = list(l)
+        tmp.sort(cmp)
+        return tmp
+    import __builtin__
+    __builtin__.sorted = sorted
+    del __builtin__
+##    print >>sys.stderr, "Sorry, pyExcelerator requires Python 2.4 or later"
+##    sys.exit(1)
+
+
+from Workbook import Workbook
+from Worksheet import Worksheet
+from Row import Row
+from Column import Column 
+from Formatting import Font, Alignment, Borders, Pattern, Protection
+from Style import XFStyle 
+from ImportXLS import * 
+
+from ExcelFormula import *